Monthly Meetings
At the monthly meetings, which take place every third Tuesday of the month from 9 a.m. to 3 p.m., one Ph.D. candidate at a time presents his or her Ph.D. project in a seminar talk. Technical basics relevant for the understanding of the seminar talk are acquired together in a group of 3-4 with the help of a worksheet. From time to time, the monthly meetings are supplemented by additional units, e.g. a seminar on management.
Appointments
April 2024
Sugar-Based Vinylogous Urethane Vitrimers: from Elastomeric to Thermosetting Materials - A2 (Gloria Signorato)
February 2024
A Position-Sensitive Detector for a Pinpoint Heat Spot - C8 (Jun Peng)
January 2024
Scaling between elasticity and topological genus for random network nanomaterials - B8 (Seoyun Sohn)
December 2023
Multiscale Modelling of Oleate Grafted Magnetite Supercrystals - A8 (Emre Gürsoy)
Novmeber 2023
Crosslinking of Superparamagnetic Iron Oxide Nanoparticles via Diels-Alder Reactions - A1 (Lea Klauke)
October 2023
Vitrimers in Combination with Self-Assembling Block Copolymers - A2 (Siraphat Weerathaworn)
September 2023
Structural characterization of hierarchical nanoporous gold - B2 (Lukas Riedel)
June 2023
Growth and epitaxy studies of magnetite nanoparticles using grazing incident X-ray diffraction - A7 (Mohammad Tehrani)
May 2023
Modelling Yield Surfaces in Multiaxial Stress Space using Machine Learning - B4 (Lena Dyckhoff)
April 2023
Stimuli-Responsive Thermoreversible Polymer Networks Based on Dynamic Covalent Chemistry for Nanocomposite Core-Shell Systems - A2 (Florian Klein)
March 2023
Effective Medium Models to Describe the Optical Properties of Dielectric Membranes with Cylindrical Pores - C2 (Julia Brandt)
February 2023
A Brief Introduction to Engineering Education Research at TUHH - MGK (Prof. Christian Kautz)
January 2023
Atomistic Modeling of Surface Effects in Nanoporous Gold at Constant Potential - B10 (Ludwig Ahrens-Iwers)
December 2022
Synthesis, Surface Modification and Self-Assembly of Titania Nanoplates - A1 (Jana Struck)
November 2022
Surface modification of nanoporous metals - B10 (Olga Matts)
October 2022
Photonic materials for high-temperature applications by tailored phase formation - C4 (Alberto Gomez-Gomez)
September 2022
Tailor-made radial anisotropic nanostructures for photonic applications - C8 (Carina Hedrich)
May 2022
Semantic segmentation and machine learning - B9 (Trushal Sardhara)
April 2022
Multiscale photonic materials with tunable absorption - C1 (Maurice Pfeiffer)
March 2022
Determination of time dependent material parameters of supercrystalline nanocomposites - A5 (Vasu Kolli)
February 2022
Self-Assembly of Iron Oxide Nanocubes into Three-Dimensional Clusters and Their Encapsulation - A1 (Lea Klauke)
January 2022
3D nanotomography of hierarchical nanoporous gold by using dual beam FIB-SEM - B9 (Alexander Shkurmanov)
December 2021
Charge ordering in Magnetite - A8 (Emre Gürsoy)
November 2021
Tailor-made inverse opal photonic crystals based on metal-insulator transition materials - C8 (Jun Peng)
October 2021
Vitrimers in Combination with Self-Assembly Block Copolymers A2 (Siraphat Weerathaworn)
June 2021
Constant potential simulations of nanoporous gold electrodes - A8 (Ludwig Ahrens-Iwers)
May 2021
Scattering at multiscale photonic materials with radial anisotropy - C2 (Julia Brandt)
April 2021
Spray Drying for the Production of Composites - A3 (Sophia Rothberg)
March 2021
From particle accelerators to modern synchrotron radiation experiments - Z2 (Hergen Stieglitz und Silja Flenner)
February 2021
Harder, Better, Tougher, Stronger - A6 (Alexander Plunkett)
December 2020
Bulk supercrystalline ceramic-organic nanocomposites - A6 (Büsra Bor)
November 2020
Laser-Excited Elastic Guided Waves- B7 (Manuel Brinker)
October 2020
Performance of Supercapacitors - A8 (Jannes Seebeck)
September 2020
Additive manufacturing with colloidal self-assembly - A6/C4 (Benedikt Winhard)
June 2020
Electron tomography - Z3 (Tobias Krekeler)
May 2020
Supercrystalline nanocomposites - A2 (Diletta Giuntini)
April 2020
Vinylogous urethane vitrimers - A2 (Philipp Haida)
January 2020
Diels-Alder reaction - A2 (Merlina Thiessen)
December 2019
Multi-scale simulation of hierarchical materials - A4 (Kai Sellschopp)
November 2019
Synchrotron based nuclear methods - A7 (Steffen Tober)
October 2019
Spouted bed granulation - A3 (Sophia Rothberg)
September 2019
High temperature stability of metamaterial thin films - C7 (Gnanavel Vaidhyanathan)
May 2019
Phase constrast nanotomography - Z2 (Silja Flenner)
April 2019
Hierarchical, multifunctional ceramic-polymer materials systems - A6 (Alexander Plunkett)
March 2019
Micromechanics of nanoporous gold composites - B4 (Murilo Pereira Hablitzel)
February 2019
Modeling of nanoporous gold - B4 (Claudia Richert)
January 2019
NMR-spectroscopy and organic synthesis - A1 (Michael Kampferbeck)
December 2018
Nanocomposites and bulge experiments - A1 (Clemens Schröter)
November 2018
X-ray data analysis and grain mapping - Z2 (Hergen Stieglitz)
October 2018
Nanomechanical characterization of nanocomposites - A6 (Büsra Bor)
September 2018
micromechanical-electrochemical coupling of nanostructured material - B8 (Yijuan Wu)
June 2018
Introduction to engineering education research at TUHH - MGK (Christian Kautz)
May 2018
DEM simulations of sintering in marco porous structures - A3 (Christoph Ohmstede)
April 2018
Scattering techniques using photons and neutrons - Z2 (Dr. Malte Blankenburg)
March 2018
Optical properties and fabrication of photonic glasses for structural colors - C4 (Yen Nguyen)
February 2018
Polypyrrol in porous silicon - B7 (Manuel Brinker)
January 2018
Adsorption of organic molecules on magnetite single crystal surfaces - A7 (Marcus Creutzburg)
December 2017
Predicting TiO2 particle shapes from ab-initio calculations - A4 (Kai Sellschopp)
November 2017
Structure evolution during sintering of highly porous structures - C5 (Dr. Kaline Furlan)
October 2017
Planar polypyrrole/silicon hybrid material systems - B7 (Pirmin Lakner)
September 2017
Thermal stability of ceramic microparticles - C6 (Gregor T. Dahl)
June 2017
Modification of styrene-butadiene copolymers - A2 - (Elisabeth Wittenberg)
May 2017
Synchrotron tomographic imaging - Z2 (Dr. Emanuel Larsson, Dr. Imke Greving)
April 2017
Microanalysis in electon microscopy - Z3 (Dr. Tobias Krekeler)
March 2017
Oscillatory rheology of polymer melts - A2 (Elaine Rahmstorf)
Theory and Practice of Interdisciplinarity (Dr. Michael Liegl)
February 2017
Surface X-ray diffraction on magnetite (001) - A7 (Björn Arndt)
January 2017
Material modeling and simulation - B6 (Edgar Husser)
December 2016
Kick-off Event 2016
November 2016
Thermal radiation - C1 (Slawa Lang)
October 2016
Preparation and optical properties of core-shell microparticles - C6 (Maik Finsel)
September 2016
Characterization of mechanical metamaterials based on inverse opals - ABC/C4 (Jefferson Jean do Rosário)
May 2016
Micromechanical Characterization of Hierarchical Materials - B4 - (Kaixiong Hu)
April 2016
In-situ STM Imaging of Nanostructure Formation - B2 (Anastasia Straßer)
March 2016
Modeling using systems of differential equations - João Gustavo Pereira da Silva
Management-Seminar (Prof. Norbert Huber)
February 2016
Principles and Applications of X-ray Imaging - Z2 (Malte Ogurreck)
January 2016
IR Spectroscopy As a Tool for Qualitative Analysis - A2 (Elisabeth Wittenberg)
December 2015
Development of Hard Coatings for Porous Ceramics - Diego Blaese
November 2015
Synthesis and Characterization of Supramolecular Polymers to Form 3D-networks - A2 (Elaine Rahmstorf)
October 2015
Preparation and Characterization of Thin Films - A1 (Andreas Hensel)
September 2015
Principles and Application of Electron Microscopy - Z3 (Tobias Krekeler)
June 2015
Bulk-sized Composites Inspired by Nacre - A6 (Sebastian Behr)
May 2015
Workshop by Z2 on Imaging at DESY (Deutsches Elektronen-Synchrotron)
April 2015
Hyperbolic Metamaterials - C1 (Slawa Lang)
Organization Seminar (Prof. Norbert Huber)
March 2015
Synthesis and Magnetism of Iron Oxide Particles - A1 (Artur Feld)
February 2015
Synthesis and Characterization of Zirconia Microparticles - C6 (Elisabeth W. Leib)
January 2015
Spouted Bed Granulation - A3 (Eduard Eichner)
December 2014
Ab-initio Studies on TiO2 - A4 (Wolfgang Heckel)
November 2014
Lithographically Guided Coatings and ALD Coatings - C3 (Martin Waleczek)
October 2014
Synthesis, Modification and Characterization of Low Molecular Weight Polymers - A2 (Prokopios Georgopanos)
September 2014
Nanoporous Gold as Sensor Material - B2 (Charlotte Stenner)
June 2014
Sintering Simulation of Materials (Robert Besler)
Visit at DESY (Deutsches Elektronen Synchrotron)
May 2014
Fabrication of Inverse Opals - C4 (Jefferson Jean do Rosàrio)
April 2014
3-D Microstructural Characterization of Composites - B4 (Kaixiong Hu)
March 2014
Fiber-reinforced ceramic composites - C5 (Paula Guglielmi)
Februar 2014
Simulations using Density Functional Theory - B3 (Beatrix Elsner)
January 2014
Polymer-infiltrated Nanoporous Gold - B2 (Ke Wang)
December 2013
Preparation of Core-shell-core Particles - C6 (Alexey Petrov)
October 2013
Synthesis, Characterization and Surface Modification of Nanoparticles - A1 (Andreas Hensel)
September 2013
Synchrotron-X-ray Scattering - Z2 (Ulla Vainio)
X-ray Tomography and X-ray Microscopy - Z2 (Malte Ogurreck)
Modeling Material Failure - A5 (Guillermo Díaz)
Management-Seminar (Prof. Norbert Huber)
June 2013
Highly filled Ceramic-polymer-composites - A6 (Kristina Brandt)
Management-Seminar (Prof. Norbert Huber)
April 2013
Hierarchical Nanoporous Gold - B2 (Zhen Qi)
March 2013
Alignment of Planar Particles - A6 (Sebastian Behr)
Management-Seminar (Prof. Norbert Huber)
February 2013
Spouted Bed Granulation - A3 (Michael Wolff)