Professoren | |
Prof. Dr.-Ing. Jörg Weißmüller (Leitung) | (TUHH) |
Prof. Dr.-Ing. Karl Ulrich Kainer | (TUHH/GKSS) |
Prof. Dr. Norbert Huber | (TUHH/GKSS) |
Prof.em. Dr.-Ing. Heinrich Mecking | () |
Sekretariat | |
Haide Alfort-Springer | (TUHH) |
wissenschaftliche Mitarbeiter/innen | |
Dr.-Ing. Christian Hartig | (TUHH) |
Dr. Maxim Smetanin | (TUHH) |
Dipl.-Ing. Daniel Gosslar | (TUHH) |
Dipl.-Phys. Urs Haßlinger | (TUHH) |
sonstige Mitarbeiter/innen | |
Dipl.-Ing. R. Behn | (TUHH) |
C. Plaumann | (TUHH) |
Ulrich Heidenreich | (TUHH) |
W. Schillinger, A. Bartels, K. Kishida: "Mechanical Anisotropy in Textured Sheets of g-TiAl"; in: D.G. Morris, S. Naka, P. Caron (Eds.), Intermetallics and Superalloys, Euromat Vol. 10, Wiley-VCH, (Weinheim, 2000), pp. 378
Liss, K.-D., A. Bartels, H. Clemens, S. Bystrzanowski, A. Stark, T. Buslaps, F.P. Schimansky, R. Gerling, and A. Schreyer, A Study of Recrystallization and Phase Transitions in Intermetallic Titanium Aluminides by In-Situ High-Energy X-Ray Diffraction. Materials Science Forum 2007. 539-543: p. 1519-1524.
Stark, A., A. Bartels, R. Gerling, F.P. Schimansky, and H. Clemens, Microstructure and Texture Formation during Hot Rolling of Niobium-Rich g TiAl Alloys with Different Carbon Contents. Advanced Engineering Materials, 2006. 8(11): p. 10
Schillinger, W., A. Bartels, R. Gerling, F.P. Schimansky, and H. Clemens, Texture evolution of the gamma- and the alpha/alpha(2)-phase during hot rolling of gamma-TiAl based alloys. Intermetallics, 2006. 14(3): p. 336-347
Liss, K.-D., A. Bartels, H. Clemens, S. Bystrzanowski, A. Stark, T. Buslaps, F.-P. Schimansky, R. Gerling, C. Scheu, and A. Schreyer, Recrystallization and phase transitions in a γ-TiAl-based alloy as observed by ex situ and situ high-energy X-ray diffraction. Acta Materialia, 2006. 54: p. 3721-3735
Laser, T., M.R. Nurnberg, A. Janz, C. Hartig, D. Letzig, R. Schmid-Fetzer, and R. Bormann, The influence of manganese on the microstructure and mechanical properties of AZ31 gravity die cast alloys. Acta Materialia, 2006. 54(11): p. 3033-3041
Laser, T., M.R. Nurnberg, C. Hartig, D. Letzig, and R. Bormann. The Influence of Calcium and Cerium Mischmetal on the Deformation Behavior of Mg-3Al-1Zn. in 7th International Conference on Magnesium Alloys and Their Applications. 2006. Dresden: WILEY-VCH
Günther, R., C. Hartig, and R. Bormann. Grain Refinement of AZ31 by (SiC)P: Theoretical Calculation and Experiment. in Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications. 2006. Dresden: Wiley-VCH
Günther, R., C. Hartig, and R. Bormann, Grain refinement of AZ31 by (SiC)P: Theoretical calculation and experiment. Acta Materialia, 2006. 54(20): p. 5591-5597
Ebeling, T., C. Hartig, J. Bohlen, D. Letzig, and R. Bormann. Effects of Calcium on Texture Evolution and Plastic Anisotropy of the Magnesium Alloy AZ31. in Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications. 2006. Dresden: Wiley-VCH
Clemens, H., A. Bartels, S. Bystrzanowski, H. Chladil, H. Leitner, G. Dehm, R. Gerling, and F.P. Schimansky, Grain refinement in gamma-TiAl-based alloys by solid state phase transformations. Intermetallics, 2006. 14(12): p. 1380-1385
Chladil, H.F., H. Clemens, H. Leitner, A. Bartels, R. Gerling, F.P. Schimansky, and S. Kremmer, Phase transformations in high niobium and carbon containing gamma-TiAl based alloys. Intermetallics, 2006. 14(10-11): p. 1194-1198
Hartig, C., A. Styczynski, F. Kaiser, and D. Letzig, Plastic anisotropy and texture evolution of rolled AZ31 magnesium alloys. Icotom 14: Textures of Materials, Pts 1and 2, 2005. 495-497: p. 1615-1620
Bystrzanowski, S., A. Bartels, H. Clemens, R. Gerling, F.-P. Schimansky, and G. Dehm, Creep Behavior and Microstructural Stability of Ti-46Al-9Nb with Different Microstructures, in Integrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society Symposium Proceedings. 2005, Materials Research Society: Pittsburgh, PA, USA. p. 7.12.1-7.12.6
Bystrzanowski, S., A. Bartels, H. Clemens, R. Gerling, F.P. Schimansky, G. Dehm, and H. Kestler, Creep behaviour and related high temperature microstructural stability of Ti-46Al-9Nb sheet material. Intermetallics, 2005. 13: p. 515¿524
Bartels, A., S. Bystrzanowski, H. Chadil, H. Leitner, H. Clemens, R. Gerling, and F.-P. Schimansky, Massive Transformation in High Niobium Containing TiAl-Alloys, in Mater. Res. Soc. Symp. Proc. 2005, Materials Research Society. p. 5.48.1-5.48.6
Weller, M., H. Clemens, G. Dehm, A. Bartels, S. Bystrzanowski, R. Gerling, and E. Arzt, Mechanical sprectroscopy of a high-NB-bearing g-TiAl-based alloy with near-gamma and fully lamellar microstructure. Philosophical Magazine Letters, 2004. 84(6): p. 383-393
Styczynski, A., C. Hartig, J. Bohlen, and D. Letzig, Cold rolling textures in AZ31 wrought magnesium alloy. Scripta Materialia, 2004. 50: p. 943-947
Schillinger, W., A. Bartels, R. Gerling, and H. Clemens, Texture Formation during Hot- Rolling of g-TiAl, in Ti-2003 Science and Technologie, G. Lütjering and J. Albrecht, Editors. 2004, Wiley-VCH: Weinheim. p. 2385-2400
Clemens, H., F. Appel, A. Bartels, H. Bauer, R. Gerling, V. Günter, and H. Kestler, Processing and Application of Engineering g-TiAl Based Alloys, in Ti-2003 Science and Technologie, G. Lütjering and J. Albrecht, Editors. 2004, Wiley-VCH: Weinheim. p. 2123-2136
Bystrzanowski, S., A. Bartels, R. Gerling, F.P. Schimansky, H. Clemens, H. Kestler, G. Dehm, and M. Weller, Creep Properties and Texture of High Niobium Containing g-TiAl Sheet Material, in Ti-2003 Science and Technologie, G. Lütjering and J. Albrecht, Editors. 2004, Wiley-VCH: Weinheim. p. 2401-2408
Styczynski, A., Hartig, Ch., Bormann, R., Kaiser, P., Bohlen, J., Letzig, D. Texture Formation and Texture Modelling of AZ31 Magnesium Wrought Alloy. in 6th Int. Conf. "Magnesium Alloys and Their Applications". 2003
Laser, T., Hartig, Ch., Bormann, R., Bohlen, L., Letzig, D. . Dynamic Recrystallization of Mg 3AI 1Zn. in 6th Int. Conf. "Magnesium Alloys and Their Applications". 2003
Kaiser, F., D. Letzig, J. Bohlen, A. Styczynski, C. Hartig, and K.U. Kainer, Anisotropic properties of magnesium sheet AZ31, in Magnesium Alloys 2003, Pts 1 and 2. 2003. p. 315-320
Kaiser, F., J. Bohlen, D. Letzig, K.U. Kainer, A. Styczynski, and C. Hartig. Correlation of microstructure and mechanical properties of rolled magnesium sheet AZ31. in 2003 International Conference Magnesium Alloys and Their Applications. 2003. Wolfsburg, DE: Wiley-VCH, Weinheim
Kaiser, F., J. Bohlen, D. Letzig, K.U. Kainer, A. Styczynski, and C. Hartig, Influence of rolling conditions on the microstructure and mechanical properties of magnesium sheet AZ31. Advanced Engineering Materials, 2003. 5(12): p. 891-896
D. Gosslar, R. Günther, C. Hartig, R. Bormann, J. Zollinger, and I. Steinbach, Grain Refinement of ¿-TiAl Alloys by Inoculation, in Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, M. Palm, et al., Editors. 2009, Materials Research Society: Warrendale. p. 91-96.
D. Gosslar, C. Hartig, R. Günther, U. Hecht, and R. Bormann, Heterogeneous nucleation and growth of the beta(Ti) phase in the Ti-Al system-experiments and model calculations. Journal of Physics-Condensed Matter, 2009. 21(46): p. 1-7.
D. Gosslar, R. Günther, U. Hecht, C. Hartig, and R. Bormann, Grain refinement of TiAl-based alloys: The role of TiB2 crystallography and growth. Acta Materialia, 2010. 58: p. 6744-6751.
C. Hartig, R. Günther, D. Gosslar, and R. Bormann, Model calculation of inoculation and experimental verification in two alloy-systems. International Journal of Materials Research, 2010(5): p. 572-576.
U. Haßlinger, Ch. Hartig, R. Günther and R. Bormann : Effects of ceramic inoculants and rare earth phases on
microstructure and related mechanical properties of magnesium alloys. in
Magnesium: Proceedings of the 8th International Conference on Magnesium
Alloys and Their Applications. 2009. Weimar: Wiley-VCH.