|Title: Integration of value stream map and strategic layout planning into DMAIC approach to improve carpeting process.|
|Written by: Ayman Nagi and Safwan Altarazi|
|in: <em>Journal of industrial engineering and management</em>. (2017).|
|Volume: <strong>10</strong>. Number: (1),|
|on pages: 74--97|
Abstract: This paper presents an implementation of the Six Sigma DMAIC approach implementing lean tools and facilities layout techniques to reduce the occurrence of different types of nonconformities in the carpeting process. Such carpeting process can be found in several industries including construction, aviation, and automotive. Design/methodology/approach: The improvement process was built through a sequential implementation of appropriate interconnected tools at each phase of the DMAIC approach. Utilized tools included: Pareto analysis, control charts, Ishikawa chart, 5-Whys, failure mode and effect analysis, process capability ratio, value stream map, and strategic layout planning. Findings: The carpeting process capability, quality of the product, customer satisfaction, and cost of poor quality were significantly improved. Explicitly, the sigma level was improved from 2.297 to 2.886 and the defects per million opportunities was reduced from 21615 to 3905. Originality/value: This paper has demonstrated the coherent implementation of several quality tools, value stream map, and systematic layout planning within the DMAIC approach.