Professoren | |
Prof. Dr. habil. Michael Morlock Ph.D. (Leitung) | (TUHH) |
Prof. Dr. med. Arndt Schilling | (TUHH) |
Sekretariat | |
Helga Richter | (TUHH) |
Gabriele Lange | (TUHH) |
wissenschaftliche Mitarbeiter/innen | |
Dr.-Ing. Gerd Huber | (TUHH) |
Dr.-Ing. Nick Bishop | (TUHH) |
sonstige Mitarbeiter/innen | |
Dipl.-Ing. Andrea Bluhm | (TUHH) |
Dipl.-Ing. Kay Sellenschloh | (TUHH) |
Dipl.-Ing. Matthias Vollmer | (TUHH) |
Götzen, N., Nassutt, R., Lampe, F. and Morlock, M. (2005), Load-shift - numerical evaluation of a new design philosophy for uncemented hip prostheses. Journal of Biomechanics 38(3):595-604.
Seebeck J., Goldhahn J., Morlock M., Schneider E. (2005), Mechanical Behaviour of Screws in Normal and Osteoporotic Bone. Osteoporosis International 16 Suppl 2:S107-11.
Nagel-Heyer S., Goepfert C., Morlock M. and Pörtner, R. (2005), Relationship between gross morphological and biochemical data of tissue engineered cartilage-carrier-constructs. Biotechnology Letters (27):187-192.
Huber, G., Paetzold, H., Püschel, K., Morlock, M. (2005), Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung. Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1062, Wirtschaftsverlag, Dresden.
Morlock, M., Bishop, N. (2005), The bigger the better - Tribologie aus der Sicht des Großkopfes. Orthopaedic Dimensions 2 / 2005, p. 16-18.
Honl M, Schwieger K, Gauck CH, Lampe F, Morlock MM, Wimmer MA, Hille E. (2005), Comparison of total hip replacements cup orientation and position using different navigation systems and the conventional manual technique. Orthopäde 34(11):1131-6.
Morlock, M. (2005), Editorial. Clinical Biomechanics 20(9):S1.
Morlock, M., Spears, I., Pfleiderer, M., Schneider, E. (2005), Micromotion at the bone-implant interface. Proceedings of the 1st GAMM Seminar on Continuum Biomechanics. Editors. W. Ehlers B. Markert. Report No. II-14, Glückauf Verlag, Essen, p.99-108.
Jin, Z., Meakins, S., Morlock, M., Parsons, P., Hardaker, C., Flett, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 299-309.
Yew, A., Jin, Z., Donn, A., Morlock, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 311-319.
Morlock, M., Bishop, N., Rüther, W., Delling, G., Hahn, M. (2006), Biomechanical, morphological and histological analysis of early failures in hip resurfacing arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 333-344.
Siebel, Th., Maubach, S., Morlock, M. (2006), Lessons Learned from Early Clinical Experience and Results of 300 ASRR Hip Resurfacing Implantations. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 345-353.
Jeffers, J.R.T., Westphal, F.M., Morlock, M.M., Taylor, M., The relationship between the initial mechanical environment and migration in cementless hip arthroplasty: computational and experimental testing. Journal of Orthopaedic Research (submitted)
Morlock, M. (2005), Micromotion at the bone-implant interface. Abstract book, 1st GAMM Seminar on Continuum Biomechanics, p. 13-14, Freudenstadt.
Gebert, A., Stampe, M., Drösser, Th., Wintzer, Ch., Püschel, K., Imig, H., Morlock, M. (2005), Migrationsverhalten von Stentprothesen. Jahrestagung der DGfB, Hamburg, p. 54.
Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M. (2005), Die Maus als Modellorganismus für humane Skeletterkrankungen - eine biomechanische Studie. Jahrestagung der DGfB, Hamburg, p. 21.
Wintzer, Ch., Gebert, A., Debus, S., Imig, H., Morlock, M. (2005); Abdichtung von Stentgraftprothesen. Jahrestagung der DGfB, Hamburg, p. 45.
Westphal, F. Bishop, N., Vollmer, M., Sellenschloh, K., Püschel, K., Morlock, M. (2006), Vergleich der Primärstabilität zwischen einer metaphysär verankerten Hüft- und herkömmlichen Schraftprotheses. Jahrestagung der DGfB, Hamburg, p. 44.
Weichert, H., Gebert, A., Kortmann, H., Morlock, M. (2005), Zugbelastung der End-zu-Seit Anastomose im PTFE-Modell unter Variation der Arteriotomieform. Jahrestagung der DGfB, Hamburg, p. 175.
Seebeck, J., Duda, G., Morlock, M., Schneider, E. (2005), Osteosynthese proximaler Tibiafrakturen durch einen internen Fixateur unter Berücksichtigung individueller Knochenqualitäten. Jahrestagung der DGfB, Hamburg, p. 63.
Götzen, N., Windolf, M., Morlock, M. (2005), Die Genauigkeit des Vicon® Motion-Analysis-Systems - experimentelle Analyse unter Einsatz eines Kalibrier- und Messroboters. Jahrestagung der DGfB, Hamburg, p. 91.
Lechert, B.,Götzen, N., Morlock, M., Wening, J.V. (2005) Proximal verriegelte Hüftendoprothes zur Versorgung von medialen Schenkelhalsfrakturen bei geriatrischen Patienten. Jahrestagung der DGfB, Hamburg, p. 145.
Morlock, M., Westphal, F. (2005), Primary stability of a new short stemmed prosthesis. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 16.
Morlock, M., Meakins, S., Parsons, P., Hardaker, C., Flett, M., Isaac, G., Jin Z. (2005), Optimizing the acetabular cup of a hip surface replacement implant. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 49.
Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. Emerging Orthopaedic Technologies: Where Surgeons & Scientist Meet, Flims, p.68-69.
Westphal, F., Morlock, M. (2005), Migration and relative motion of a new short-stemmed hip prosthesis in comparison with a standard shaft prosthesis. EORS 2005 Lissabon, p. 412.
Gebauer, M., Götzen, N., Morlock, M., Püschel, K., Rueger, J., Amling, M. (2005), Biomechanische Analyse humaner Atlasfrakturen. DGU/DGOOC Berlin 2005, M13-1092.
Gebert, A., Imig, H., Morlock, M. (2005), New Technologies in vascular biomaterials-fundametals about stents. Abstracts of free communications, 4th Symposium of Vascular Biometrials, Strasbourg, May 11-13, p. S1.
Peters, J., Gebert, A., Götzen, N., Westphal, F., Morlock, M. (2005), Pressfit als Fixationsmöglichkeit für den femoralen Oberflächenersatz. Abstracts der Konferenz "Innovative Medizin- und Biotechnologie" in Hamburg, p. 42.
Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a bio-mechanical study. Book of Abstracts, Osteosynthese International 2005, p. 105.
Lechert, B., Götzen, N., Stegmann, J., Wening, J., Morlock, M., Püschel, K. (2005), Certified implant failure - biomechanics and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femur. Book of Abstracts, Osteosynthese International 2005, p. 105.
Morlock, M., Bishop, N., Schönwald, M., Katzer, A., Seibel, O., Püschel, K. (2005), Analysis of a large random sample of post mortem retrieved cemented femoral hip implants. ISALM 2005, Rechtsmedizin 15 (4), p. 288.
Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Tribologie und Zementiertechnik des Oberflächenersatzes - Wunsch und Wirklichkeit. Minimal invasive Endoprothetik: Kein kurzzeitiger Modetrend, 3. Kölner Kongress, Klinik und Poliklinik für Orthopädie, Köln, p.7-9.
Morlock, M. (2005), Tissue Engineering of Articula Cartilage- The Hamburg Situation. Forum innovative Therapies, Hamburg, p. 1.
Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. International Symposium "Resurfacing of the Hip Joint". An Update, Zürich, April 21-22, 2005. Osteologie (14), Nr. 2, p.36-38.
Gebert, A., Peters, J., Westphal, F., Morlock, M. (2006), Nominal versus actual press fit fixation of a femoral resurfacing implant - an experimental and computational evaluation. ORS San Francisco 2006, p. 677.
Westphal, F., Bishop, N., Honl, M., Morlock, M. (2006) Primary stability of a new short-stemmed uncemented hip prosthesis - a biomechanical in-vitro study. ORS San Francisco 2006, p. 480.
Paetzold, H., Huber, G., Morlock, M. (2006), The influence of dynamic load level and loading amplitude on the creep behavior of functional lumbar spinal units. ORS San Francisco 2006, p. 1222.
Honl, M., Schwieger, K., Morlock, M, Schwenke, T., Jacobs, J., Wimmer, M. (2006), The medial approach in primary total hip replacement surgery, a microinvasive single incision technique in a prospective study. ORS San Francisco 2006, p. 449.
Honl, M., Carrero, V., Kemnitz, M., Morlock, M, Schwenke, T., Wimmer, M. (2006), Bone-patellartendon-bone grafts for ACL reconstruction under static and dynamic loading conditions. ORS San Francisco 2006, p. 1148.0
Müller-Bergen, L., Eggers, C., Huber, G., Morlock, M. (2006), Erzeugung von reproduzierbaren Frakturen in mehrsegmentalen Wirbelsäulenabschnitten. DGU Berlin 2006
Gradl, G., Seetz, C., Morlock, M., Sellenschloh, K., Mittlmeier, T. (2006), Anatomische und biomechanische Evaluation eines neuen minimal invasiven Plattensystems zur winkelstabilen Osteosynthese proximaler Humerusfrakturen. DGU Berlin 2006
Rikli, D., Babst, R., Honigmann, P., Morlock, M., Mittlmeier, T. (2006), In vivo Kraftübertragung im radio-ulno-carpalen Gelenk unter physiologischen Bedingungen. DGU Berlin 2006
Jurda, T., Wening, V., Morlock, M., Püschel, K.(2006), Schulter: Frakturen und Rotatorenmanschette. DGU Berlin 2006
Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), Abrieb von Metall-Metall Oberflächenersatzprothesen im Hüftgelenk - Analyse von 90 Revisionspräparaten. DGU Berlin 2006
Gebert, A., Imig, H., Morlock, M. (2006), Investigation of factors influencing the migration of stent-grafts. 5th World Congress of Biomechanics, München 2006
Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), In-vivo wear of hip surface replacements - a comparison of retrievals and simulator results. 5th World Congress of Biomechanics, München 2006
Ilinich, E., Böer, R., Eisenbarth, E., Goepfert, C., Pörtner, R., Morlock, M., Schulte, K. (2006), Biomechanical and biochemical properties of native and in vitro porcine cartilage, a new bioreactor for the cultivation of cartilage with realistic joint loading. 5th World Congress of Biomechanics, München 2006
Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Integrated phenotypical characterization of murine vertebral bone. 5th World Congress of Biomechanics, München 2006
Krug, F., Reinecke, S., Oldenburg, G.v., Morlock, M. (2006), The pelvis compression fixator. 5th World Congress of Biomechanics, München 2006
Mischke, C., Huber, G., Morlock, M.M., Wölfel, H.P. (2006), The influence of individual geometry on the results of a numerical model of the lumbar spine - Experimental data and simulation. 5th World Congress of Biomechanics, München 2006
G. Huber, G., Müller-Bergen, L., Heinze, J., Eggers, C., Püschel, K., Morlock, M.M. (2006), Mechanical stability of augmented spinal segments. 5th World Congress of Biomechanics, München 2006
N.E. Bishop, N. E., Klein, A., Schönwald, M., Hahn, M., Püschel, K., Morlock, M. M. (2006), Assessment of the implant-bone interface in 38 post mortem retrieved femoral components. 5th World Congress of Biomechanics, München 2006
Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Novel Phenotypic Characterization of the Mouse Skeleton. GAMM 2006, Berlin, Germany.
Morlock, M. (2006), Resurfacing and Bone conserving THA - Scientific basis of Hip resurfacing. APAS, Shanghai.
Morlock, M. (2006), Acetabular biomechanics. APAS, Shanghai.
Morlock, M. (2006), Results of retrieval studies. APAS, Shanghai.
Morlock, M. (2006), Science in Arthroplasty I - all about the articulation - Lubrication in Arthroplasty . APAS, Shanghai.
Kleber, R., Maubach, S., Jung, A., Morlock, M., Siebel, Th. (2006), Erste Erfahrungen und klinischen Ergebnissen 2 Jahre nach Oberflächernersatzprothese Typ ASR Abstraktband, 55. Jahrestagung des NOV, Hamburg, S. 25.
Pörtner, R., Wiegandt, K., Heyland, J., Goepfert, C., Nagel-Heyer, S., Schumacher, U., Morlock, M. (2006), Effect of intermittent loading on redifferentiation of chondrocytes and cartilage formation, Fit 2006, Sylt.
Velten, D., Eisenbarth,E., Schanne, N., Breme, J. (2005), Biomedical Oxide Coatings on Ti-alloys prepared by means of the Sol-Gel Process, Biomaterialien (6)1, 2005 : 22-28
Peters, K., Unger, R.E., Eisenbarth, E., Hoffmann, B., Detsch, R., Schäfer, J., Stumpf, S., Breme, J., Ziegler, G., Kirkpatrick, C.J. (2005), The Intercellular Contact as an Indicator for Compatibility of Biomaterials in Endothelial Cells. Biomaterialien 6 (1), 2005: 7-13
Eisenbarth, E. (2005), Nanotechnologically modified Biomaterials:Studienbrief Postgraduate Distance Studies "Nanobiotechnology",ZFUW, TU Kaiserslautern, April 2005
Eisenbarth, E., Velten, D., Breme, J., (2006), Biomimetic Implant Coatings. Biomolecular Engineering, Elsevier, Biomol Eng. 2006 Jun 6; [Epub ahead of print]
Eisenbarth, E., Velten, D., Müller, M., Thull, R., Breme, J. (2006), Nanostructured niobium oxide coatings influence osteoblast adhesion . J Biomed Mater Res A. 2006 Oct;79(1):166-75.
Hornez, N.C., Chai, F., Eisenbarth, E., Traisnel, M., Breme, J., Hildebrand, H. (2006), Cytocompatibility and bio-corrosion of implant alloys in different cell culture systems Biomaterialien 7 (2), 2006, 82-89
Honl, Matthias (2005) Orthopädische Trennverfahren unter besonderer Berücksichtigung des Strahlschneidens. Habilitation. Technische Universität Hamburg-Harburg.
Götzen, N., Gbara, A., Flinzberg, S., Morlock, M. (2005), Winkelstabile Ostesynthesesysteme bei der Versorgung von Unterkiefer- und Mittelgesichtsfrakturen - numerische Untersuchungen zur Primärstabiltät, Jahrestagung der DGfB, Hamburg, p. 71.
Klestil, T., Morlock, M., Schwieger, K., Sellenschloh, K., Curda, B., Biedermann, R., Hennerbichler, A., Schmoelz, W., Rabl, W., Blauth, M. (2006), Migration of Two Different Cementless Hip Arthoplasty Stems in Combination with Two Different Facture Heads - a Biomechanical in vitro Study, Arch Orthop Trauma Surg. 2006 Mar.
Grant, J., Bishop, N., Götzen, N., Sprecher, Ch., Honl, M., Morlock, M. (2006), Artifical composite bone as a model of human trabecular bone: The Implantbone interface, Journal of Biomechanics Jun 26, [Epub ahead of print].
Westphal, F., Bishop, N., Püschel, K., Morlock, M. (2006), Biomechanics of a new short-stemmed uncemented Hip Prothesis - an in-vitro study in human bone, Clin Biomech 21(8):834-40.
Westphal, F., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M. (2006), Migration and cyclic motion of a new short-stemmed Hip Prothesis - a biomechanical in-vitro Study, Hip International, Vol. 16 S-3, p. 22-29, 2006.
Mischke, Ch., Huber, G., Morlock, M.,Wölfel, H. (2006), Validating a numerical model of the lumbar spine with in vitro experiments, Journal of Sound and Vibration (submitted).
Morlock, M. (2006), Die Biomechanik des Fußes, Wintertagung der österreichischen Gesellschaft für Fußchirurgie, Wien, Jatros Orthoädie, Vol. 11, Nr. 1, p. 12-14, 2006.
Morlock, M. (2006), Gleitpaarung heute und morgen, MedReport, Nr. 19, Vol. 30, S. 5, 2006.
Honl, M., Schwieger, K., Schwenke, T., Morlock, M., Wimmer, M. (2006), Plain and Abrasive Water Jet Cutting- A new method in Joint Cartilage Repair, submitted
Honl, M., Schwieger, K., Salineros, M., Jacobs, J., Morlock, M., Wimmer, M. (2006), Orientation of the acetabular component: a comparison of five navigation systems with conventional surgical technique, JBJS-Br, Vol. 88 Nr. 10, p. 1401-1405, 2006.
Huber, G., Morlock, M.M., Ito, K. (2006), Consistent hydration of intervertebral discs during in vitro testing, Medical Engineering & Physics (accepted).
Morlock, M., Rüther, W., Hahn, M., Delling, G. (2006), Wunsch und Wirklichkeit - Tribologie und Implantationstechnik des Oberflächenersatzes, Orthopädie im Profil, Vol. 2, Nr. 1, S. 16-17, 2006.
Carrero, V., Betthäuser, A., Morlock, M., Hille, E., Honl, M. (2005), Fixation Methods for BTB-grafts used in ACL reconstruction - a dynamic in-vitro test, Abstraktband 54. Jahrestagung NOV 2005, Hamburg, P30.
Lechert, B., Götzen, N., Stegmann, J., Wening, J.V., Morlock, M., Püschel, K. (2005), Certified Implant Failure - biomechanical and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femure, Osteosynthese International, Hamburg, O77.
Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a biomechanical study, Osteosynthese International, Hamburg, O104.
Huber, Gerd (2006) Physiologische Bestimmung der mechanischen Eigenschaften von Bandscheiben. Dissertation. Technische Universität Hamburg-Harburg, (AB Zuverlässigkeitstechnik M-24).
Götzen, Nils (2006) Integrated Phenotypical Characterization of the Murine Skeleton. Dissertation. Technische Universität Hamburg-Harburg.
Bishop, Nicholas E. (2006) Mechanical Stimulation of Bone Healing. Dissertation. Technische Universität Hamburg-Harburg.