Publikationen / Publications

190.T. Würger, C. Feiler, F. Musil, G. B. V. Feldbauer, D. Höche, S. V. Lamaka, M. L. Zheludkevich, R. H. Meißner: Data Science Based Mg Corrosion Engineering. Front. Mater. (2019). (projects A4, A8)
189.B. Bor, D. Giuntini, B. Domènech, M.V. Swain and G.A. Schneider: Nanoindentation-based study of the mechanical behavior of bulk supercrystalline ceramic-organic nanocomposites. J. Eur. Ceram. Soc. (2019). open access (project A6)
188.H. Jelitto and G.A. Schneider: Fracture toughness of porous materials - Experimental methods and data. Data in Brief 23, 103709 (2019). open access (project A6)
187.M. Graf, D. Jalas, J. Weissmüller, A.Yu. Petrov and M. Eich: Surface-to-Volume Ratio Drives Photoelelectron Injection from Nanoscale Gold into Electrolyte. ACS Catalysis 9, 3366-3374 (2019). (projects C1, B2)
186.B. Domènech, M. Kampferbeck, E. Larsson, T. Krekeler, B. Bor, D. Giuntini, M. Blankenburg, M. Ritter, M. Müller, T. Vossmeyer, H. Weller, G.A. Schneider: Hierarchical supercrystalline nanocomposites through the self-assembly of organically-modified ceramic nanoparticles. Scientific Reports 9, 3435 (2019). open access (projects A1, A6, Z2, Z3)
185.S. Ma, I. Scheider and S. Bargmann: Ultrastrong nanocomposites with interphases: Nonlocal deformation and damage behavior. Eur. J. Mech. A Solids 75, 93-108 (2019) (project A5)
184.E.H. Hill, C. Hanske, A. Johnson, L. Yate, H. Jelitto, G.A. Schneider and L.M. Liz-Marzán: Metal Nanoparticle Growth within Clay – Polymer Nacre – Inspired Materials for Improved Catalysis and Plasmonic Detection in Complex Biofluids. Langmuir 33 (35), 8774-8783 (2017) (project A6)
183.C. Soyarslan, H. Argeso and S. Bargmann: Skeletonization-based beam finite element models for stochastic bicontinuous materials: Application to simulations of nanoporous gold. J. Mater. Res 33, 3371-3382 (2018) (project B6)
182.L. Maiwald, S. Lang, D. Jalas, H. Renner, A.Y. Petrov and M. Eich: Ewald sphere construction for structural colors. Opt. Express 26, 1-14 (2018) open Access (projects C1, C2)
181.C.W. Wiegand, R. Faust, A. Meinhardt, R. Blick, R. Zierold and K. Nielsch: Understanding the growth mechanisms of multilayered systems in atomic layer deposition processes. Chem. Mater.30, 1971-1979 (2018) (project C3)
180.M. Storm, F. Beckmann and C. Rau: Analytical registration of vertical image drifts in parallel beam tomographic data. Optics Letters 42, 1-4 (2017) open Access (project Z2)
179.S. Garlof, M. Mecklenburg, D. Smazna, Y.K. Mishra, R. Adelung, K. Schulte and B. Fiedler: 3D carbon networks and their polymer composites: Fabrication and electromechanical investigations of neat Aerographite and Aerographite-based PNCs under compressive load. Carbon 111, 103-112 (2017) (project B1)
178.I. Greving, M. Ogurreck, F. Marschall, A. Last, F. Wilde, T. Dose, H. Burmester, L. Lottermoser, M. Müller, C. David and F. Beckmann: Nanotomography endsation at the P05 beamline: Status and perspectives. J. Phys.: Conf. Ser. 849, 012056 (2017) open Access (project Z2)
177.V. Pot, S. Peth, O. Monga, L.E. Vogel, A. Genty, P. Garnier, L. Vieublé-Gonod, M. Ogurreck, F. Beckmann and P.C. Baveye: Three-dimensional distribution of water and air in soil pores: Comparison of two-phase two-relaxation-times lattice-Boltzmann and morphological model outputs with synchrotron X-ray computed tomography data. Adv. Water. Res. 84, 87-102 (2016) (project Z2)
176.S. Chandrasekaran, W.V. Liebig, M. Mecklenburg, B. Fiedler, D. Smazna, R. Adelung and K. Schulte: Fracture, failure and compression behaviour of a 3D interconnected carbon aerogel (Aerographite) epoxy composite. Compos. Sci. Technol 122, 50-58 (2016) (project B1)
175.J.G. Pereira da Silva, H.A. Al-Qureshi, F. Keil and R. Janssen: A dynamic bifurcation criterion for thermal runaway during the flash sintering of ceramics. J. Eur. Ceram. Soc. 36, 1261-1267 (2016) (project C5)
174.T.I.W. Schnoor, U. Vainio, L-H Shao, E.T. Lilleodden, M. Müller, A. Schreyer, K. Schulte and B. Fiedler: Nanostructured MWCNT/Polypyrrole actuators with anisotropic strain response. Adv. Eng. Mater.18, 597-607 (2016) (projects B1, B2, B4, Z2)
173.S. Gruener, D. Wallacher, S. Greulich, M. Busch and P. Huber: Hydraulic transport across hydrophilic and hydrophobic nanopores: Flow experiments with water and n-hexane. Phys. Rev. E 93, 013102 (2016) (project B7)
172.S. Moerz, and P. Huber: pH-dependent selective protein adsorption into mesoporous silica. J. Phys. Chem. C 119, 27072-27079 (2015) open Access (project B7)
171.A. Spende, N. Sobel, M. Lukas, R. Zierold, J.C. Riedl, L. Gura, I. Schubert, J.M. Montero Moreno, K. Nielsch, B. Stühn, C. Hess, C. Trautmann, M.E. Toimil-Molares: TiO2, SiO2, and Al2O3 coated nanopores and nanotubes produced by ALD in etched ion-track membranes for transport measurements. Nanotechnology 26, 1-11 (2015) open Access (project C3)
170.H. Schlicke, D. Battista, S. Kunze, C.J. Schröter, M. Eich, and T. Vossmeyer: Freestanding membranes of cross-linked gold nanopoarticles: Novel functional materials for electrostatic actuators. ACS Appl. Mater. Interfaces 7, 15123-15128 (2015). (projects C1, C2)
169.P. Sergelius, J.M. Montero Moreno, M. Waleczek, T. Böhnert, D. Görlitz and K. Nielsch: Magnon contribution to the magnetoresistance of iron nanowires deposited using pulsed electrodeposition. Phys. Status Solidi RRL 9, 255-258 (2014) (project C3)
168.S. Calus, B. Jablonska, M. Busch, D. Rau, P. Huber and A.V. Kityk: Paranematic-to-nematic ordering of a binary mixture of rod-like liquid crystals confined in cylindrical nanochannels. Phys. Rev. E 89, 062501 (2014). (project B7)
167.A.W. Maijenburg, J. Veerbeek, J.R. de Putter, S.A. Veldhuis, M.G.C. Zoontjes, G. Mul, J.M. Montero Moreno, K. Nielsch, H. Schäfer, M. Steinhart, and J.E. ten Elshof : Electrochemical synthesis of coaxial TiO2-Ag nanowires and their application in photocatalytic water splitting.  J. Mater. Chem. A 2, 2648-2656 (2014). open Access (project C3)
166.Schwenger, S. Romeis, P. Herre, T. Yokosawa, M. Finsel, E.W. Leib, H. Weller, T. Vossmeyer, E. Spiecker and W. Peukert: Pressure induced local phase transformation in nanocrystalline tetragonal zirconia microparticles. Scripta Materialia 163, 86-90 (2019). (project C6)
165.E. Larsson, D. Gürsoy, F. De Carlo, E. Lilleodden, M. Storm, F. Wilde, K. Hu, M. Müller and I. Greving: Nanoporous gold: a hierarchical and multiscale 3D test pattern for characterizing X-ray nano-tomography systems. J. Synchrotron Rad. 26 (2019). open access (projects B2, B4, Z2)
164.A. Feld, A. Weimer, A. Kornowski, N. Winckelmans, J.-P. Merkl, H. Kloust, R. Zierold, C. Schmidtke, T. Schotten, M. Riedner, S. Bals and H. Weller: Chemistry of shape-controlled iron oxide nanocrystal formation. ACS Nano (2018). (project A1)


N. Mameka, L. Lührs, S. Heissler, H. Gliemann, C. Wöll: Tailoring the strength of nanoporous gold by self-assembled monolayers of alkanethiols. ACS Appl. Nano Mater. (2018).  (projects B2, B8)
162.K.P. Furlan, E. Larsson, A. Diaz, M. Holler, T. Krekeler, M. Ritter, A.Yu. Petrov, M. Eich, R. Blick, G.A. Schneider, I. Greving, R. Zierold, R. Janßen: Dataset of ptychographic X-ray computed tomography of inverse opal photonic crystals produced by atomic layer deposition. Data in Brief 21, 1924-1936 (2018). open Access (projects C5, C2, Z2, Z3)
161.K.P. Furlan, E. Larsson, A. Diaz, M. Holler, T. Krekeler, M. Ritter, A.Yu. Petrov, M. Eich, R. Blick, G.A. Schneider, I. Greving, R. Zierold, R. Janßen: Photonic materials for high-temperature applications: Synthesis and characterization by X-ray ptychographic tomography. Appl. Mater. Today 13, 359-369 (2018). open Access (projects C5, C2, Z2, Z3)


N. Huber: Connections between topology and macroscopic mechanical properties of three-dimensional open-pore materials. Frontiers in Materials 5:69 (2018). open access (project B4)
159.O. Márkus, I. Greving, E. Kornemann, M. Storm, F. Beckmann, J. Mohr and A. Last: Optimizing illumination for full field imaging at high brilliance hard X-ray synchrotron sources. Optics Express 26(23), 30435-30443 (2018). open access (project Z2)
158.E. Rahmstorf and V. Abetz: Supramolecular networks from block copolymers based on styrene and isoprene using hydrogen bonding motifs - Part 2: Dynamical mechanical analysis. Materials 11(9), 1688 (2018). open access (project A2)
157.E. Rahmstorf and V. Abetz: Supramolecular networks from block copolymers based on styrene and isoprene using hydrogen bonding motifs - Part 1: Synthesis and characterization. Materials 11(9), 1608 (2018). open access (project A2)
156.E. Eichner, P.-K. Fischer, S. Heinrich and G.A. Schneider: Production of composites with high relative permittivity using the spouted bed technique. Particuology (2018). (projects A3, A6)
155.P. Bueno, K.P. Furlan, D. Hotza and R. Janßen: High-temperature stable inverse opal photonic crystals via mullite-sol-gel infiltration of direct photonic crystals. J. Amer. Ceram. Soc. (2018). open access (project C5)
154.T. Würger, W. Heckel, K. Sellschopp, S. Müller, A. Stierle, Y. Wang, H. Noei and G. Feldbauer: Adsorption of Acetone on Rutile TiO2: A DFT and FTIRS Study. J. Phys. Chem. C 122, 19481−19490 (2018). (project A4, A7)
153.G.Y. Gor, P. Huber and J. Weissmüller: Elastocapillarity in nanopores: Sorption strain from the actions of surface tension and surface stress. Phys. Rev. Materials 2, 086002 (2018). (project B2, B7)
152.E. Blandre, D. Jalas, A.Yu. Petrov and M. Eich: Limit of efficiency of generation of hot electrons in metals and their injection inside a semiconductor using a semiclassical approach. ACS Photonics 5(9), 3613-3620 (2018). (project C1)
151.E. Eichner, S. Heinrich and G.A. Schneider: Influence of particle shape and size on mechanical properties in copper-polymer composites. Powder Technol. 339, 39-45 (2018). (project A3, A6)
150.S. Shi, J. Markmann and J. Weissmüller: Synthesis of uniform bulk nanoporous palladium with tunable structure. Electrochimica Acta 285, 60-69 (2018). open access (project B2, B8)
149.S. Bargmann, B. Klusemann, J. Markmann, J.E. Schnabel, K. Schneider, C. Soyarslan and J. Wilmers: Generation of 3D representative volume elements for heterogeneous materials: A review. Progress in Materials Science 96, 322-384 (2018). open access (project, A5, B6, B8)
148.G. Shang, L. Maiwald, H. Renner, D. Jalas, M. Dosta, S. Heinrich, A. Yu. Petrov and M. Eich: Photonic glass for high contrast structural color. Scientific Reports 8, 7804 (2018). open access (project C2, A3)
147.H. Jelitto and G.A. Schneider: A geometric model for the fracture toughness of porous materials. Acta Materialia 151, 443-453 (2018). open access (project A6)
146.C. Richert and N. Huber: Skeletonization, geometrical analysis, and finite element modeling of nanoporous gold based on 3D tomography data. Metals 8, 282 (2018).
open access (project B4)
145.J. Wilmers and S. Bargmann: Functionalisation of metal-polymer-nanocomposites: Chemoelectromechanical coupling and charge carrier transport. Extreme Mechanics Letters 21, 57-64 (2018).
open access (project B6)
144.E. Wittenberg, A. Meyer, S. Eggers and V. Abetz: Hydrogen bonding and thermoplastic elastomers - a nice couple with temperature-adjustable mechanical properties. Soft Matter 14, 2701-2711 (2018). open access (project A2)
143.C. Soyarslan, S. Bargmann, M. Pradas and J. Weissmüller: 3D stochastic bicontinuous microstructures: Generation, topology and elasticity. Acta Materialia 149, 326-340 (2018). open access (project B2, B6)
142.G. Feldbauer, M. Wolloch, P.O. Bedolla, J. Redinger, A. Vernes and P. Mohn: Suppression of material transfer at contacting surfaces: the effect of adsorbates on Al/TiN and Cu/diamond interfaces from first-principles calculations. J. Phys.: Condens. Matter 30, 105001 (2018). open access (project A4)
141.K. Sentker, A.W. Zantop, M. Lippmann, T. Hofmann, O.H. Seeck, A.V. Kityk, A. Yildirim, A. Schönhals, M.G. Mazza and P. Huber: Quantized self-assembly of discotic rings in a liquid crystal confined in nanopores. Phys. Rev. Lett. 120, 067801 (2018). open access (project B7, Z3)
140.H.-J. Jin, J. Weissmüller and D. Farkas: Mechanical response of nanoporous metals: A story of size, surface stress, and severed struts. MRS Bulletin 43, 35-42 (2018). (project B2)
139.E.T. Lilleodden and P.W. Voorhees: On the topological, morphological, and microstructural characterization of nanoporous metals. MRS Bulletin 43, 20-26 (2018). (project B4, B8)
138.J. Weissmüller and K. Sieradzki: Dealloyed nanoporous materials with interface-controlled behavior. MRS Bulletin 43, 14-19 (2018).
(project B2)
137.H. Özcoban, E.D. Yilmaz and G.A. Schneider: Hierarchical microcrack model for materials exemplified at enamel. Dental Materials 34, 69-77 (2018). open access (project A6)
136.K.P. Furlan, T. Krekeler, M. Ritter, R. Blick, G.A. Schneider, K. Nielsch, R. Zierold and R. Janßen: Low-temperature mullite formation in ternary oxide coatings deposited by ALD for high-temperature applications. Adv. Mater. Interfaces 4, 1700912 (2017). open access (project C3, C5, Z3)
135.N. Mameka, J. Markmann and J. Weissmüller: On the impact of capillarity for strength at the nanoscale. Nat. Commun 8, 1976 (2017).
open access (project B2, B8)
134.M. Busch, A.V. Kityk, W. Piecek, T. Hofmann, D. Wallacher, S. Calus, P. Kula, M. Steinhart, M. Eich and P. Huber: A ferroelectric liquid crystal confined in cylindrical nanopores: reversible smectic layer buckling, enhanced light rotation and extremely fast electro-optically active Goldstone excitations. Nanoscale 9, 19086-19099 (2017). open access (project B7, C2, Z3)
133.A. Feld, R. Koll, L.S. Fruhner, M. Krutyeva, W. Pyckhout-Hintzen, C. Weiß, H. Heller, A. Weimer, C. Schmidtke, M.-S. Appavou, E. Kentzinger, J. Allgaier and H. Weller: Nanocomposites of highly monodisperse encapsulated superparamagnetic iron oxide nanocrystals homogeneously dispersed in a poly(ethylene oxide) melt. ACS Nano 11, 3767-3775 (2017).
(project A1)
132.N. Nafsin, H. Li, E.W. Leib, T. Vossmeyer, P. Stroeve and R.H.R. Castro: Stability of rare-earth-doped spherical yttria-stabilized zirconia synthesized by ultrasonic spray pyrolysis. J. Am. Ceram. Soc. 100, 4425-4434 (2017). (project C6)
131.J.G. Pereira da Silva, A.N. Yamchelou, A. Debris, C. Wieck, H. Jelitto, H.A. Al-Qureshi and R. Janßen: Mechanical strength and defect distributions in flash sintered 3YSZ. J. Eur. Ceram. Soc. 37, 2901-2905 (2017). (project C5)
130.S.J. Eder, U. Cihak-Bayr, D. Bianchi, G. Feldbauer and G. Betz: Thermostat influence on the structural development and material removal during abrasion of nanocrystalline ferrite. ACS Appl. Mater. Interfaces 9, 13713-13725 (2017).
(project A4)
129.J. Jiao and N. Huber: Effect of nodal mass on macroscopic mechanical properties of nanoporous metals. Int. J. Mech. Sci. 134, 234-243 (2017).
open access (project B4)
128.S. Lang, G. Sharma, S. Molesky, P.U. Kränzien, T. Jalas, Z. Jacob A.Yu. Petrov and M. Eich: Dynamic measurements of near-field radiative heat transfer. Scientific Reports 7,13916 (2017).
open access (project C1), press release (German only), #44 of the top 100 most read Sci. Rep. physics publications in 2017
127.E. Griffiths, S. Bargmann and B.D. Reddy: Elastic behaviour at the nanoscale of innovative composites of nanoporous gold and polymer. Extreme Mechanics Letters 17, 16-23 (2017).
open access (project B6)
126.L. Lührs, B. Zandersons, N. Huber and J. Weissmüller: Plastic Poisson's ratio of nanoporous metals: A macroscopic signature of tension-compression asymmetry at the nanoscale. Nano Lett. 17(10), 6258-6266 (2017). open access (project B2, B4)
125.W. Heckel, T. Würger, S. Müller and G. Feldbauer: Van der Waals interaction really matters: Energetics of benzoic acid on TiO2 rutile surfaces. J. Phys. Chem. C 121(32),17207-17214 (2017). (project A4)
124.T. Juarez, J. Biener, J. Weissmüller and A.M. Hodge: Nanoporous metals with structural hierarchy: A review. Adv. Eng. Mater. 19, 1700389 (2017). (project B2)
123.P. Georgopanos, G.A. Schneider, A. Dreyer, U.A. Handge, V. Filiz, A. Feld, E.D. Yilmaz, T. Krekeler, M. Ritter, H. Weller and V. Abetz: Exceptionally strong, stiff and hard hybrid material based on an elastomer and isotropically shaped ceramic nanoparticles. Scientific Reports 7, 7314 (2017). open access (project A1, A2, A6, Z3)
122.E. Wittenberg and V. Abetz: New post modification route for styrene butadiene copolymers leading to supramolecular hydrogen bonded networks - Synthesis and thermodynamic analysis of complexation. Polymer 121, 304-311 (2017). (project A2)
121.K.P. Furlan, R.M. Pasquarelli, T. Krekeler, M. Ritter, R. Zierold, K. Nielsch, G.A. Schneider and R. Janßen: Highly porous α-Al2O3 ceramics obtained by sintering atomic layer deposited inverse opals. Ceram. Int. 43, 11260-11264 (2017). open access (project C3, C5, Z3)
120.O. Parlak, Y.K. Mishra, A. Grigoriev, M. Mecklenburg, W. Luo, S. Keene, A. Salleo, K. Schulte, R. Ahuja, R. Adelung, A.P.F. Turner and A. Tiwari: Hierarchical aerographite nano-microtubular tetrapodal networks based electrodes as lightweight supercapacitor. Nano Energy 34, 570-577 (2017). (project B1)
119.O. Lupan, V. Postica, J. Marx, M. Mecklenburg, Y.K. Mishra, K. Schulte, B. Fiedler and R. Adelung: Individual hollow and mesoporous aero-graphitic microtube based devices for gas sensing applications. Appl. Phys. Lett. 110, 263109 (2017). (project B1)
118.F. Lechermann, W. Heckel, O. Kristanovski and S. Müller: Oxygen-vacancy driven electron localization and itinerancy in rutile-based TiO2. Phys. Rev. B 95, 195159 (2017).
(project A4)
117.U. Herzog, A. Winter and C. Kautz: Cross-disciplinary communication among Ph.D. candidates: How to make it work. ZFHE 12(2), 91-105 (2017). open access (project MGK)
116.K. Schneider, B. Klusemann and S. Bargmann: Fully periodic RVEs for technological relevant composites: Not worth the effort! J. Mech. Mater. Struct. 12(4), 471-484 (2017). (project A5, B6)
115.C. Soyarslan, E. Husser and S. Bargmann: Effect of surface elasticity on the elastic response of nanoporous gold. J. Nanomech. Micromech. 7(4), 04017013 (2017). open access (project B6)
114.S. Drücker, J. Wilmers and S. Bargmann: Influence of the microstructure on effective mechanical properties of carbon nanotube composites. Coupled Systems Mechanics 6(1), 1-15 (2017). (project B6)
113.P. Georgopanos, E. Eichner, V. Filiz, U.A. Handge, G.A. Schneider, S. Heinrich and V. Abetz: Improvement of mechanical properties by a polydopamine interface in highly filled hierarchical composites of titanium dioxide particles and poly(vinyl butyral). Compos. Sci. Technol. 146, 73-82 (2017). (project A2, A3, A6)
112.R. Meija, S. Signetti, A. Schuchardt, K. Meurisch, D. Smazna, M. Mecklenburg, K. Schulte, D. Erts, O. Lupan, B. Fiedler, Y.K. Mishra, R. Adelung and N.M. Pugno: Nanomechanics of individual aerographite tetrapods. Nature Communications 8, 14982 (2017). open access (project B1)
111.K. Wang, C. Stenner and J. Weissmüller: A nanoporous gold-polypyrrole hybrid nanomaterial for actuation. Sens Actuators B Chem 248, 622-629 (2017). (project B2)
110.D. Jalas, L.-H. Shao, R. Canchi, T. Okuma, S. Lang, A. Petrov, J. Weissmüller and M. Eich: Electrochemical tuning of the optical properties of nanoporous gold. Sci. Rep. 7, 44139 (2017). open access (project C1, B2)
109.G.Y. Gor, P. Huber and N. Bernstein: Adsorption-induced deformation of nanoporous materials - A review. Appl. Phys. Rev. 4, 011303 (2017). open access (project B2, B7), top 10 most cited research from Applied Physics Reviews in 2017
108.E. Eichner, V. Salikov, P. Bassen, S. Heinrich and G.A. Schneider: Using dilute spouting for fabrication of highly filled metal-polymer composite materials. Powder Technol. 316, 426-433 (2017). (project A3, A6)
107.E. Husser, C. Soyarslan and S. Bargmann: Size affected dislocation activity in crystals: advanced surface and grain boundary conditions. Extreme Mechanics Letters, 13, 36-41 (2017). open access (project B6)
106.L. Nazarenko, S. Bargmann and H. Stolarski: Closed-form formulas for the effective properties of random particulate nanocomposites with complete Gurtin-Murdoch model of material surfaces. Continuum Mech. Thermodyn., 29, 77-96 (2017). (project B6)
105.T. Krekeler, A.V. Straßer, M. Graf, K. Wang, C. Hartig, M. Ritter and J. Weissmüller: Silver-rich clusters in nanoporous gold. Mater. Res. Lett. 5(5), 314-321 (2017). open access (project B2, Z3)
104.B.-N.D. Ngô, B. Roschning, K. Albe, J. Weissmüller and J. Markmann: On the origin of the anomalous compliance of dealloying-derived nanoporous gold. Scripta Materialia 130, 74-77 (2017). (project B2, B8)
103.J. Jiao and N. Huber: Deformation mechanisms in nanoporous metals: Effect of ligament shape and disorder. Comp. Mat. Sci. 127, 194-203 (2017). open access (project B4)
102.J. Wilmers, A. McBride and S. Bargmann: Interface elasticity effects in polymer-filled nanoporous metals. J. Mech. Phys. Solids 99, 163-177 (2017). open access (project B6)
101.B.A.M. Elsner, S. Müller, S. Bargmann and J. Weissmüller: Surface excess elasticity of gold: Ab initio coefficients and impact on the effective elastic response of nanowires. Acta Materialia 124, 468-477 (2017). open access (project B2, B3, B6)
100.B. Klusemann, S. Bargmann and Y. Estrin: Fourth-order strain-gradient phase mixture model for nanocrystalline fcc materials. Modelling Simul. Mater. Sci. Eng. 24, 085016 (2016). open access (project B6)
99.J.J. do Rosário, J.B. Berger, E.T. Lilleodden, R.M. McMeeking and G.A. Schneider: The stiffness and strength of metamaterials based on the inverse opal architecture. Extreme Mechanics Letters 12, 86-96 (2017). open access (project A6, B4, C4)
98.M. Ogurreck, J.J. do Rosário, E.W. Leib, D. Laipple, I. Greving, F. Marschall, A. Last, G.A. Schneider, T. Vossmeyer, H. Weller, F. Beckmann and M. Müller: Determination of the packing fraction in photonic glass using synchrotron radiation nanotomography. J. Synchrotron Rad. 23, 1440-1446 (2016). open access (project C4, C6, Z2)
97.K. Wang, C. Hartig, M. Blankenburg, M. Müller, R. Günther and J. Weissmüller: Local flow stresses in interpenetrating-phase composites based on nanoporous gold - In situ diffraction. Scr. Mater. 127, 151-155 (2017). open access (project B2, Z2)
96.L. Nazarenko, S. Bargmann and H. Stolarski: Lurie solution for spherical particle and spring layer model of interphases: Its application in analysis of effective properties of composites. Mech. Mater. 96, 39-52 (2016). open access (project B6)
95.K. Schneider, B. Klusemann and S. Bargmann: Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites. Adv. Eng. Softw. 99, 177-188 (2016). open access (project B6)
94.O. Lupan, V. Postica, M. Mecklenburg, K. Schulte, Y.K. Mishra and B. Fiedler, R. Adelung: Low powered, tunable and ultra-light Aerographite sensor for climate relevant gas monitoring. J. Mater. Chem. A 4, 16723-16730 (2016).
(project B1)
93. S. Behr, L. Jungblut, M.V. Swain and G.A. Schneider: Shear strength and interfacial toughness characterization of sapphire-epoxy interfaces for nacre-inspired composites. ACS Appl. Mater. Interfaces 8(40), 27322-27331 (2016). (project A6)
92.X. Gao, P. Huber, Y. Su, W. Zhao and D. Wang: Two-step freezing in alkane monolayers on colloidal silica nanoparticles: From a stretched-liquid to an interface-frozen state. J. Phys. Chem. B 120, 7522-7528 (2016). (project B7)
91.V. Soprunyuk, W. Schranz and P. Huber: Dynamic mechanical analysis of supercooled water in nanoporous confinement. EPL 115, 46001 (2016). (project B7)
90.S. Behr, A. Köllner and G.A. Schneider: Tailoring toughness and mechanical reliability by controlled defects: Nature-inspired composite laminates of laser-perforated yttria-stabilized zirconia. Adv. Eng. Mater. 18(11), 1877-1883 (2016). A6)
89.S. Ma, I. Scheider and S. Bargmann: Anisotropic constitutive model incorporating multiple damage mechanisms for multiscale simulation of dental enamel. J. Mech. Behav. Biomed. Mater. 62, 515-533 (2016). open access (project A5, B6)
88.S. Garlof, T. Fukuda, M. Mecklenburg, D. Smazna, Y.K. Mishra, R. Adelung, K. Schulte and B. Fiedler: Electro-mechanical piezoresistive properties of three dimensionally interconnected carbon aerogel (Aerographite)-epoxy composites. Compos. Sci. Technol. 134, 226-233 (2016). (project B1)
87.I. Tiginyanu, L. Ghimpu, J. Gröttrup, V. Postolache, M. Mecklenburg, M.A. Stevens-Kalceff, V. Ursaki, N. Payami, R. Feidenhansl, K. Schulte, R. Adelung and Y.K. Mishra: Strong light scattering and broadband (UV to IR) photoabsorption in stretchable 3D hybrid architectures based on Aerographite decorated by ZnO nanocrystallites. Sci. Rep. 6, 32913 (2016).
open access (project B1)
86.K. Hu, M. Ziehmer, , W. Ke and E.T. Lilleodden: Nanoporous gold: 3D structural analyses of representative volumes and their implications on scaling relations of mechanical behaviour. Philos. Mag. 96, 3322-3335 (2016). (project B2, B4)
85.M. Ziehmer, K. Hu, W. Ke and E.T. Lilleodden: A principle curvatures analysis of the isothermal evolution of nanoporous gold: Quantifying the characteristic length scales. Acta Materialia 120, 24-31 (2016). open access (project B4, B2)
84.E.W. Leib, R.M. Pasquarelli, M. Blankenburg, M. Müller, A. Schreyer, R. Janßen, H. Weller and T. Vossmeyer: High-temperature stable zirconia particles doped with yttrium, lanthanum, and gadolinium. Part. Part. Syst. Charact. 33(9), 645-655 (2016). open access (project C5, C6, Z2, A1)
83.T. Hofmann, D. Wallacher, J. Perlich, S.K. Vayalil and P. Huber: Formation of periodically arranged nanobubbles in mesopores: Capillary bridge formation and cavitation during sorption and solidification in an hierarchical porous SBA-15 matrix. Langmuir 32, 2928-2936 (2016).
(project B7)
82.S. Calus, M. Busch, A.V. Kityk, W. Piecek and P. Huber: Chiral phases of a confined cholesteric liquid crystal: Anchoring-dependent helical and smectic self-assembly in nanochannels. J. Phys. Chem. C 120, 11727-11738 (2016). (project B7)
81.C. Stenner, L.-H. Shao, N. Mameka and J. Weissmüller: Piezoelectric gold - Strong charge-load response in a metal-based hybrid nanomaterial. Adv. Funct. Mater. 26(28), 5174-5181 (2016). open access (project B2)
80.C. Lamprecht, M. Taale, I. Paulowicz, H. Westerhaus, C. Grabosch, A. Schuchardt, M. Mecklenburg, M. Böttner, R. Lucius, K. Schulte, R. Adelung and C. Selhuber-Unkel: A tunable scaffold of microtubular graphite for 3D cell growth. ACS Appl. Mater. Interfaces 8(24), 14980-14985 (2016). open access (project B1)
79.P.N. Dyachenko, S. Molesky, A.Yu. Petrov, M. Störmer, T. Krekeler, S. Lang, M. Ritter, Z. Jacob and M. Eich: Controlling thermal emission with refractory epsilon-near-zero metamaterials via topological transitions. Nature Communications 7, 11809 (2016). open access (project C1, Z3)
78.M. Ekh and S. Bargmann: A framework for geometrically non-linear gradient extended crystal plasticity coupled to heat conduction and damage. Multiscale and Multiphysics Mechanics. 1(2), 171-188 (2016). (project B6)
77.S. Ma, I. Scheider and S. Bargmann: Continuum damage modeling and simulation of hierarchical dental enamel. Modelling Simul. Mater. Sci. Eng. 24, 045014 (2016).
(projects A5, B6)
76.R. Kubrin, R.M. Pasquarelli, M. Waleczek, H.S. Lee, R. Zierold, J.J. do Rosário, P.N. Dyachenko, J.M. Montero Moreno, A.Yu. Petrov, R. Janßen, M. Eich, K. Nielsch and G.A. Schneider : Bottom-up fabrication of multilayer stacks of 3D photonic crystals from titanium dioxide. ACS Appl. Mat. Interfaces 8, 10466-10476 (2016). (projects C2, C3, C4, C5, C6)
75.B. Roschning, N. Huber: Scaling laws of nanoporous gold under uniaxial compression: Effects of structural disorder on the solid fraction, elastic Poisson's ratio, Young's modulus and yield strength. J. Mech. Phys. Solids 92, 55-71 (2016). open access (projects B4, B2)
74.P. Georgopanos, U.A. Handge, C. Abetz, V. Abetz: Influence of block sequence and molecular weight on morphological, rheological and dielectric properties of weakly and strongly segregated styrene-isoprene triblock copolymers. Polymer 104, 279-295 (2016). (project A2)
73.P. Georgopanos, V. Filiz, U.A. Handge, V. Abetz: Chemical modification, thermal characterization and dielectric spectroscopy of polystyrene-block-polyisoprene diblock copolymers. Macromol. Chem. Phys., 217(11), 1293-1304 (2016).
(project A2)
72.A. Dreyer, A. Feld, A. Kornowski, E.D. Yilmaz, H. Noei, A. Meyer, T. Krekeler, C. Jiao, A. Stierle, V. Abetz, H. Weller and G.A. Schneider: Organically linked iron oxide nanoparticle supercrystals with exceptional isotropic mechanical properties. Nat. Mater. 15, 522-528 (2016). (projects A6, A1, A2, Z3), listed in the top 10 most downloaded Nat. Mater. article in recent weeks (2016-02-12), press release (German only), article on
71.A. Petrov, H. Lehmann, M. Finsel, C. Klinke, H. Weller and T. Vossmeyer: Synthesis and characterization of monodisperse metallodielectric SiO2@Pt@SiO2 core–shell–shell particles. Langmuir 32, 848-857 (2016). (projects C6, A1)
70.E.W. Leib, R. Pasquarelli, J.J. do Rosário, P.N. Dyachenko, S. Döring, A. Puchert, A.Yu. Petrov, M. Eich, G.A. Schneider, R. Janßen, H. Weller and T. Vossmeyer: Yttria-stabilized zirconia microspheres: novel building blocks for high-temperature photonics. J. Mater. Chem. C 4, 62-74 (2016). open access, inside cover (projects C6, C2, C4, C5, A1)
69.S. Bargmann, C. Soyarslan, E. Husser and N. Konchakova: Materials based design of structures: Computational modeling of the mechanical behavior of gold-polymer nanocomposites. Mech. Mater. 94, 53-65 (2016). open access (project B6)
68.U.A. Handge, M.F.H. Wolff, V. Abetz and S. Heinrich: Viscoelastic and dielectric properties of composites of poly(vinyl butyral) and alumina particles with a high filling degree. Polymer 82, 337-348 (2015).
(projects A2, A3)
67.W. Heckel, M. Wehlau, S.B. Maisel, T. Frauenheim, J.M. Knaup and S. Müller: How the aggregation of oxygen vacancies in rutile-based TiO2 phases causes memristive behavior. Phys. Rev. B 92, 214104 (2015). (project A4)
66.Feld, A. A universal approach to ultrasmall magneto-fluorescent nanohybrids. Angew. Chem. Int. Ed. 54, 12468-12471 (2015). (project A1)
65.S.-A. Biehs, S. Lang, A. Yu. Petrov, M. Eich and P. Ben-Abdallah: Blackbody theory for hyperbolic materials. Phys. Rev. Lett. 115, 17, 174301-1-174301-5 (2015). (project C1)
64.N. Mameka, K. Wang, J. Markmann, E.T. Lilleodden and J. Weissmüller: Nanoporous gold - Testing macro-scale samples to probe small-scale mechanical behavior. Mater. Res. Lett. 4(1), 27-36 (2015). open access (projects B2, B4)
63.L.S. Fohrmann, A.Yu. Petrov, S. Lang, D. Jalas, T.F. Krauss, M. Eich: Single mode thermal emission. Opt. Express 23, 21 27672-27682 (2015).
open access (project C1)
62.H. Kloust, R. Zierold, J.-P. Merkl, C. Schmidtke, A. Feld, E. Pöselt, A. Kornowski, K. Nielsch and H. Weller: Synthesis of iron oxide nanorods using a template mediated approach. Chem. Mater. 27, 4914-4917 (2015).
(projects C3, A1)
61.M. Coll, J.M. Montero Moreno, J. Gazquez, K. Nielsch, X. Obradors and T. Puig: Low temperature stabilization of nanoscale epitaxial spinel ferrite thin films by atomic layer deposition. Adv. Funct. Mater. 24, 5368-5374 (2014).
(project C3)
60.C. Schmidtke, R. Eggers, R. Zierold, A. Feld, H. Kloust, C. Wolter, J. Ostermann, J.-P. Merkl, T. Schotten, K. Nielsch and H. Weller: Polymer-assisted self-assembly of superparamagnetic iron oxide nanoparticles into well-defined clusters: Controlling the collective magnetic properties. Langmuir 30, 11190-11196 (2014). (projects C3, A1)
59.P. Sergelius, J.M. Montero Moreno, W. Rahimi, M. Waleczek, R. Zierold, D. Görlitz, Detlef and K. Nielsch: Electrochemical synthesis of highly ordered nanowires with a rectangular cross section using an in-plane nanochannel array. Nanotechnology 25, 504002-1-504002-10 (2014). (project C3)
58.R. Zierold, C. Le Lam, J. Dendooven, J. Gooth, T. Böhnert, P. Sergelius, F. Munnik, J.M. Montero Moreno, D. Görlitz, C. Detavernier and K. Nielsch: Magnetic characterization and electrical field-induced switching of magnetite thin films synthesized by atomic layer deposition and subsequent thermal reduction. J. Phys. D: Appl. Phys. 47, 485001-1-485001-10 (2014). (project C3)
57.B. Crüger, V. Salikov, S. Heinrich, V.S. Sutkar and N.G. Deen: Coefficient of restitution for particles impacting on wet surfaces: An improved experimental approach. Particuology 25, 1-9 (2015).
(projects A3, A6)
56.M. F. H. Wolff, S. Antonyuk, S. Heinrich and G.A. Schneider: Attritor-milling of poly(amide imide) suspensions. Particuology 17, 92-96 (2014).
open access (projects A3, A6)
55.P. N. Dyachenko, J. J. do Rosário, E. W. Leib, A. Yu. Petrov, M. Störmer, H. Weller, T. Vossmeyer, G. A. Schneider and M. Eich: Tungsten band edge absorber/emitter based on a monolayer of ceramic microspheres. Opt. Express 23, A1236-A1244 (2015).
open access (projects C1, C2, C4, C6)
54.L. Lührs, C. Soyarslan, J. Markmann, S. Bargmann and J. Weissmüller: Elastic and plastic Poisson's ratios of nanoporous gold. Scripta Materialia 110, 65-69 (2015). open access (projects B2, B6)
53.S. Calus, L. Borowik, A.V. Kityk, M. Eich, M. Busch and P. Huber: Thermotropic interface and core relaxation dynamics of liquid crystals in silica glass nanochannels: a dielectric spectroscopy study. Phys. Chem. Chem. Phys., 17, 22115–22124 (2015).
(projects B, C2)
52.R. M. Pasquarelli, J. J. do Rosário, L. Rath, G. A. Schneider and R. Janßen: High temperature behavior of monodisperse porosity in alumina films. J. Eur. Ceram. Soc. 35, 3917–3926 (2015).
(projects C4, C5)
51.B. A. M. Elsner and S. Müller: Size effects and strain localization in atomic-scale cleavage modeling. J. Phys.: Condens. Matter 27, 345002 (2015). (project B3), selected by the editors for inclusion in IOPselect
50.G. Y. Gor, L. Bertinetti, N. Bernstein, T. Hofmann, P. Fratzl, and P. Huber: Elastic response of mesoporous silicon to capillary pressures in the pores. Appl. Phys. Lett. 106, 261901 (2015).
(project area B)
49.R. Besler, M. Rossetti da Silva, J. J. do Rosario, M. Dosta, S. Heinrich and R. Janßen: Sintering simulation of periodic macro porous alumina. J. Am. Ceram. Soc. 98, 3496-3502 (2015).
(projects A3, C4, C5)
48.S. Behr, U. Vainio, M. Müller, A. Schreyer and G.A. Schneider: Large-scale parallel alignment of platelet-shaped particles through gravitational sedimentation. Sci. Rep. 5, 9984 (2015).
open access (projects A6, Z2)
47.U. A. Handge, T. G. Haenelt, P. Georgopanos, C. Abetz, S. Rangou, D. Alisch, U. Vainio, A. Meyer and V. Abetz: Analysis of stability and viscoelastic properties of melts of polystyrene-block-polyisoprene diblock copolymers in oscillatory shear and creep-recovery experiments. AIP Conf. Proc. 1664, 170001 (2015).
open access (projects A2, Z2)
46.R. Pasquarelli, H. S. Lee, R. Kubrin, R. Zierold, A. Yu. Petrov, K. Nielsch, G. A. Schneider, M. Eich and R. Janßen: Enhanced structural and phase stability of titania inverse opals. J. Eur. Ceram. Soc. 35, 3103-3109 (2015). (projects C2, C3, C4, C5)
45.M. Mecklenburg, D. Mizushima, N. Ohtake, W. Bauhofer, B. Fiedler and K. Schulte: On the manufacturing and electrical and mechanical properties of ultra-high wt.% fraction aligned MWCNT and randomly oriented CNT epoxy composites. Carbon 91, 275-290 (2015). (project B1)
44.M. Tschikin, S.-A. Biehs, P. Ben-Abdallah, S. Lang, A. Yu. Petrov and M. Eich: Radiative heat flux predictions in hyperbolic metamaterials. J. Quant. Spectrosc. Radiat. Transf. 158, 17-26 (2015).
(project C1)
43.K. Wang, A. Kobler, C. Kübel, H. Jelitto, G. Schneider and J. Weissmüller: Nanoporous-gold-based composites: towards tensile ductility. NPG Asia Mater. 7, e187 (2015). open access (projects B2, A6)
42.B.-N. D. Ngô, A. Stukowski, N. Mameka, J. Markmann, K. Albe and J. Weissmüller: Anomalous compliance and early yielding of nanoporous gold. Acta Materialia 93, 144-155 (2015).
(project B2)
41.S. Storm, M. Ogurreck, D. Laipple, C. Krywka, M. Burghammer, E. Di Cola and M. Müller: On radiation damage in FIB prepared softwood samples measured bay scanning X-ray diffraction. J. Synchrotron Rad. 22(Pt 2),267-72 (2015). (project Z2)
40.G. Hofmann, A. Rochet, E. Ogel, M. Casapu, S. Ritter, M. Ogurreck and J.-D. Grunwaldt: Aging of a Pt/AI203 exhaust gas catalyst monitored by quasi in situ X-ray micro computed tomography. RSC Advances 5, 6893 (2015). open access (project Z2)
39.I. Greving, F. Wilde, M. Ogurreck, J. Herzen, J. U. Hammel, A. Hipp, F. Friedrich, L. Lottermoser, T. Dose, H. Burmester, M. Müller and F. Beckmann: P05 imaging beamline at Petra III - First results. Proc. of SPIE 9212, 92120O (2014).
(project Z2)
38.J. J. do Rosário, E. T. Lilleodden, M. Waleczek, R. Kubrin, A. Y. Petrov, P. N. Dyachenko, J. E. C. Sabisch, K. Nielsch, N. Huber, M. Eich and G. A. Schneider: Self-assembled ultra high strength, ultra stiff mechanical metamaterials based on inverse opals. Adv. Eng. Mater. 17(10), 1420-1424 (2015). (projects A6, B4, C2, C3, C4)
37.Z. Qi, U. Vainio, A. Kornowski, M. Ritter, H. Weller, H. Jin, and J. Weissmüller: Porous gold with a nested-network architecture and ultrafine structure. Adv. Funct. Mater. 25, 2530-2536 (2015). open access (projects B2, C6, Z2, Z3)
36.E. W. Leib, U. Vainio, R. M. Pasquarelli, J. Kus, Chr. Czaschke, N. Walter, R. Janssen, M. Müller, A. Schreyer, H. Weller, and T. Vossmeyer: Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres. J. Colloid Interface Sci. 448, 582 (2015). open access (projects C5, C6, Z2)
35.S. Calus, A. V. Kityk, M. Eich, and P. Huber: Inhomogeneous relaxation dynamics and phase behaviour of a liquid crystal confined in a nanoporous solid. RSC Soft Matter 11, 3176-3187 (2015). (projects C2, B)
34.A. Schuchardt, T. Braniste, Y. K. Mishra, M. Deng, M. Mecklenburg, M. A. Stevens-Kalceff, S. Raevschi, K. Schulte, L. Kienle, R. Adelung, and I. Tiginyanu: Three-dimensional Aerographite-GaN hybrid networks: Single step fabrication of porous and mechanically flexible materials for multifunctional applications. Sci. Rep. 5, 8839 (2015). open access (project B1)
33.R. Kubrin, J.J. do Rosario, and G. Schneider: Transparent nanophosphor films with high quantum efficiency through cold compaction. RSC Advances 5, 25555 (2015). (projects A6, C2, C4)
32.L. Nazarenko, S. Bargmann, and H. Stolarski: Energy-equivalent inhomogeneity approach to analysis of effective properties of nanomaterials with stochastic structure. International Journal of Solids and Structuress 59, 183-197 (2015). open archive (project B6)
31.P. Huber: Topical Review: Soft matter in hard confinement: phase transition thermodynamics, structure, texture, diffusion and flow in nanoporous media. J. Phys.: Condens. Matter 27, 103102 (2015). (project area B)
30.I. Scheider, T. Xiao, E. Yilmaz, G. Schneider, N. Huber, and S. Bargmann: Damage modeling of small scale experiments on dental enamel with hierarchical microstructure. Acta Biomaterialia 15, 244 (2015). open access (projects A6, B4, B6)
29.D. Jalas, R. Canchi, A. Yu. Petrov, S. Lang, L. Shao, J. Weissmüller, and M. Eich: Effective medium model for the spectral properties of nanoporous gold in the visible. App. Phys. Lett. 105, 241906 (2014). (projects C1, B2)
28.N.S. Ottosen, M. Ristinmaa, and J. Mosler: Fundamental physical principles and cohesive zone models at finite displacements -- Limitations and possiblilities. International Journal of Solids and Structures 53, 70 (2015).
open archive (project B3)
27.P.N. Dyachenko, J.J. do Rosàrio, E.W. Leib, A. Yu. Petrov, R. Kubrin, G.A. Schneider, H. Weller, T. Vossmeyer, and M. Eich: Ceramic photonic glass for broadband omnidirectional reflection. ACS Photonics 1, 1127 (2014). (projects C2, C4, C6)
26.T. G. Haenelt, P. Georgopanos, C. Abetz, S. Rangou, D. Alisch, A. Meyer, U.A. Handge, and V. Abetz: Morphology and elasticity of polystyrene-block-plyisoprene diblock copolymers in the melt. Korea-Australia Rheology J. 26, 263, (2014).
(project A2)
25.J.J. do Rosário, P.N. Dyachenko, R. Kubrin, R.M. Pasquarelli, A.Yu. Petrov, M. Eich, and G.A. Schneider: Facile Deposition of YSZ-Inverse Photonic Glass Films. ACS Appl. Mater. Interfaces 6, (2014).
(projects C2, C4, C5)
24.A. Roy, S. Kundu, K. Müller, A. Rosenauer, S. Singh, P. Pant, M.P. Gururajan, P. Kumar, J. Weissmüller, A. K. Singh, and N. Ravishankar: Wrinkling of Atomic Planes in Ultrathin Au Nanowires. Nano Lett. 14, 4859 (2014). (project B2)
23.Y. Xue, J. Markmann, H. Duan, J. Weißmüller, and P. Huber: Switchable imbibition in nanoporous gold. Nat. Commun. 5, 4237 (2014).
open access (projects B, B2) press release (German only)
22.P. Georgopanos, S. Rangou, T.G. Haenelt, C. Abetz, A. Meyer, V. Filiz, U.A. Handge, and V. Abetz: Analysis of glass transition and relaxation processes of low molecular weight polystyrene-b-polyisoprene diblock copolymers. Colloid and Polymer Science 292, 1877 (2014).
(project A2)
21.D. Kupka, N. Huber, and E. T. Lilleodden: A Combined exprimental-numerical approach for elasto-plastic fracture of individual gain boundaries. J. Mech. Phys. Solids 64, 455 (2014).
(project B4)
20.M. Raue, M. Wambach, S. Glöggler, D. Grefen, R. Kaufmann, C. Abetz, P. Geogopanos, U. A. Handge, T. Mang, B. Blümich, and V. Abetz: Investigation of Historical Hard Rubber Ornaments Charles Goodyear. Macromol. Chem. Phys. 215, 245 (2014).
(project A2)
19.U. Vainio, T. I. W. Schnoor, S. K. Vayalil, K. Schulte, M. Müller, and E. T. Lilleodden: Orientation Distribution of Vertically Aligned Multiwalled Carbon Nanotubes. J. Phys. Chem. C 118, 9507 (2014).
(projects B1, B4, Z2)
18.W. Heckel, B. A. M. Elsner, C. Schulz, and S. Müller: The Role of Hydrogen on the Adsorption Behavior of Carboxylic Acid on TiO2 Surfaces. J. Phys. Chem. C 118, 10771-10779 (2014).
(project A4)
17.S. Lang, M. Tschikin, S.-A. Biehs, A. Yu. Petrov, and M. Eich: Large penetration depth of near-field heat flux in hyperbolic media. Appl. Phys. Lett. 104, 121903 (2014).
(project C1)
16.N. Huber, R. N. Viswanath, N. Mameka, J. Markmann, and J. Weissmüller: Scaling laws of nanoporous metals under uniaxial compression. Acta Materialia 67, 252 (2014).
open access (projects B4, B2)
15.M. F. H. Wolff, V. Salikov, S. Antonyuk, S. Heinrich, and G. A. Schneider: Novel, Highly-filled ceramic-polymer composites synthesized by a spouted bed spray granulation process. Compos. Sci. Technol. 90, 154 (2014). open access (projects A3, A6)
14.R. Kubrin, J. J. do Rosario, H. Sing Lee, S. Mohanty, R. P. Subrahmanyam, I. Smirnova, A. Petrov, A. Yu. Petrov, M. Eich, and G. A. Schneider: Vertical Convective Coassembly of Refractory YSZ Inverse Opals from Crystalline Nanoparticles. ACS App. Mater. Interfaces 5, 13146 (2013).
(projects C2, C4, C5, C6)
13.J. M. Montero Moreno,  M. Waleczek, S. Martens, R. Zierold, D. Görlitz, V. Vega Martínez, V. M. Prida, and K. Nielsch: Constrained Order in Nanoporous Alumina with High Aspect Ratio: Smart Combination of Interference Lithography and Hard Anodization. Adv. Funct. Mater. 24, 1857 (2013). (project C3)
12.P. N. Dyachenko, A. Yu. Petrov, and M. Eich: Perfect narrow-band absorber based on a monolayer of metallodielectric microspheres. Appl. Phys. Lett. 103, 211105 (2013).
(projects C1, C2)
11.Z. Qi and J. Weissmüller: Hierarchical Nested-Network Nanostructure by Dealloying. ACS Nano 7, 5948 (2013).
(project B2)
10.M. F. H. Wolff, V. Salikov, S. Antonyuk, S. Heinrich, and G. A. Schneider: Three-dimensional discrete element modeling of micromechanical bending tests of ceramic–polymer composite materials. Powder Technol. 248, 77 (2013).
open access (projects A3, A6)
 9.I. Scheider, T. Xiao, N. Huber, and J. Mosler: On the interaction between different size effects in fibre reinforced PMMA: Towards composites with optimised fracture behaviour. Comp. Mat. Sci. 80, 35 (2013).
(project A5)
 8.Y.H.S. Lee Zheng, S. Meyne, A. Y. Petrov, and M. Eich: Waveguide based optical phased array. Photonics Technology Letters, IEEE 25, 1826 (2013). (project C2)
 7.H. S. Lee, R. Kubrin, R. Zierold, A. Yu. Petrov, K. Nielsch, G. A. Schneider, and M. Eich: Photonic properties of titania inverse opal heterostructures. Opt. Mater. Express 3, 1007 (2013).
open access (projects C2, C3, C4)
 6.K. Brandt, M. F. H. Wolff, V. Salikov, S. Heinrich, and G. A. Schneider: A novel method for a multi-level hierarchical composite with brick-and-mortar structure. Scientific Reports 3, 2322 (2013).
open access (projects A6, A3)
 5.S. Bargmann, I. Scheider, T. Xiao, E. Yilmaz, G. A. Schneider, and N. Huber:Towards bio-inspired engineering materials: Modeling and simulation of the mechanical behavior of hierarchical bovine dental structure. Computational Materials Science 79, 390 (2013).
(projects A6, B4, B6)
 4.S. Lang, H. S. Lee, A. Yu. Petrov, M. Störmer, M. Ritter, and M. Eich: Gold-silicon metamaterial with hyperbolic transition in near infrared. Appl. Phys. Lett. 103, 021905 (2013).
(projects C1, Z3)
 3.K. Brandt, C. Neusel, S. Behr, and G. A. Schneider: Dielectric behaviour and conductivity of high-filled BaTiO3-PMMA composites and the facile route of emulsion polymerization in synthesizing the same. J. Mater. Chem. C 1, 3129 (2013).
(project A6)
 2.N. Bleier and J. Mosler: A hybrid variationally consistent homogenization based approach on Ritz's method. Int. J. Numer. Meth. Engn. 94, 625 (2013).
(project A5)
 1.K. Wang and J. Weissmüller: Composites of Nanoporous Gold and Polymer. Adv. Mater. 25, 1280 (2013). open access (project B2)