Amirali Khosrozadeh
- Address
-
Hamburg University of Technology
Solids Process Engineering and Particle Technology
Denickestraße 15 (K)
21073 Hamburg - Office
-
Building K
Room 2506 - Phone
-
Tel: +49 40 30601 2340
MO: +49 157 37864888
- amirali.khosrozadeh(at)tuhh.de
Research project
Frozen particle-fluid systems are granular materials held together by ice bridges between the grains, for example frozen soils, sea-ice rubble, frozen food and cryo-granulated products. Their strength and breakage are controlled not by the bulk but by how the individual ice bonds fail.
In my doctoral project I combine discrete-element simulations with a bonded-particle model (BPM, in the open-source solver MUSEN), mechanical testing at sub-zero temperatures and in-situ X-ray micro-computed tomography. The aim is a bond model whose parameters are measured on the bonds themselves and not only fitted to bulk tests.
Research interests
- Discrete element method (DEM) and bonded-particle models of frozen and cohesive granular materials
- Inverse identification of material parameters: multi-objective optimisation, Tikhonov regularisation, Gauss–Newton methods
- AI-based surrogate modelling and Bayesian optimisation for model calibration
- In-situ cryo micro-CT, 3D image analysis and digital volume correlation of damage evolution
- Fracture mechanics and cohesive-zone models of interfaces (grain–ice interface, composite delamination)
Methods and equipment
- Self-built in-situ cryo-compression stage for the micro-CT (Peltier cooling, stepper-driven loading, 500 N load cell)
- Uniaxial compression, three-point bending and shear tests on ice-bonded glass, alumina and sand at −5 to −15 °C
- 3D image analysis with Dragonfly, SPAM and PuMA; grain-resolved segmentation and tracking
- DEM/BPM simulation in MUSEN; FEM in ABAQUS
Videos
- How we built an in-situ cryogenic compression device for micro-CT – design, cooling and loading of the stage used for 4D micro-CT of ice-bonded specimens.
- Inverse identification of frozen particle–fluid systems: DEM, micro-CT and Bayesian optimisation – narrated talk, PBM 2026.
More videos on my YouTube channel.
Photo gallery
Graphical abstracts
Publications
Journal articles
- Khosrozadeh, A., Khosravifard, A., Pietsch-Braune, S., Heinrich, S. (2026). Multi-objective inverse identification of meso-scale parameters of bonded particle model of frozen particle systems. Powder Technology 483, 122838 (open access). doi:10.1016/j.powtec.2026.122838
- Uzoh, C.F., Pietsch-Braune, S., Lindmüller, L., Hildebrandt, N., Khosrozadeh, A., Heinrich, S. (2026). Reactive ethylene-maleic anhydride bioresin incorporating aminated lignin improves coating uniformity and mechanical durability of fluidized-bed coated urea. Chemical Engineering Journal Advances, 101558.
- Khosrozadeh, A., Khosravifard, A., Rajabi, I. (2023). Inverse identification of material constants of various cohesive laws for delamination of composites using experimental results. Composite Structures 303, 116241. doi:10.1016/j.compstruct.2022.116241
Submitted
- Khosrozadeh, A., Hadi, A., Pietsch-Braune, S., Schott, D., Heinrich, S. Adaptive Bayesian optimisation for surrogate-based multi-objective calibration of bonded-particle model parameters in frozen particle-fluid systems. Submitted to Powder Technology.
- Khosrozadeh, A., Sinnwell, Y., Pietsch-Braune, S., Nikolaus, K., Antonyuk, S., Heinrich, S. Grain-scale kinematics and damage evolution in ice-bonded granular media under in-situ uniaxial compression. Submitted to Powder Technology.
Conference papers
- Khosrozadeh, A., Patel, B.V., Kochan, K. (2024). First experimental studies of active noise control in an aircraft cabin demonstrator. Fortschritte der Akustik (DAGA 2024, Hannover), 596–599.
- Patel, B.V., Khosrozadeh, A., Kochan, K. (2024). Implementation of active noise control on an embedded system. Fortschritte der Akustik (DAGA 2024, Hannover), 75–78.
- Khosrozadeh, A., Khosravifard, A., Rajabi, I. (2021). Identification of material parameters of the cohesive law in delamination of laminated composites. 29th Annual International Conference of the Iranian Society of Mechanical Engineers (ISME).
Conference contributions
Upcoming
- From grain-scale ice-bond failure to calibrated DEM models: in-situ micro-CT, inverse identification and Bayesian optimisation for frozen particle systems. 12th International Conference on Conveying and Handling of Particulate Solids (CHoPS 2027), Delft, the Netherlands, 6–9 July 2027.
2026
- Inverse identification and adaptive Bayesian optimisation for calibrating bonded-particle models of frozen particle-fluid systems. Talk, Particle-Based Materials Symposium (PBM 2026), Duisburg, Germany, 7–8 October 2026.
- In-situ micro-computed tomography of frozen granular packings: grain-scale ice-bond failure and the role of particle morphology. Poster, Particle-Based Materials Symposium (PBM 2026), Duisburg, Germany, 7–8 October 2026.
- Identification of the mechanical parameters of frozen particle fluid systems using adaptive AI-based surrogate modelling. Oral presentation, 10th World Congress on Particle Technology (WCPT10), Osaka, Japan, 11–15 May 2026.
- Identification of the mechanical parameters of frozen particle fluid systems using adaptive AI-based surrogate modelling. Talk, Fachgruppentreffen Agglomerations- und Schüttguttechnik (DECHEMA/VDI), Dresden, Germany, 16–18 March 2026.
2025
- Inverse identification of the mechanical parameters and coupling with improved internal structural analysis of frozen particle fluid systems. Poster, PARTEC 2025, Nuremberg, Germany, 23–25 September 2025.
- 11th International Granulation Workshop, Hamburg, Germany, 2–4 July 2025.
- Inverse identification of the mechanical parameters and coupling with improved internal structural analysis of frozen particle fluid systems. Poster, Workshop “Biobased Processes and Reactor Technologies”, TUHH, Hamburg, Germany, 24 June 2025.
- Inverse identification of the mechanical parameters and coupling with improved internal structural analysis of frozen particle fluid systems. Talk, Jahrestreffen der DECHEMA/VDI-Fachgruppen Agglomerations- und Schüttguttechnik sowie Trocknungstechnik, Friedrichshafen, Germany, 1–3 April 2025.
2024
- First experimental studies of active noise control in an aircraft cabin demonstrator. Talk, DAGA 2024 (50th Annual Meeting on Acoustics), Hannover, Germany.
Full list: Google Scholar
Curriculum vitae
- Since 07/2024: Doctoral researcher, Institute of Solids Process Engineering and Particle Technology (SPE), Hamburg University of Technology
- 10/2023 – 07/2024: Research assistant, Hamburg University of Applied Sciences (HAW): active noise control in an A320 cabin demonstrator, project CATECO (with Airbus and DLR)
- 11/2019 – 07/2023: Mechanical design engineer, PIDEC, Shiraz, Iran: static equipment (heat exchangers, pressure vessels) for oil, gas and petrochemical plants
- 2018 – 2021: M.Sc. Mechanical Engineering, Shiraz University. Thesis: inverse identification of cohesive-zone parameters for delamination of composite laminates
- 2014 – 2018: B.Sc. Mechanical Engineering, Shiraz University
Awards and activities: DAAD travel grant (Kongressreisen) for WCPT10, Osaka 2026 · Peer reviewer for Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer Nature)
Theses and student jobs
Bachelor, master and project theses as well as student assistant (HiWi) positions on cold test rigs, single ice-bond tests, micro-CT image analysis and DEM simulation are available. See Theses & Jobs or contact me directly.