Forschungsbericht 2023
Laser- und Anlagensystemtechnik T-2
Leitung: Emmelmann, Claus
Institut auf TORE
Institutswebsite
The Institute of Laser and System Technologies under direction of Prof. Dr.-Ing. C. Emmelmann is specialized in the fields of:
- Education of engineers and vocational school teachers in product development, laser and systems engineering
- Development of laser based production technology
- Quality assurance of laser based processes and systems
- Consulting and training for industrial customers
Publikationen
-
Development and assessment of a methodology for abstraction of topology optimization results to enable the substitution of optimized beams - Journal Article
Röver, Tim; Bader, Maximilian; Asami, Mohammad Karim; Emmelmann, Claus; Kelbassa, Ingomar
Journal of Laser Applications 35: 042061 (2023-11-03)
Open Access | Publisher DOI
-
Design and numerical assessment of an additively manufactured Schwarz diamond triply periodic minimal surface fluid-fluid heat exchanger - Journal Article
Röver, Tim; Kuehne, Maxim; Bischop, Floyd; Clague, Leighton; Bossen, Bastian; Emmelmann, Claus
Journal of Laser Applications 35 (4): 042071 (2023)
Open Access | Publisher DOI
-
Design optimization of additively manufactured components using simulation-based analysis of infill structures - Conference Paper
Asami, Karim; Roth, Sebastian; Krukenberg, Michel; Emmelmann, Claus
ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023)
Open Access | Publisher DOI
-
Finite Element Analysis of Dynamic Behavior of NREL 5-MW Horizontal Axis Wind Turbine Blade - Conference Paper
Abdullah, Oday Ibraheem; Rakisheva, Zaure; Al-Tamimi, Adnan Naji Jameel; Majeed, Mahir H.; Khazem, Enas A.; Schlattmann, Josef; Mohammed, M. N.; Alfiras, Mohanad; Alani, Zuhair Nafea
IEEE 8th International Conference on Engineering Technologies and Applied Sciences (ICETAS 2023)
Publisher DOI
-
Part and process qualification for serial production - Book part
Emmelmann, Claus; Daniel, Christian
in: Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M., Sun, T. (eds) Handbook of Additive Manufacturing. Springer (2023)
Publisher DOI
-
Predictive modeling of lattice structure design for 316L stainless steel using machine learning in the L-PBF process - Journal Article
Asami, Mohammad Karim; Roth, Sebastian; Röver, Tim; Herzog, Dirk; Emmelmann, Claus; Krukenberg, Michel
Journal of Laser Applications 35 (4): 042046 (2023-10-13)
Open Access
-
Data-driven density prediction of AlSi10Mg parts produced by laser powder bed fusion using machine learning and finite element simulation - Journal Article
Bossen, Bastian; Kuehne, Maxim; Kristanovski, Oleg; Emmelmann, Claus
Journal of Laser Applications 35 (4): 042023 (2023-09-26)
Open Access | Publisher DOI
-
Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V - Journal Article
Li, Gefei; Ganeriwala, Rishi; Herzog, Dirk; Bartsch, Katharina; King, Wayne
Progress in Additive Manufacturing 8 (5): 961-975 (2023-10)
Open Access | Publisher DOI
-
Design guidelines for metal binder jetting - Journal Article
Blunk, Heiko; Seibel, Arthur
Progress in Additive Manufacturing (in Press): (2023)
Open Access | Publisher DOI
-
Entfernbarkeit von Stützstrukturen im pulverbettbasierten Laserstrahlschmelzen von Ti-6Al-4V - Conference Paper
Maiwald, Maria Isabelle; Bartsch, Katharina; Röver, Tim; Emmelmann, Claus
19th Rapid.Tech 3D Conference (2023-05)
Publisher DOI
-
Frictional material selection of dry clutch disc based on the weighted factor and finite element methods - Journal Article
Doos, Qasim M.; Hussain, Ihsan Y.; Al-Sahb, Wassan Abd; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel
Heat Transfer 52 (3): 2838-2858 (2023-05)
Publisher DOI
-
A systematic approach to stable grasping of a two-finger robotic hand activated by jamming of granular media - Journal Article
Fakhri, Osamah; Youssef, George; Nacy, Somer M.; Al-Tamimi, Adnan Naji Jameel; Hussein, O.; Abbood, Wisam T.; Abdullah, Oday Ibraheem; Al-Karkhi, Nazar Kais
Electronics 12 (8): 1902 (2023)
Open Access | Publisher DOI
-
A new correlation for solar radiation incidence angle and dust accumulation of photovoltaic PV systems - Journal Article
Obaid, Nibras M.; Sultan, Hakim S.; Abed, Azher M.; Jweeg, Muhsin Jaber; Kadhim, A. M.; Abdullah, Oday I.
Environmental Research, Engineering and Management 79 (1): 56-68 (2023)
Open Access | Publisher DOI
-
Analysis of modified finite length journal bearing under position perturbation - Journal Article
Jamali, Hazim U.; Aljibori, Hakim S. Sultan; Abdullah, Oday Ibraheem; Al-Tamimi, Adnan Naji Jameel; Al-Masoudy, Murtadha M.; Ruggiero, Alessandro; Valigi, Maria Cristina
Lubricants 11 (4): 173 (2023)
Open Access | Publisher DOI
-
Optimization of small horizontal axis wind turbines based on aerodynamic, steady-state, and dynamic analyses - Journal Article
Deghoum, Khalil; Gherbi, Mohammed Taher; Sultan, Hakim S.; Al-Tamimi, Adnan Naji Jameel; Abed, Azher M.; Alqaisi, Oday Ibraheem Abdullah; Mechakra, Hamza; Boukhari, Ali
Applied System Innovation 6 (2): 33 (2023)
Open Access | Publisher DOI
-
Effect of chamfer form and parameters on the characteristics of finite length journal bearing under impact load - Journal Article
Jamali, Hazim U.; Sultan, Hakim S.; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel; Abbud, Luay Hashem; Ruggiero, Alessandro; Al-Dujaili, Zahraa A.
Lubricants 11 (2): 73 (2023)
Open Access | Publisher DOI
-
Methodology for integrating biomimetic beams in abstracted topology optimization results - Conference Paper
Röver, Tim; Lau, Robert Johannes; Lange, Fritz; Struve, Arnd; Fuchs, Cedrik; Bartsch, Katharina; Seibel, Arthur; Emmelmann, Claus
ASME International Mechanical Engineering Congress and Exposition (IMECE 2022)
Open Access | Publisher DOI
-
The impact of accidents during the transport of dangerous good, on people, the environment, and infrastructure and measures for their reduction: a review - Journal Article
Stojanovic, Nadica; Boskovic, Bojana; Petrovic, Miroslav; Grujic, Ivan; Abdullah, Oday Ibraheem
Environmental Science and Pollution Research 30 (12): 32288-32300 (2023-03-01)
Publisher DOI
-
The influence of the brake pad construction on noise formation, people’s health and reduction measures - Journal Article
Stojanovic, Nadica; Belhocine, Ali; Abdullah, Oday Ibraheem; Grujic, Ivan
Environmental Science and Pollution Research 30 (6): 15352-15363 (2023-02)
Publisher DOI
-
The influence of spoiler on the aerodynamic performances and longitudinal stability of the passenger car under high speed condition - Journal Article
Stojanovic, Nadica; Abdullah, Oday Ibraheem; Grujic, Ivan; Glisovic, Jasna; Belhocine, Ali
Journal of Visualization 26 (1): 97-112 (2023-02)
Publisher DOI
-
Microstructural and mechanical characterization of ledeburitic AISI D2 cold-work tool steel in semisolid zones via direct partial remelting process - Journal Article
Mohammed, M. N.; Omar, M. Z.; Al-Tamimi, Adnan Naji Jameel; Sultan, Hakim S.; Abbud, Luay Hashem; Al-Zubaidi, Salah; Abdullah, Oday Ibraheem; Abdulrazaq, M.
Journal of Manufacturing and Materials Processing 7 (1): 11 (2023-02)
Open Access | Publisher DOI
-
Analysis of the performance of chamfered finite-length journal bearings under dynamic loads - Journal Article
Jamali, Hazim U.; Sultan, Hakim S.; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel; Albdeiri, Mahmood Shaker; Ruggiero, Alessandro; Al-Dujaili, Zahraa A.
Mathematics 11 (3): 587 (2023)
Open Access | Publisher DOI
-
Predicting melt track geometry and part density in laser powder bed fusion of metals using machine learning - Journal Article
Kuehne, Maxim; Bartsch, Katharina; Bossen, Bastian; Emmelmann, Claus
Progress in Additive Manufacturing 8: 47-54 (2023-01-09)
Open Access | Publisher DOI
-
Temperaturadaptive Prozessauslegung für das Laser-Pulver-Auftragschweißen - Doctoral Thesis
Heilemann, Markus
Springer Vieweg (2023)
Publisher DOI
-
Investigation of the influence of sliding speed on thermoelastic problem in the frictional clutch system when applying a constant heat generation - Journal Article
Al Saffar, Iman Q.; Aljibori, Hakim S. Sultan; Jweeg, Muhsin J.; Abed, Azher M.; Abdullah, Oday Ibraheem; Schlattmann, Josef; Sabri, Laith Abed; Alfilh, Raed H.C.
Heat Transfer Research 54 (7): 19-40 (2023)
Publisher DOI
-
Methodische Werkstoff- und Prozessentwicklung für die additive Serienproduktion von automobilen Strukturkomponenten - Doctoral Thesis
Lutz, Andreas
Springer 978-3-662-66532-9: (2023)
-
Potenzialerschließung und -bewertung der sinterbasierten Kolbenextrusion - Doctoral Thesis
Waalkes, Lennart
Springer Vieweg 978-3-662-66882-5: (2023)
-
Digitalization of design for support structures in laser powder bed fusion of metals - Doctoral Thesis
Bartsch, Katharina
Springer Nature Switzerland AG 978-3-031-22955-8: (2023)
Publisher DOI
-
Design optimization of small wind turbine blade based on structural and fatigue life analyses - Journal Article
Deghoum, Khalil; Gherbi, Mohammed Tahar; Jweeg, Muhsin J.; Sultan, Hakim S.; Abed, Azher M.; Abdullah, Oday Ibraheem; Djilani, Necib
International Journal of Energy for a Clean Environment 24 (5): 53-66 (2023)
Publisher DOI
-
Development of a tree-support software module for PBF-LB/M - Conference Paper
Hünting, Jan; Crego Lozares, Jose Manuel; Maiwald, Maria Isabelle; Michael, Jochen; Emmelmann, Claus; Röver, Tim
Lasers in Manufacturing Conference (2023)
-
A study on the wind blade performance using blade element momentum theory - Conference Paper
Abdullah, Oday I.; Ghanim, Marrwa S.; Jweeg, Muhsin Jaber; Sultan, Hakim S.; Abed, Azher M.
AIP Conference Proceedings 2776 (1): 050005 (2023)
Publisher DOI
-
Development of a Hydrogen Metal Hydride Storage Produced by Additive Manufacturing - Conference Paper
Röver, Tim; Roth, Sebastian; Hoffmann, Tom; Lars Baetcke; Herzog, Dirk
27th Conference Low-Temperature Electrolysers, Fuel Cells & H2 Processing (EFCF 2023)
-
Bäume als Stützstrukturen im 3-D-Druck - Journal Article
Hünting, Jan; Michael, Jochen; Röver, Tim; Emmelmann, Claus
Maschinenbau 6: (2023)
Publisher DOI
-
Tree Support Structures in Additive Manufacturing – Efficiency Improvement in 3D Printing and Subtractive Post Processing of Complex Metal Components - Journal Article
Hünting, Jan; Waldschmidt, Johannes; Michael, Jochen; Dias da Silva, Marcel; Emmelmann, Claus; Röver, Tim
Zeitschrift für Wirtschaftlichen Fabrikbetrieb 118 (11): 773-777 (2023)
Publisher DOI
-
Powered education based on metaverse: pre- and post-COVID comprehensive review - Review Article
Alfiras, Mohanad; Bojiah, Janaki; Mohammed, M. N.; Ibrahim, Firas Mohammed; Ahmed, Husham M.; Abdullah, Oday I.
Open Engineering 13 (1): 20220476 (2023)
Open Access | Publisher DOI
-
An investigation of the steady-state and fatigue problems of a small wind turbine blade based on the interactive design approach - Journal Article
Deghoum, Khalil; Gherbi, Mohammed Tahar; Jweeg, Muhsin J.; Sultan, Hakim S.; Abed, Azher M.; Alqaisi, Oday Ibraheem Abdullah; Djilani, Necib
International Journal of Renewable Energy Development 12 (1): 193-202 (2023-01)
Open Access | Publisher DOI
Forschungsdaten
-
Supplementary material to article with title: Development and Assessment of a Methodology for Abstraction of Topology Optimization Results to Enable the Substitution of Optimized Beams - Simulation Data
Röver, Tim; Bader, Maximilian; Asami, Mohammad Karim; Emmelmann, Claus; Kelbassa, Ingomar
Open Access
-
Supplementary material (Version 2) to publication with title: Development of a tree-support software module for PBF-LB/M - Dataset
Hünting, Jan; Michael, Jochen; Maiwald, Maria Isabelle; Emmelmann, Claus; Röver, Tim; Crego Lozares, Jose Manuel
Open Access
-
Supplementary material to extended abstract with title: Development of a Hydrogen Metal Hydride Storage Produced by Additive Manufacturing - Image, 3-D
Röver, Tim; Roth, Sebastian; Hoffmann, Tom; Baetcke, Lars; Herzog, Dirk
Open Access
Projekte
-
DruSint-AM -
Entwicklung einer optimierten Drucksinterroute für die sinterbasierte Additive Fertigung
Laufzeit 2024-2027
Projektleitung: Emmelmann, Claus
Mitarbeitende: Dias da Silva, Marcel
-
KoPro-VR -
Kollaborative Produktentwicklung in der Additiven Fertigung mittels Virtueller Realität
Bundesministerium für Bildung und Forschung (BMBF); Laufzeit 2023-2025
Projektleitung: Mersch, Franz Ferdinand; Emmelmann, Claus
-
BEST -
Bäume als effiziente Stützstrukturen in der additiven Fertigung
Bundesministerium für Bildung und Forschung (BMBF); Laufzeit 2022-2023
Projektleitung: Emmelmann, Claus
-
REDI -
RMIT European Doctoral Innovators Programme
European Commission; Laufzeit 2022-2027
Projektleitung: Emmelmann, Claus
-
KIM -
Künstliche Intelligenz als Mentoring-Lösung für das lebenslange Lernen
Bundesinstitut für Berufsbildung (BIBB); Laufzeit 2021-2024
Projektleitung: Emmelmann, Claus
-
DigitAl -
Digitalisierung der Entwicklung neuer Aluminiumlegierungen für die additive Fertigung mittels künstlicher Intelligenz
Bundesministerium für Bildung und Forschung (BMBF); Laufzeit 2021-2024
Projektleitung: Emmelmann, Claus
-
OptiPro -
Optimierte Nachbearbeitung strukturoptimierter Bauteile innerhalb der hybriden Prozesskette
Bundesministerium für Wirtschaft und Klimaschutz (BMWK); Laufzeit 2021-2023
Projektleitung: Emmelmann, Claus
-
Autoreif -
Entwicklung vollautomatischer mobiler Umreifungssysteme
Bundesministerium für Wirtschaft und Klimaschutz (BMWK); Laufzeit 2021-2023
Projektleitung: Emmelmann, Claus
-
WTM -
I³-LAB Smart Reactors
Behörde für Wissenschaft, Forschung und Gleichstellung; Laufzeit 2018-2023
Projektleitung: Schlüter, Michael; Horn, Raimund; Emmelmann, Claus; Heinrich, Stefan; Liese, Andreas; Smirnova, Irina
Mitarbeitende: Spille, Claas; Niehaus, Daniel; Sichert, Sebastian; Aquino, Andrés; Maiwald, Maria Isabelle; Rothberg, Hannah Sophia; Eixenberger, Daniela; Hu, Xihua; Eckert, Kathrin
Kooperationspartner
- 3D Spark GmbH
- AMR Additive Manufacturing & Research UG
- Autodesk Ltd.
- Element 22 GmbH
- BlueSc.ai GmbH
- CENIT AG
- Centerline Design GmbH
- C-Therm Technologies Ltd.
- Epsilon Ingenierie
- FIT Production GmbH
- Politecnico di Milano
- Fundacion Centro Technologico de Miranda de Ebro
- Fundacion Cidetec
- General Electric Deutschland Holding GmbH
- Lortek S Coop
- Mondragon Goi Eskola Politeknikoa Jose Maria Arizmendiarrieta S Coop
- RMIT Melbourne
- Safran S.A.
- Technische Universität Dresden, Institut für Strömungsmechanik
- consider it GmbH
- Deutsches Zentrum für Luft- und Raumfahrt (DLR); Institut für Technische Thermodynamik
- Fehrmann GmbH
- oncampus GmbH
- LINDER GmbH
- Flughafen Hamburg Gesellschaft mit beschränkter Haftung
- Fraunhofer IAPT
- Hein & Oetting Feinwerktechnik GmbH
- Helmholtz-Zentrum Hereon
- Hoedtke GmbH & Co. KG
- Premium AEROTEC GmbH (OptiWef Antrag)
- SLM Solutions Group AG
- Technische Universität Dortmund, Lehrstuhl für Werkstoffprüftechnik (WPT)
- Universität Bremen, Institut Technik und Bildung
- German Aerospace Center (DLR), Institute for Maritime Energy Systems
- Xerion Berlin Laboratories® GmbH