RSS-Feed

Johanna Spallek, M.Sc.

Johanna Spallek, M.Sc.

Adresse
Technische Universität Hamburg
Produktentwicklung und Konstruktionstechnik
Denickestraße 17 (L)
21073 Hamburg
Büro
Gebäude L
Raum 1.015
Telefon
Tel: +49 40 42878 2148
E-Mail
j.spallek(at)tuhh.de
Sprechzeiten
nach Vereinbarung

Projekte

  • ALSTER - Aneurysm Like Synthetic bodies for Testing Endovascular devices in Reality
  • ELBE-NTM - Development and Evaluation of a Patient-Based Neurointerventional Training Model

 

Veröffentlichungen und Vorträge

  • Spallek, J., Kuhl, J., Wortmann, N., Buhk, J.-H., Frölich, A.M., Nawka, M.T., Kyselyova, A., Fiehler, J., Krause, D. (2019): Design for Mass Adaptation of the Neurointerventional Training Model HANNES with Patient-Specific Aneurysm Models, in Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5-8 August 2019. DOI:10.1017/dsi.2019.94
  • Nawka MT, Spallek J, Kuhl J, Krause D, Buhj JH, Fiehler J, Frölich A: Evaluation of a modular in vitro neurovascular procedure simulation for intracranial aneurysm embolization.
  • Spallek, J.; Kuhl, J.; Nawka, M. T. ; Frölich, A.; Buhk, J.; Fiehler, J. ; Krause, D. : Patient-specific, additively manufactured vascular models enabling an animal-free neurointerventional training setup. Linz 2018 - EUSAAT 2018, Volume 7, No. 2, ISSN 2194-0479, S.219; Society ALTEX Edition, Kuesnacht, Switzerland, 21st European Congresson Alternatives to Animal Testing, September 23-26, 2018.
  • Wegner, M.; Wortmann, N.; Spallek, J.; Krause, D.; Gargioni, E.: Development of an additive manufactured mouse phantom for quality assurance of a small animal irradiation device. Linz 2018 - EUSAAT 2018, Volume 7, No. 2, ISSN 2194-0479, S.247; Society ALTEX Edition, Kuesnacht, Switzerland, 21st European Congresson Alternatives to Animal Testing, September 23-26, 2018.
  • Nawka, M.T.; Fiehler, J.; Spallek, J.; Buhk, J.-H.; Frölich, A.M.: Current status of training environments in neuro-interventional practice: are animal models still contemporary?
    2018 Jul 26. doi: 10.1136/neurintsurg-2018-014036. [Epub ahead of print]
  • Krause, D.; Spallek, J.; Blees, C.; Kipp, T.: Modulare Produktstrukturierung. In: Rieg, F.; Steinhilper, R. (Hrsg.): Handbuch Konstruktion. ISBN 978-3-446-45224-4, Carl Hanser Verlag, München, 2. Auflage, 2018, S. 719-741.
  • Spallek, Johanna; Frölich, Andreas; Nawka, Marie Teresa; Buhk, Jan-Hendrik; Fiehler, Jens; Krause, Dieter: Hollow Vascular Models of Intracranial Aneurysms for Neurointerventional Treatment Training. 3rd International Conference on 3D Printing in Medicine, Mainz, May 4-5 2018.
  • Wegner, M.; Spallek, J.; Kaul, M.; Mittag, M.; Gargioni, E.: Development of a tissue-equivalent phantom for multimodal imaging of the prostate. BMTMedPhys 2017 – Dresden, September 10–13 DOI 10.1515/bmt-2017-5045 Biomed. Eng.-Biomed. Tech. 2017; 62(s1): S246
  • Spallek, J.; Krause, D.: Decision-Making in Additive Manufacturing - Survey on AM Experience and Expertise of Designers Springer International Publishing AG 2018; M. Meboldt and C. Klahn (eds.), Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017, pages 347-360; DOI 10.1007/978-3-319-66866-6_33
  • Spallek, J.; Krause, D.: Entwicklung individualisierter Produkte durch den Einsatz Additiver Fertigung. In: Lachmayer, R.; Lippert, R. B. (Hrsg.): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der Technik, Springer Vieweg Verlag, Berlin Heidelberg, ISBN: 978-3-662-54112-8 (2017), pp. 69-83, DOI:10.1007/978-3-662-54113-5_5
  • Sedlacik, J; Frölich, A.; Spallek, J.; Forkert, N; Werner, F.; Knopp, T.; Krause, D.; Fiehler, J.; Buhk, J.-H.: Detection of flow dynamic changes in 3D printed aneurysm models after treatment. 7th International Workshop on Magnetic Particle Imaging (IWMPI) 2017.
  • Spallek J.; Krause, D.: Process Types of Customisation and Personalisation in Design for Additive Manufacturing Applied to Vascular Models, Procedia CIRP Volume 50, 2016, Pages 281–286, 26th CIRP Design Conference.
  • Sedlacik J, Frölich A, Spallek J, Forkert ND, Faizy TD, Werner F, et al. (2016) Magnetic Particle Imaging for High Temporal Resolution Assessment of Aneurysm Hemodynamics. PLoS ONE 11(8): e0160097. doi:10.1371/journal.pone.0160097
  • Spallek, J.; Sankowski, O.; Krause, D.: Influences of Additive Manufacturing on Design Processes for Customised Products. 14th International Design Conference - DESIGN 2016, Cavtat, Dubrovnik, Croatia (2016), pp. 513 - 522.
    Paper was rated to the top 5% papers based on reviewers' scores. Recognition of the outstanding contribution
  • Sedlacik, J; Frölich, A.; Spallek, J.; Forkert, N; Faizy, T.; Werner, F.; Knopp, T.; Krause, D.; Fiehler, J.; Buhk, J.: Flow dynamics in a 3D printed brain aneurysm model assessed by magnetic particle imaging, magnetic resonance imaging and dynamic subtraction angiography. International Society for Magnetic Resonance in Medicine 2016 Annual Meeting
  • Sedlacik, J; Frölich, A.; Spallek, J.; Forkert, N; Faizy, T.; Werner, F.; Knopp, T.; Krause, D.; Fiehler, J.; Buhk, J.: Flow dynamics in a 3D printed aneurysm model assessed by magnetic par-ticle imaging. International Workshop on Magnetic Particle Imaging (IWMPI) 2016
  • Spallek, Johanna; Frölich, Andreas; Buhk, Jan-Hendrik; Fiehler, Jens; Krause, Dieter: Comparing Technologies of Additive Manufacturing for the Development of Vascular Models. Fraunhofer Direct Digital Manufacturing Conference, Berlin, 2016. ISBN 978-3-8396-1001-5
  • Frölich, A.M.J.; Spallek J.; Brehmer, L.; Buhk, J.-H.; Krause, D.; Fiehler, J.; Kemmling, A.: 3D Printing of Intracranial Aneurysms Using Fused Deposition Modeling Offers Highly Accurate Replications. AJNR American Journal of Neuroradiology, originally published online on August 20, 2015. DOI: 10.3174/ajnr.A4486
  • Spallek, J.; Frölich, A.; Fiehler, J.; Krause, D.: ALSTER – Aneurysm Like Synthetic bodies for Testing Endovascular devices in 3D Reality. Vortrag beim 3. fmthh- Symposium, 18. November 2015, Technische Universität Hamburg-Harburg.
  • Krause, D., Spallek, J.: 3D-Druck in der Medizin: Einführung und Anwendungsmöglichkeiten am Beispiel der Entwicklung von Aneurysmamodellen, 96. Deutscher Röntgenkongress, Hamburg (2015), RöFo - Fortschritte auf dem Gebiet der Röntgenstrahlen, 04/2015; 187(S 01). DOI: 10.1055/s-0035-1550811
  • Spallek, J.; Krause, D.: ALSTER – Aneurysm Like Synthetic bodies for Testing Endovascular devices in 3D Reality. Vortrag beim 2. fmthh- Symposium, 17. November 2014, Universitätsklinikum Hamburg-Eppendorf. 
  • Spallek, J.; Brehmer, L.; Frölich, A.; Kemmling, A.; Fiehler, J.; Krause, D.: Entwicklung generativ gefertigter und individualisierbarer Gefäßmodelle, Design for X, Beiträge zum 25. DfX-Symposium, Bamberg (2014), pp. 1-12.
  • Brehmer, L.; Frölich, A. M.; Buhk, J.; Spallek, J.; Krause, D.; Fiehler, J.; Kemmling, A.: 3D printing of intracranial aneurysms using Fused Deposition Modeling offers a high level of accuracy, 49. Jahrestagung der Deutschen Gesellschaft für Neuroradiologie, Köln, 23.-25. Oktober 2014.
  • Spallek, J.; Krause, D.: ALSTER – Aneurysm Like Synthetic bodies for Testing Endovascular devices in 3D Reality. Vortrag beim 1. fmthh- Symposium, 20. Februar 2014, TU Hamburg-Harburg.