2025
-
Enhancing swelling kinetics of pNIPAM lyogels: The role of crosslinking, copolymerization, and solvent
Fluid Phase Equilibria 597: 114462 (2025)
Open Access | Verlags DOI -
Influence of the position of fibre misalignment in glass fibre-reinforced polymers on mechanical properties, damage behaviour and traceability via non-destructive tests
Composites Part C Open Access 18: 100633 (2025)
Open Access | Verlags DOI -
Integration of the all-in-one electrode in an electrochemical flow cell for in situ hydrogen peroxide supply in hydroxylation mediated by immobilized unspecific peroxygenase
Electrochemistry Communications 177: 107949 (2025)
Open Access | Verlags DOI -
A review on aging effects of thermoset prepregs
Composites Part B: Engineering 303: 112611 (2025)
Open Access | Verlags DOI -
New method for crack length determination in low-temperature DCB tests based on electrical capacitance
Engineering Fracture Mechanics 319: 111012 (2025)
Open Access | Verlags DOI -
Load‐Induced Shear Band Formation in Microscale Epoxy Materials
Journal of polymer science 63 (10): 2174-2186 (2025)
Open Access | Verlags DOI -
Performing Polarized Raman and Digital Image Correlation Analysis to Understand the Increased Ductility of Microscale Epoxy Materials
Journal of polymer science 63 (9): 2091-2101 (2025)
Open Access | Verlags DOI -
Lifetime prediction of high-performance fibre-reinforced polymer composites using Vibro-acoustic Modulation
Technisch-Wissenschaftliche Schriftenreihe / TUHH Polymer Composites 48: (2025)
Open Access -
Molecular mechanisms of macroscopic ductility within brittle epoxy resins
Technisch-Wissenschaftliche Schriftreihe 49: (2025)
Open Access
2024
-
Numerical analysis of the effects of pores on propagating guided waves
International Journal of Solids and Structures 301: 112940 (2024)
Verlags DOI -
Comprehensive evaluation of CFRP laminates using NDT methods for aircraft applications
Journal of Materials Research and Technology 32: 395-409 (2024)
Open Access | Verlags DOI -
Numerical investigation of the bearing performance of Thin- and Thick-Ply hybrid laminates
Composite Structures 345: 118372 (2024)
Verlags DOI -
New insights into the inhibition mechanism of carboxylate species on magnesium surface
Corrosion Science 232: 112009 (2024)
Verlags DOI -
Using thermokinetic methods to enhance properties of epoxy resins with amino acids as biobased curing agents by achieving full crosslinking
Scientific Reports 14 (1): 4367 (2024)
Open Access | Verlags DOI -
Environmental effects on composites durability with regard to fibers, matrix, and interphase
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 46: (2024)
Open Access -
In-line monitoring of three-roll mill dispersion processes for functional carbon nanocomposites
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 45: (2024)
Open Access
2023
-
Electrochemical H₂O₂ - stat mode as reaction concept to improve the process performance of an unspecific peroxygenase
New Biotechnology 78: 95-104 (2023-12-25)
Open Access | Verlags DOI -
Predicting corrosion inhibition efficiencies of small organic molecules using data-driven techniques
npj Materials Degradation 7 (1): 64 (2023-12-01)
Open Access | Verlags DOI -
Reconstructing the infrared spectrum of a peptide from representative conformers of the full canonical ensemble
Communications Chemistry 6 (1): 46 (2023-12)
Open Access | Verlags DOI -
On the use of machine learning and genetic algorithm to predict the region processed by laser peen forming
Manufacturing Letters 38: 60-64 (2023-11-01)
Open Access | Verlags DOI -
Vibro-acoustic modulation based measurements in CFRP laminates for damage detection in Open-Hole structures
Composites Communications 42: 101659 (2023-10)
Verlags DOI -
Investigation of the ductile deformation potential of microscale epoxy materials
Polymer testing 128: 108217 (2023-09)
Open Access | Verlags DOI -
Reversible and irreversible effects on the epoxy GFRP fiber-matrix interphase due to hydrothermal aging
Composites Part C: Open Access 12: 100395 (2023)
Open Access | Verlags DOI -
Application of the all-in-one electrode for in situ H2O2 generation in hydroxylation catalyzed by unspecific peroxygenase from Agrocybe aegerita
Molecular Catalysis 547: 113325 (2023-08)
Verlags DOI -
Effect of fiber misalignment and environmental temperature on the compressive behavior of fiber composites
Polymers 15 (13): 2833 (2023)
Open Access | Verlags DOI -
Synthetic generation of vibroacoustic modulation signals for structural health monitoring
Mechanical systems and signal processing 200: 110498 (2023)
Open Access | Verlags DOI -
Durability of plant fiber composites for structural application: A brief review
Materials 16 (11): 3962 (2023-05-25)
Open Access | Verlags DOI -
Influence of sizing aging on the strength and fatigue life of composites using a new test method and tailored fiber pre-treatment : a comprehensive analysis
Journal of Composites Science 7 (4): 139 (2023)
Open Access | Verlags DOI -
Herausforderungen dickwandiger, duroplastischer Faser-Kunststoff-Verbunde in der Herstellung sowie mechanischen und zerstörungsfreien Prüfung - Ein Review
Zeitschrift Kunststofftechnik 19 (2): 73–117 (2023)
Verlags DOI -
Health monitoring of CFRP laminates under cyclic loading via vibro-acoustic modulation based measurements
Composite Structures 308: 116696 (2023-03-15)
Verlags DOI -
Time, temperature and water aging failure envelope of thermoset polymers
Polymer Testing 118: 107901 (2023-01-15)
Open Access | Verlags DOI -
Simulation of the progressive failure of CFRP at elevated temperature
In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
-
Additive manufacturing of structural and functional materials
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 44: (2023)
Open Access -
Bearing strength high performance fibre metal thin-ply laminates
ICCM International Conferences on Composite Materials (ICCM 2023)
-
Effects of wet aging on the damage progress in multidirectional GFRP composites under fatigue loading
In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
-
Minimizing mechanical anisotropy in fused filament fabrication through innovative thermoset materials and additive manufacturing processes
International SAMPE Technical Conference (2023)
Verlags DOI -
Novel manufacturing process for natural fibre composites out of biobased and biodegradable materials
In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
-
Numerical simulation of the bearing failure mechanism of thin-ply metal laminates
In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
-
Thermoset state estimation using infrared spectroscopy and predictive analytics
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 43: (2023)
Open Access -
Vibro-acoustic modulation measurements for a lifetime evaluation of composite materials
In: Brian Falzon, Conor McCarthy (Eds.): ICCM23: proceedings of the 2023 International Conference on Composite Materials (2023)
2022
-
Innovative thermoset materials and additive manufacturing processes to minimise
Sampe Europe 978-1-7138-6650-3 1: 88-95 (2024)
-
Adsorption of oleic acid on magnetite facets
Communications Chemistry 5 (1): 134 (2022-12-01)
Open Access | Verlags DOI -
Failure prediction and surface characterization of GFRP laminates : a study of stepwise loading
Polymers 14 (20): 4322 (2022)
Open Access | Verlags DOI -
Workshop GRK 2462 "Processes in Natural and Technical Particle-Fluid-Systems" (PintPFS) : 26th & 27th of September 2022, Hamburg, Germany : conference proceedings
Technische Universität Hamburg (2022)
Open Access -
Data-driven selection of electrolyte additives for aqueous magnesium batteries
Journal of Materials Chemistry A 10 (40): 21672-21682 (2022-09-23)
Verlags DOI -
ELECTRODE: an electrochemistry package for atomistic simulations
Journal of Chemical Physics 157 (8): 084801 (2022)
Open Access | Verlags DOI -
Experimental characterization and mechanical behavior of 3D printed CFRP
European Journal of Mechanics, A/Solids 94: 104587 (2022-07-01)
Verlags DOI -
Solid epoxy for functional 3D printing with isotropic mechanical properties by material extrusion
Additive Manufacturing 55: 102797 (2022-07)
Verlags DOI -
Bearing strength high performance fibre metal thin-ply laminates
20th European Conference on Composite Materials (ECCM 2022)
Open Access | Verlags DOI -
Effects of the hygrothermal aging history on epoxy resins and GFRP composites
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability 6: 347-354 (2022)
Open Access | Verlags DOI -
Fully-integrated carbon nanotube epoxy film sensors for strain sensing in GFRP
ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability 6: 216-223 (2022)
Open Access -
Weak bond detection in single-lap shear bonds by evaluating vibroacoustic modulations with artificial neural networks
20th European Conference on Composite Materials (ECCM 2022) 3: 509-516 (2022)
Open Access -
General influence of the environmental temperature on the matrix strength under tensile and compressive loading - A comprehensive study on high performance matrices
Composites Science and Technology 230 (Part 2): 109486 (2022)
Verlags DOI -
Atomistic insight into the hydration states of layered double hydroxides
ACS Omega 7 (14): 12412-12423 (2022-04-12)
Open Access | Verlags DOI -
Hygrothermal aging history of amine-epoxy resins: effects on thermo-mechanical properties
Frontiers in Materials 9: (2022-03-02)
Open Access | Verlags DOI -
Active Corrosion Protection Surfaces Based on Layered Double Hydroxides Nanocontainers: A Computational Study
Magnesium Technology Symposium held at the TMS Annual Meeting and Exhibition (2022)
Verlags DOI -
Elucidating curvature-capacitance relationships in carbon-based supercapacitors
Physical Review Letters 128 (8): 086001 (2022)
Open Access | Verlags DOI -
Impact of confinement and polarizability on dynamics of ionic liquids
Journal of Chemical Physics 156 (6): 064703 (2022-02-14)
Open Access | Verlags DOI -
Impact damage detection in glass fibre reinforced polymers via electrical capacitance measurements on integrated carbon fibre bundles
Composites Communications 30: 101090 (2022-02)
Verlags DOI -
Influence of moisture absorption on the mechanical properties of unidirectional flax fibre composites
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica 39 (2): 608-616 (2022-02)
Verlags DOI -
Fragmentation of beaded fibres in a composite
Materials 15 (3): 890 (2022)
Open Access | Verlags DOI -
How water wets and self-hydrophilizes nanopatterns of physisorbed hydrocarbons
Journal of Colloid and Interface Science 606 (1): 57-66 (2022-01-15)
Verlags DOI -
Probabilistic analysis of additively manufactured polymer lattice structures
Materials & Design 213: 110300 (2022-01)
Open Access | Verlags DOI -
Damage tolerance of high-performance composites
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 41: (2022)
Open Access -
Structurally compatible embedded sensors for damage detection in glass fibre reinforced polymers
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 42: (2022)
Open Access
2021
-
Predicting the inhibition efficiencies of magnesium dissolution modulators using sparse machine learning models
npj Computational Materials 7 (1): 193 (2021-12)
Open Access | Verlags DOI -
Strain sensing in GFRP via fully integrated carbon nanotube epoxy film sensors
Composites Part C: Open Access 6 : 100191 (2021-10)
Open Access | Verlags DOI -
Superior CNT-supported bimetallic RuCu catalyst for the highly selective hydrogenolysis of glycerol to 1,2-propanediol
Catalysis Science and Technology 11 (20): 6649-6653 (2021-10-21)
Open Access | Verlags DOI -
A screen-printing method for manufacturing of current collectors for structural batteries
Multifunctional Materials 4 (3): 035002 (2021-09)
Open Access | Verlags DOI -
Constant potential simulations on a mesh
Journal of Chemical Physics 155 (10): 104104 (2021-09-14)
Open Access | Verlags DOI -
Nanoarchitectonics at surfaces using multifunctional initiators of surface-initiated radical polymerization for fabrication of the nanocomposites
Applied Surface Science Advances 5: 100104 (2021-09-01)
Open Access | Verlags DOI -
Modelling of low-velocity impact and compression after impact of CFRP at elevated temperatures
Composites Part A: Applied Science and Manufacturing 147: 106418 (2021-08)
Verlags DOI -
Herstellung von Prepregs für ein Faserverbundbauteil
Deutsches Patent- und Markenamt (2021)
Open Access -
Damage tolerance and notch sensitivity of bio-inspired thin-ply Bouligand structures
Composites Part C: Open Access 5 : 100146 (2021-07)
Open Access | Verlags DOI -
Fatigue and fatigue after impact behaviour of Thin- and Thick-Ply composites observed by computed tomography
Composites Part C: Open Access 5: 100139 (2021-07)
Open Access | Verlags DOI -
Damage tolerance of few-layer graphene modified CFRP: From thin-to thick-ply laminates
Composites Science and Technology 209: 108765 (2021-06-16)
Verlags DOI -
Weak adhesion detection – enhancing the analysis of vibroacoustic modulation by machine learning
Composite Structures 273: 114233 (2021-10-01)
Open Access | Verlags DOI -
Multi-physics modeling of the ignition of polymer matrix composites (PMCs) exposed to fire
Fire Safety Journal 122: 103312 (2021-06)
Verlags DOI -
Smart dispersion of carbon nanoparticle epoxy composites: from nano to application
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 39: (2021)
Open Access -
Mechanical degradation estimation of thermosets by peak shift assessment: General approach using infrared spectroscopy
Polymer 221: 123585 (2021-04-14)
Verlags DOI -
Mechanical properties and failure mode of thin-ply fiber metal laminates under out-of-plane loading
Composites Part A: Applied Science and Manufacturing 143: 106267 (2021-04)
Verlags DOI -
Steel foil reinforcement for high performance bearing strength in Thin‐Ply composites
Composites Part C: Open Access 4: 100085 (2021-03)
Open Access | Verlags DOI -
Modeling charge redistribution at magnetite interfaces in empirical force fields
Journal of Physical Chemistry C 125 (8): 4794-4805 (2021-03-04)
Open Access | Verlags DOI -
Exploring key ionic interactions for magnesium degradation in simulated body fluid – a data-driven approach
Corrosion Science 182: 109272 (2021-04-15)
Open Access | Verlags DOI -
Capacitance measurements on integrated conductors for detection of matrix cracks in GFRP
Functional Composite Materials 2 (1): art. no. 2(2021) (2021)
Open Access | Verlags DOI -
Exploring structure-property relationships in magnesium dissolution modulators
npj Materials Degradation 5 (1): 2 (2021-12-01)
Open Access | Verlags DOI -
Experimental and numerical mechanical characterization of additively manufactured Ti6Al4V lattice structures considering progressive damage
International Journal of Mechanical Sciences (189): 105986 (2021-01-01)
Verlags DOI -
Durability of high-performance Thin-Ply composites
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 40: (2021)
Open Access
2020
-
Aerographite phonon density of states affects double resonant Raman scattering
Journal of Applied Physics 19 (128): 195101 (2020-11-21)
Verlags DOI -
Impact of temperature on LVI-damage and tensile and compressive residual strength of CFRP
Composites Part C: Open Access 3: 100074 (2020)
Open Access | Verlags DOI -
Molecular simulation of thermosetting polymer hardening: reactive events enabled by controlled topology transfer
Macromolecules 22 (53): 9698-9705 (2020-11-06)
Verlags DOI -
Nanocarbon Aerogels and Aerographite
in Synthesis and Applications of Nanocarbons, John Wiley & Sons Ltd: 247-274 (2020-10-26)
Verlags DOI -
The influence of different glass fiber/epoxy matrix combinations on the durability under severe moisture impact
IOP Conference Series: Materials Science and Engineering 1 (942): 012009 (2020-10-23)
Open Access | Verlags DOI -
Strength of scarf-bonded CFRP repairs containing disc-shaped zones of weak bonding considering hot-wet conditioning
International Journal of Adhesion and Adhesives (102): 102643 (2020-10)
Verlags DOI -
ATR-FTIR in Kretschmann configuration integrated with electrochemical cell as in situ interfacial sensitive tool to study corrosion inhibitors for magnesium substrates
Electrochimica Acta (345): 136166 (2020)
Open Access | Verlags DOI -
Nanocomposites with p- and n-type conductivity controlled by type and content of nanotubes in thermosets for thermoelectric applications
Nanomaterials 10 (6): 1144 (2020)
Open Access | Verlags DOI -
Smart reactors – Combining stimuli-responsive hydrogels and 3D printing
Chemical Engineering Journal (387): 123413 (2020-05-01)
Verlags DOI -
Tensile creep behaviour of unidirectional flax fibre reinforced bio-based epoxy composites
Composites Communications (18): 5-12 (2020-04)
Verlags DOI -
Conversionless efficient and broadband laser light diffusers for high brightness illumination applications
Nature Communications 1 (11): 1437 (2020)
Open Access | Verlags DOI -
Electrical double layer capacitance of curved graphite electrodes
Journal of Physical Chemistry C 10 (124): 5515-5521 (2020-03-03)
Open Access | Verlags DOI -
CFRP thin-ply fibre metal laminates : influences of ply thickness and metal layers on open hole tension and compression properties
Materials 13 (4): 910 (2020)
Open Access | Verlags DOI -
In silico screening of modulators of magnesium dissolution
Corrosion Science (163): 108245 (2020-02-01)
Open Access | Verlags DOI -
Mechanical integrity of friction-riveted joints for aircraft applications
Composite Structures (232): 111542 (2020-01-15)
Verlags DOI -
A new additive manufacturing technique for layered metal-composite hybrid structures
Technische Universität Hamburg (2020)
Open Access -
Control of biosynthesis in bioelectrochemical systems
Chemie Ingenieur Technik 9 (92): 1212-1212 (2020)
Verlags DOI -
Design and mechanical integrity of friction riveted joints of thermoplastic composite
Technische Universität Hamburg (2020)
Open Access -
Digitale und analoge MINT‐Bildungskonzepte, die Schule, Hochschule und Unternehmen zusammenbringen
Chemie Ingenieur Technik 9 (92): 1185-1185 (2020)
Verlags DOI -
Durability of flax fibre/bio-epoxy sustainable composites for structural application
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 37: (2020)
Open Access -
Mechanical integrity and corrosion behavior of metal-composite hybrid joints produced with Friction Spot Joining
Technische Universität Hamburg (2020)
Open Access -
Near-infrared laser surface treatment of milled CFRP aircraft structures for bonded repair applications
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 38: (2020)
Open Access
2019
-
Zero stress aging of glass and carbon fibers in water and oil : strength reduction explained by dissolution kinetics
Fibers 7 (12): 107 (2019)
Open Access | Verlags DOI -
Low-velocity impact response of friction riveted joints for aircraft application
Materials and Design (186): 108369 (2020)
Open Access | Verlags DOI -
Time-temperature-plasticization superposition principle : predicting creep of a plasticized epoxy
Polymers 11 (11): 1848 (2019)
Open Access | Verlags DOI -
Extreme scale-dependent tensile properties of epoxy fibers
Express Polymer Letters 11 (13): 993-1003 (2019-11)
Open Access | Verlags DOI -
Systematically Designed Periodic Electrophoretic Deposition for Decorating 3D Carbon-Based Scaffolds with Bioactive Nanoparticles
ACS Biomaterials Science and Engineering 9 (5): 4393-4404 (2019-09-09)
Verlags DOI -
Individual CdS-covered aerographite microtubes for room temperature VOC sensing with high selectivity
Materials Science in Semiconductor Processing (100): 275-282 (2019-09)
Verlags DOI -
Towards structural health monitoring using vibro-acoustic modulation in the real world
GI/ITG KuVS FachGespräch SensorNetze, FGSN 2019 : pp. 21-24 (2019-09)
Open Access | Verlags DOI -
Effect of fabric architecture, compaction and permeability on through thickness thermoplastic melt impregnation
Composites Part A: Applied Science and Manufacturing (122): 45-53 (2019-07)
Verlags DOI -
System and method for inspection of rotating or buried elements
Technische Universität Hamburg (2019)
Open Access -
Effects of hygrothermal ageing on the interphase, fatigue, and mechanical properties of glass fibre reinforced epoxy
Fibers 6 (7): 1-23 (2019-06)
Open Access | Verlags DOI -
Anomalous water diffusion in epoxy/carbon nanoparticle composites
Polymer Degradation and Stability (164): 127-135 (2019-06)
Verlags DOI -
Experimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loading
CEAS Aeronautical Journal 2 (10): 565-587 (2019-06)
Verlags DOI -
In-line monitoring of carbon nanoparticle epoxy dispersion processes: Insights into the process via next generation three roll mills and impedance spectroscopy
Production Engineering 3-4 (13): 373-390 (2019-06)
Verlags DOI -
Theoretical Computational Fluid Dynamics Study of the Chemical Vapor Deposition Process for the Manufacturing of a Highly Porous 3D Carbon Foam
Chemical Engineering and Technology 6 (42): 1240-1246 (2019-06)
Verlags DOI -
Evaluation and modeling of the fatigue damage behavior of polymer composites at reversed cyclic loading
Materials 12 (11): 1727 (2019)
Open Access | Verlags DOI -
Highly otimized nitrogen-doped MWCNTs through in-depth parametric study using design of experiments
Nanomaterials 9 (4): 643 (2019)
Open Access | Verlags DOI -
Processing, growth mechanism and thermodynamic calculations of carbon foam with a hollow tetrapodal morphology – Aerographite
Applied Surface Science (470): 535-542 (2019-03-15)
Verlags DOI -
Data science based mg corrosion engineering
Frontiers in Materials (6): 1-9 (2019-03-08)
Open Access | Verlags DOI -
The influence of clamping pressure on joint formation and mechanical performance of Ti6Al4V/CF-PEEK friction-riveted joints
Materials 5 (12): Art.-Nr. 745 (2019)
Open Access | Verlags DOI -
Prediction of thermal exposure and mechanical behavior of epoxy resin using artificial neural networks and Fourier transform infrared spectroscopy
Polymers 11 (2): 363 (2019)
Open Access | Verlags DOI -
Improving gas sensing by CdTe decoration of individual Aerographite microtubes
Nanotechnology 6 (30): 065501 (2019-02-08)
Verlags DOI -
Combined Computational and Experimental Study on the Influence of Surface Chemistry of Carbon-Based Electrodes on Electrode-Electrolyte Interactions in Supercapacitors
Journal of Physical Chemistry C 5 (123): 2716-2727 (2019-02-07)
Verlags DOI -
Biomimetic Carbon Fiber Systems Engineering: A Modular Design Strategy To Generate Biofunctional Composites from Graphene and Carbon Nanofibers
ACS applied materials & interfaces 5 (11): 5325-5335 (2019-02-06)
Verlags DOI -
Carbon nanoparticles’ impact on processability and physical properties of epoxy resins : a comprehensive study covering rheological, electrical, thermo-mechanical, and fracture properties (mode I and II)
Polymers 11 (2): 231 (2019)
Open Access | Verlags DOI -
Damage mechanisms of tailored few-layer graphene modified CFRP cross-ply laminates
Composites Part A: Applied Science and Manufacturing (117): 332-344 (2019-02)
Verlags DOI -
Maximizing bearing fatigue lifetime and CAI capability of fibre metal laminates by nanoscale sculptured Al plies
Composites Part A: Applied Science and Manufacturing (117): 144-155 (2019-02)
Verlags DOI -
Tailored crystalline width and wall thickness of an annealed 3D carbon foam composites and its mechanical property
Carbon (142): 60-67 (2019-02)
Verlags DOI -
Experimentelle und modellhafte Untersuchung von FKV-Verbindungselementen bei statischer und zyklischer Belastung
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 34: (2019)
Open Access -
Development of a colored GFRP with antistatic properties
AIP Conference Proceedings 2055, 090007 (2019)
Open Access | Verlags DOI -
Development of overset strategies for LBM-based flow solvers
Technische Universität Hamburg (2019)
Open Access -
Elektrische, piezoresistive und thermische Charakterisierung der Kohlenstoffstruktur "Aerographit" und deren Epoxidkomposite
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 31: (2019)
Open Access -
Fundamentals of the growth mechanism, tailored properties and applications of 3D hollow carbon foams
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 36: (2019)
Open Access -
Ultrasonic joining of through-the-thickness reinforced metal-composite hybrid structures
Technische Universität Hamburg (2019)
Open Access
2018
-
Comparison of analytical approaches predicting the compressive strength of fibre reinforced polymers
Materials 11 (12): 2517 (2018)
Open Access | Verlags DOI -
Influence of temperature and impact energy on low velocity impact damage severity in CFRP
Composites Part A: Applied Science and Manufacturing (115): 76-87 (2018-12)
Verlags DOI -
Multifunctional fibre metal laminates with improved load bearing capability
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 33: (2018)
Open Access -
Poröses Material zur Verwendung in einem katalytischen Prozess
Open Access -
Reaching maximum inter-laminar properties in GFRP/nanoscale sculptured aluminium ply laminates
Composites Science and Technology (167): 32-41 (2018-10-20)
Verlags DOI -
Hierarchical aerographite 3D flexible networks hybridized by InP micro/nanostructures for strain sensor applications
Scientific reports 1 (8): 13880- (2018-09-17)
Open Access | Verlags DOI -
Frequency or amplitude? : Rheo-electrical characterization of carbon nanoparticle filled epoxy systems
Polymers 10 (9): 999 (2018)
Open Access | Verlags DOI -
Detection and localization of impact damages in carbon nanotube–modified epoxy adhesive films with printed circuits
Structural Health Monitoring 5 (17): 1166-1177 (2018-09-01)
Verlags DOI -
Electrical, thermal and thermo-mechanical properties of epoxy/multi-wall carbon nanotubes/mineral fillers nanocomposites
Journal of Composite Materials 23 (52): 3209-3217 (2018-09-01)
Verlags DOI -
Manufacturing of a hierarchical carbon foam with tailored catalytically Me/Me x O y particles
Vacuum (155): 490-495 (2018-09)
Verlags DOI -
Smart dispersion: Validation of OCT and impedance spectroscopy as solutions for in-situ dispersion analysis of CNP/EP-composites
Materialia (1): 185-197 (2018-09)
Verlags DOI -
Structural health monitoring of carbon fiber reinforced polymers and carbon nanotube modified adhesive joints via electrical resistance measurement
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 32: (2018)
Open Access -
Influence of furfuryl alcohol fiber pre-treatment on the moisture absorption and mechanical properties of flax fiber composites
Fibers 6 (3): 59 (2018)
Open Access | Verlags DOI -
Composite surface pre-treatments: Improvement on adhesion mechanisms and mechanical performance of metal–composite friction spot joints with additional film interlayer
Journal of Adhesion 9 (94): 723-742 (2018-07-29)
Verlags DOI -
Thinner and better: (Ultra-)low grammage bacterial cellulose nanopaper-reinforced polylactide composite laminates
Composites Science and Technology (167): 126-133 (2018-10-20)
Open Access | Verlags DOI -
Finite element simulation of pole vaulting
Sports Engineering 2 (21): 85-93 (2018-06-01)
Open Access | Verlags DOI -
(Ultra-)low grammage bacterial cellulose nanopaper-reinforced polylactide composite laminates
European Conference on Composite Materials, ECCM: (2018-06)
-
Effect of laser surface treatment on the adhesive properties of bonded CFRP joints
ECCM 2018 - 18th European Conference on Composite Materials: (2018-06)
-
Hierarchical carbon fibre reinforced plastics with tailored nanoparticle modification - Benefits and limitations
18th European Conference on Composite Materials (ECCM 2018)
-
Influence of carbon nanoparticle geometry in epoxy matrix on mechanical properties and failure initiation regarding the size effect
European Conference on Composite Materials, ECCM: (2018-06)
-
Influence of temperature and impact energy on low velocity impact damage severity in CFRP
ECCM 2018 - 18th European Conference on Composite Materials: (2018-06)
-
Surface modification of highly porous 3D networks via atmospheric plasma treatment
Contributions to Plasma Physics 5 (58): 384-393 (2018-06)
Verlags DOI -
Structural health monitoring of fibre metal laminates under mode I and II loading
Composites Part A: Applied Science and Manufacturing (107): 471-478 (2018-04)
Verlags DOI -
Direct-Friction Riveting of polymer composite laminates for aircraft applications
Materials Letters 215: 31-34 (2018)
Verlags DOI -
Health monitoring of scarfed CFRP joints under cyclic loading via electrical resistance measurements using carbon nanotube modified adhesive films
Composites Part A: Applied Science and Manufacturing (105): 150-155 (2018-02)
Verlags DOI -
Influence of rotational speed on the microstructure and mechanical performance of friction-riveted thermosetting composite joints
Welding International 1 (32): 11-21 (2018-01-02)
Verlags DOI -
Influence of the interlayer film thickness on the mechanical performance of AA2024-T3/CF-PPS hybrid joints produced by friction spot joining
Welding International 1 (32): 1-10 (2018-01-02)
Verlags DOI -
Carbon nanotube-based composites
Comprehensive Composite Materials 2 (6-8): 201-229 (2018)
Verlags DOI -
Fundamentals of the temperature-dependent electrical conductivity of a 3D carbon foam—Aerographite
Synthetic Metals (235): 145-152 (2018-01)
Verlags DOI -
Intelligente Reaktoren: Kombination von Stimuli-responsiven Hydrogelen und 3D-Druck
Chemie Ingenieur Technik 9 (90): 1211-1212 (2018)
Verlags DOI -
Laser welding and processing of aluminium and titanium alloys for aerospace application
Technische Universität Hamburg (2018)
-
Relaxation-driven water diffusion in epoxy resin filled with various carbon nanoparticles
18th European Conference on Composite Materials (ECCM 2018)
-
Simulation and optimization of the load introduction geometry of additively manufactured lattice structure specimens
18th European Conference on Composite Materials (ECCM 2018)
-
Thermomechanical characteristics of ODF-silica Nafion® nanocomposite for PEMFCs application
Materials Today Proceedings 6 (5): 14026-14030 (2018)
Verlags DOI
2017
-
Health monitoring of CFRP using printed circuits
JEC Composites Magazine 117 (54): 61-63 (2017-11-01)
-
Influence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap joints
Welding in the World 6 (61): 1099-1115 (2017-11-01)
Verlags DOI -
3D carbon networks and their polymer composites: fabrication and electromechanical investigations of neat aerographite and aerographite-based PNCs under compressive load
Carbon (111): 103-112 (2017-01-01)
Verlags DOI -
Compression fracture of CFRP laminates containing stress intensifications
Materials 10(2017),9: 1039
Open Access | Verlags DOI -
Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink
Advanced Manufacturing: Polymer & Composites Science, 3 (2017), 3, S. 110-119
Open Access | Verlags DOI -
Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes
Journal of colloid and interface science (506): 620-632 (2017)
Open Access | Verlags DOI -
Friction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performance
Welding International 7 (31): 509-518 (2017-07-03)
Verlags DOI -
Individual hollow and mesoporous aero-graphitic microtube based devices for gas sensing applications
Applied Physics Letters 26 (110): 263109 (2017-06-26)
Verlags DOI -
Ultra-hoch gefüllte und orientierte CNT- und 3D-vernetzte Aerographit Epoxidkomposite: Synthese, Herstellung und Eigenschaften
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 29: (2017)
Open Access -
Nanomechanics of individual aerographite tetrapods
Nature communications (8): 14982- (2017-04-12)
Open Access | Verlags DOI -
Nanomechanics of individual aerographite tetrapods
Nature communications (8): 14982- (2017-04-12)
Open Access | Verlags DOI -
Hysteresis analysis and control of a metal-polymer hybrid soft actuator
Energies 4 (10): 508 (2017)
Open Access | Verlags DOI -
Hierarchical aerographite nano-microtubular tetrapodal networks based electrodes as lightweight supercapacitor
Nano Energy (34): 570-577 (2017-04)
Verlags DOI -
Influence of the microstructure on effective mechanical properties of carbon nanotube composites
Coupled Systems Mechanics 1 (6): 1-15 (2017-03-01)
Verlags DOI -
On the process-related rivet microstructural evolution, material flow and mechanical properties of Ti-6Al-4V/GFRP friction-riveted joints
Materials 2 (10): 184 (2017)
Open Access | Verlags DOI -
A numerical model to verify the electrical response of carbon fiber reinforced plastics in a three point bending test
Simulation for Additive Manufacturing 2017, Sinam 2017 (2017-October): 141 (2017)
-
An overview on the materials and mechanical behavior used in fused deposition modeling
Annual Technical Conference - ANTEC, Conference Proceedings (2017-May): 1689-1695 (2017)
-
Carbon fiber-carbon nanotube multiscale composites - the key to multifunctionality
CAMX 2017 - Composites and Advanced Materials Expo (2017-December): (2017)
-
Growth model of a carbon based 3D structure (Aerographite) and electrical/mechanical properties of composites
ICCM International Conferences on Composite Materials (2017-August): (2017)
-
Impact damage detection and localization of adhesively bonded fiber reinforced structures using silver nanoparticle based printed circuits
Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017 (1): 1461-1468 (2017)
-
Impact of carbon nanoparticles on fatigue properties and damage mechanisms of carbon fibre-reinforced epoxy
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 30: (2017)
-
Influence of carbon nanoparticle geometry in epoxy matrix on mechanical properties and failure initiation regarding the size effect
ICCM International Conferences on Composite Materials : (2017-08)
-
Ply-tailored nanoparticle matrix modification in cross-ply CFRP laminates
ICCM International Conferences on Composite Materials (2017-August): (2017)
-
Structural health monitoring of multifunctional fibre metal laminates under mode i loading
Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017 (2): 1976-1983 (2017)
-
Ultrasonic joining of through-the-thickness reinforced TI-4AL-6V and polyetherimide hybrid joints
Annual Technical Conference - ANTEC, Conference Proceedings (2017-May): 1718-1724 (2017)
2016
-
Gerichtete MWCNT/ Polypyrrol Hybride als Material für anisotrope Aktuatoren
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 28:: (2016)
Open Access -
Influence of voids and impact damage on the fatigue behaviour of large scale composites
Materialwissenschaft und Werkstofftechnik 11 (47): 1058-1071 (2016-11-01)
Verlags DOI -
Chemical changes in polyetherimide (PEI) joined by friction-based injection clinching joining (F-ICJ) technique
AIP Conference (2016)
Verlags DOI -
New test approach to determine the transverse tensile strength of CFRP with regard to the size effect
Composites Communications (1): 54-59 (2016)
Verlags DOI -
Morphological influence of carbon nanofillers on the piezoresistive response of carbon nanoparticle/epoxy composites under mechanical load
European Polymer Journal (85): 198-210 (2016)
Verlags DOI -
Low powered, tunable and ultra-light aerographite sensor for climate relevant gas monitoring
Journal of Materials Chemistry A 42 (4): 16723-16730 (2016)
Open Access | Verlags DOI -
Electro-mechanical piezoresistive properties of three dimensionally interconnected carbon aerogel (Aerographite)-epoxy composites
Composites Science and Technology (134): 226-233 (2016)
Verlags DOI -
Size effect of graphene nanoparticle modified epoxy matrix
Composites Science and Technology (134): 217-225 (2016)
Open Access | Verlags DOI -
Hierarchical analysis of the degradation of fibre-reinforced polymers under the presence of void imperfections
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 2071 (374): 20150279 (2016-07-13)
Verlags DOI -
A tunable scaffold of microtubular graphite for 3D cell growth
ACS Applied Materials and Interfaces 24 (8): 14980-14985 (2016-06-22)
Open Access | Verlags DOI -
Friction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanisms
Composites Part B: Engineering (94): 197-208 (2016-06-01)
Verlags DOI -
Charactersiation of fibre-metal-laminates under bearing loading
European Conference on Composite Materials (ECCM 2016)
-
Direct thermoplastic melt impregnation of carbon fibre fabrics by injection moulding
European Conference on Composite Materials (ECCM): (2016-06)
-
Electrical and thermal conductivity of aerogel/epoxy composites
European Conference on Composite Materials (ECCM): (2016-06)
-
Graphene modified CFRP for enhanced damage behavior
European Conference on Composite Materials (ECCM): (2016-06)
-
Influence of 90°-layer thickness on damage initiation and propagation in CFRP cross-ply laminates
European Conference on Composite Materials (ECCM): (2016-06)
-
Influence of graphene nanoparticles on the size effect of epoxy matrix
European Conference on Composite Materials (ECCM): (2016-06)
-
Investigation of the thermal conductivity of hexagonal boron nitride epoxy composites
European Conference on Composite Materials (ECCM): (2016-06)
-
Online-monitoring of carbon fiber reinforced plastics using silver nanoparticle based ink
European Conference on Composite Materials, ECCM: (2018-06)
-
Numerical simulation and experimental investigation of the viscoelastic heating mechanism in ultrasonic plasticizing of amorphous polymers for micro injection molding
Polymers 5 (8): 199 (2016)
Open Access | Verlags DOI -
Electrical conductivity of melt-spun thermoplastic poly(hydroxy ether of bisphenol A) fibres containing multi-wall carbon nanotubes
Polymer (97): 80-94 (2016-08-05)
Verlags DOI -
Ultrasonic joining: A novel direct-assembly technique for metal-composite hybrid structures
Materials Letters 170: 1-4 (2016)
Verlags DOI -
Preliminary analytical modeling of heat input in friction riveting
Annual Technical Conference - ANTEC: 1310-1317 (2016-05)
-
Self-assembly of nanoscale lateral segregation profiles
Physical Review B 16 (93): 161402 (2016-04-07)
Verlags DOI -
Nanostructured MWCNT/Polypyrrole Actuators with Anisotropic Strain Response
Advanced Engineering Materials 4 (18): 597-607 (2016-04-01)
Verlags DOI -
Self-organized three-dimensional nanostructured architectures in bulk GaN generated by spatial modulation of doping
ECS Journal of Solid State Science and Technology 5 (5): P218-P227 (2016)
Verlags DOI -
Characteristics and mechanisms of polymer interfacial friction heating in ultrasonic plasticization for micro injection molding
Microsystem Technologies 5 (23): 1385-1392 (2017-05-01)
Verlags DOI -
On the feasibility of a friction-based staking joining method for polymer-metal hybrid structures
Materials and Design (92): 632-642 (2016-02-15)
Verlags DOI -
Failure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniques
Composites Part A: Applied Science and Manufacturing (81): 121-128 (2016-02-01)
Verlags DOI -
Fracture, failure and compression behaviour of a 3D interconnected carbon aerogel (Aerographite) epoxy composite
Composites Science and Technology (122): 50-58 (2016-01-18)
Verlags DOI -
Influência da velocidade de rotação do rebite na microestrutura e no desempenho mecânico de juntas de compósito termofixo rebitadas por fricção
Soldagem e Inspecao 1 (21): 30-43 (2016-01-01)
Open Access | Verlags DOI -
Influência da espessura do filme polimérico intermediário na resistência mecânica de juntas híbridas de alumínio 2024-T3 e CF-PPS produzidas por união pontual por fricção
Soldagem e Inspecao 1 (21): 2-15 (2016-01-01)
Open Access | Verlags DOI
2015
-
Rebitagem por fricção (“FricRiveting”) de liga de alumínio 6056 T6 e poliamida 6: influência da velocidade de rotação na formação da zona de ancoragem e no desempenho mecânico
Soldagem e Inspecao 4 (20): 489-500 (2015)
Open Access | Verlags DOI -
Toughening mechanisms in polymer nanocomposites: from experiments to modelling
Composites Science and Technology (123): 187-204 (2016-02-08)
Verlags DOI -
Erratum: On the manufacturing and electrical and mechanical properties of ultra-high wt.% fraction aligned MWCNT and randomly oriented CNT epoxy composites (Carbon (2015) 91 (275-290))
Carbon (98): 195 (2016-03-01)
Verlags DOI -
XPS analysis of the interface between AA2024-T3/CF-PPS friction spot joints
Surface and Interface Analysis 8 (48): 706-711 (2016-08-01)
Verlags DOI -
Voids and their effect on the strain rate dependent material properties and fatigue behaviour of non-crimp fabric composites materials
Composites Part B: Engineering (83): 346-351 (2015-12-15)
Verlags DOI -
Friction spot welding of carbon fiber-reinforced polyamide 66 laminate
Materials Letters 159: 506-509 (2015)
Verlags DOI -
Influence of voids on the compressive failure behaviour of fibrereinforced composites
Composites Science and Technology (117): 225-233 (2015)
Verlags DOI -
Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap joints
Materials and Design 83: 431-442 (2015-10-15)
Verlags DOI -
Microstructure and mechanical performance of metal-composite hybrid joints produced by FricRiveting
Composites Part B: Engineering 81: 130-140 (2015-08-08)
Verlags DOI -
Strain-dependent electrical resistance of epoxy/MWCNT composite after hydrothermal aging
Composites Science and Technology (117): 107-113 (2015-09-29)
Verlags DOI -
New functions in polymer composites using a nanoparticle-modified matrix
Multifunctionality of Polymer Composites: Challenges and New Solutions: 875-902 (2015-05-26)
Verlags DOI -
On the manufacturing and electrical and mechanical properties of ultra-high wt.% fraction aligned MWCNT and randomly oriented CNT epoxy composites
Carbon (91): 275-290 (2015-05-30)
Verlags DOI -
Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites
Composites Science and Technology (115): 1-8 (2015-08-02)
Verlags DOI -
Friction Riveting (FricRiveting) as a new joining technique in GFRP lightweight bridge construction
Construction and Building Materials 80: 167-179 (2015-04-01)
Verlags DOI -
Three-dimensional Aerographite-GaN hybrid networks: single step fabrication of porous and mechanically flexible materials for multifunctional applications
Scientific Reports (5): Art.-Nr. 8839 (2015)
Open Access | Verlags DOI -
A micromechanical approach to investigate the influence of voids on the structural behaviour of FRP under compression loading
ICCM International Conferences on Composite Materials: (2015)
-
Bearing response of fibre metal laminates consitsting of gfrp and woven metallic fabrics
ICCM International Conferences on Composite Materials 2015-July: (2015-01-01)
-
Failure mechanisms, electrical and thermal conductivity of Aerographite/epoxy composite
ICCM International Conferences on Composite Materials (2015-July): (2015)
-
Force controlled friction riveting of glass fiber reinforced polyamide 6 and aluminum alloy 6056 hybrid joints
ANTEC 2015 : proceedings of the technical conference & exhibition Orlando, Florida, USA March 23-25, 2015. - Newtown, Conn., 2015. - Pp. 1905-1912
-
Friction spot joining of metal-composite hybrid structures
Open Access -
Friction-based injection clinching joining (F-ICJ): a new joining method for hybrid lightweight structures
Open Access -
Influence of impact damage on the fatigue behaviour of large scale composites
ICCM International Conferences on Composite Materials (2015-July): (2015)
-
Influence of ply thickness on the fibre matrix debonding
ICCM International Conferences on Composite Materials: (2015-07)
2014
-
Tough alumina/polymer layered composites with high ceramic content
Journal of the American Ceramic Society 4 (98): 1285-1291 (2015)
Verlags DOI -
Influence of delamination characteristics in carbon fibre/epoxy laminates on signal features of pulse thermography
Journal of Nondestructive Evaluation 1 (34): 5 (2015)
Verlags DOI -
Determining the effect of voids in GFRP on the damage behaviour under compression loading using acoustic emission
Composites Part B: Engineering (70): 184-188 (2015-03-01)
Verlags DOI -
Experimental characterization of shape memory alloys
Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications: 57-77 (2015)
Verlags DOI -
Is it worth the effort to reinforce polymers with carbon nanotubes?
Carbon Nanotube Reinforced Composites: CNR Polymer Science and Technology: 207-232 (2015)
Verlags DOI -
Improvement of bonding strength of scarf-bonded carbon fibre/epoxy laminates by Nd:YAG laser surface activation
Composites Part A: Applied Science and Manufacturing 67: 123-130 (2014-12-01)
Verlags DOI -
The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy
Composites Part A: Applied Science and Manufacturing 67: 233-240 (2014-12-01)
Verlags DOI -
Friction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRP
Polymer 55 (20): 5146-5159 (2014)
Verlags DOI -
Evaluation of a critical impact energy in GFRP under fatigue loading
Composites Science and Technology 102: 28-34 (2014-10-06)
Verlags DOI -
Nanocomposite based structural health monitoring approaches for fibre reinforced polymers on doorstep to industrial relevance after two decades of intense research?
7th European Workshop on Structural Health Monitoring, EWSHM 2014 - 2nd European Conference of the Prognostics and Health Management (PHM) Society : 1788-1793 (2014-01-01)
-
Damage mechanisms of nanoparticle-modified CFRP under very high cycle fatigue-loading
16th European Conference on Composite Materials, ECCM 2014: (2014)
-
Influence of impact damages on the fatigue behaviour of composites
16th European Conference on Composite Materials, ECCM 2014: (2014)
-
Inverstigation on the failure mechanism of composite fasteners with countersunk head in fatigue loading
16th European Conference on Composite Materials, ECCM 2014: (2014)
-
Protective effect of thin alumina layer on carbon fibre to preserve tensile strength during CNT growth by CVD
16th European Conference on Composite Materials, ECCM 2014: (2014)
-
Manufacture and characterization of conductor-insulator composites based on carbon nanotubes and thermally reduced graphene oxide
Pure and Applied Chemistry 86 (5): 765-774 (2014)
Verlags DOI -
Fracture toughness and failure mechanism of graphene based epoxy composites
Composites Science and Technology 97 (): 90-99 (2014-06-16)
Verlags DOI -
Development of nano-particle modified polymer matrices for improved fibre reinforced composites
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 20: (2014)
Open Access -
Mikrostrukturelle Betrachtung des Einflusses von Poren auf die mechanischen Eigenschaften von faserverstärkten Kunststoffen
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 22: (2014)
Open Access
2013
-
Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite : mechanical, electrical and thermal properties
European Polymer Journal 12 (49): 3878-3888 (2013)
Verlags DOI -
Improvement of compressive strength after impact in fibre reinforced polymer composites by matrix modification with thermally reduced graphene oxide
Composites Science and Technology (87): 36-41 (2013)
Verlags DOI -
Effect of filler functionalization on thermo-mechanical properties of polyamide-12/carbon nanofibers composites : a study of filler-matrix molecular interactions
Journal of Materials Science 24 (48): 8427-8437 (2013)
Verlags DOI -
Water transport in epoxy/MWCNT composites
European Polymer Journal 8 (49): 2138-2148 (2013)
Verlags DOI -
Nanocomposite toughness from a pull-out mechanism
Composites Science and Technology (83): 27-31 (2013)
Verlags DOI -
Photoelastic study of stresses in the vicinity of a unique void in a fibre-reinforced model composite under compression
Composites Science and Technology (84): 72-77 (2013)
Verlags DOI -
The production of aligned MWCNT/polypyrrole composite films
Carbon (60): 229-235 (2013)
Verlags DOI -
Electrical characterization of polyethylene oxide-alumina composite
Journal of Thermoplastic Composite Materials 2 (26): 176-192 (2013)
Verlags DOI -
Thermally reduced graphene oxide acting as a trap for multiwall carbon nanotubes in bi-filler epoxy composites
Composites Part A: Applied Science and Manufacturing (49): 51-57 (2013)
Verlags DOI -
Damage phenomena of fibre reinforced composites under vhcf-loading
International Conference on Composite Materials 2013 : (ICCM-19) ; Montreal, Quebec, Canada, 28 July - 2 August 2013 / [organized by Canadian Association for Composite Structures and Materials (CACSMA)]. Ed.: Suong Van Hoa. - Red Hook, NY : Curran. - Vol. 3 (2013). - Seite 1848-1853
-
Development of polymer composite membranes with functionalized nanoparticles for fuel cell application
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 19: (2013)
Open Access -
Investigation on the failure mechanisms of composite fasteners with countersunk head in quasistatic and fatigue loading
International Conference on Composite Materials (ICCM 2013)
-
The influence of delamination opening in carbon fibre/epoxy laminates on signal characteristics of pulse phase thermography
International Conference on Composite Materials 2013 : (ICCM-19) ; Montreal, Quebec, Canada, 28 July - 2 August 2013 / [organized by Canadian Association for Composite Structures and Materials (CACSMA)]. Ed.: Suong Van Hoa. - Red Hook, NY : Curran. - Vol. 6 (2013). - Seite 4224-4231
2012
-
Hydrothermally resistant thermally reduced graphene oxide and multi-wall carbon nanotube based epoxy nanocomposites
Polymer Degradation and Stability 2 (98): 519-526 (2013)
Verlags DOI -
Comparison of new conductive adhesives based on silver and carbon nanotubes for solar cells interconnection
Solar Energy Materials and Solar Cells 109 (): 155-159 (2013)
Verlags DOI -
Improvement of carbon nanotube dispersion in thermoplastic composites using a three roll mill at elevated temperatures
Composites Science and Technology (74): 78-84 (2013)
Verlags DOI -
Impact of filler functionalisation on the crystallinity, thermal stability and mechanical properties of thermoplastic elastomer/carbon nanotube nanocomposites
Macromolecular Materials and Engineering 3 (298): 359-370 (2013)
Verlags DOI
2011
-
Novel ceramic-polymer composites synthesized by compaction of polymer-encapsulated TiO2-nanoparticles
Composites Science and Technology 72 (1): 65-71 (2011)
Verlags DOI -
Combined electrical and rheological properties of shear induced multiwall carbon nanotube agglomerates in epoxy suspensions
European Polymer Journal 47 (11): 2069-2077 (2011)
Verlags DOI -
Charakterisierung der Dispersionsgüte von Carbon Nanotubes in Polymer-Nanokompositen
Chemie-Ingenieur-Technik 83 (6): 767-781 (2011)
Verlags DOI -
A highly efficient one-pot method for the synthesis of carbon black/poly(4,4′-Diphenylether-1,3,4-Oxadiazoles) composites
Macromolecular Chemistry and Physics 212 (12): 1236-1244 (2011)
Verlags DOI -
Fast and highly efficient one-pot synthesis of polyoxadiazole/carbon nanotube nanocomposites in mild acid
Polymer International 60 (3): 517-528 (2011)
Verlags DOI -
Comparison of rheological and electrical percolation phenomena in carbon black and carbon nanotube filled epoxy polymers
Journal of Materials Science 46 (3): 659-669 (2011)
Verlags DOI -
Entwicklung und Gestaltungspotenzial von Fahrzeugsitzen unter Einsatz dielektrischer Elastomeraktoren
Technisch-wissenschaftliche Schriftenreihe / TUHH Polymer Composites 15: (2011)
Open Access -
Fundamental investigations of carbon nanotubes working as actuators
Proceedings of SPIE - The International Society for Optical Engineering 7978 (): 79780O (2011)
Verlags DOI -
Poly(butylene terephthalate)/oxytetramethylene + oxidized single wall carbon nanotubes hybrids : mechanical and tribological behavior
Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011 ; 13 June 2011 through 16 June 2011 ; Vol.1 (): 604-607 (2011)
-
Simultaneous global and local strain sensing in SWCNT-epoxy composites by Raman and impedance spectroscopy
Composites Science and Technology 71 (2): 160-166 (2011)
Verlags DOI -
The imaging mechanism, imaging depth, and parameters influencing the visibility of carbon nanotubes in a polymer matrix using an SEM
Carbon 49(6) 1955-1964 (2011)
Verlags DOI
2010
-
Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities
Acta Biomaterialia 6 (10): 4127-4135 (2010)
Verlags DOI -
Surface modification of alumina nanoparticles with silane coupling agents
Journal of the Brazilian Chemical Society 12 (21): 2238-2245 (2010-01-01)
Open Access | Verlags DOI -
Osteoclastic bioresorption of biomaterials : two- and three-dimensional imaging and quantification
International Journal of Artificial Organs 33 (4): 198-203 (2010)
Verlags DOI
2009
-
Technical strategies to improve tissue engineering of cartilage-carrier- constructs
Advances in Biochemical Engineering/Biotechnology 112: 145–181 (2009)
Verlags DOI -
CFRP-recycling following a pyrolysis route : process optimization and potentials
Journal of Composite Materials 9 (43): 1121-1132 (2009)
Open Access | Verlags DOI
2008
-
Fracture behaviour of fumed silica/epoxy nanocomposites
Composites Part A: Applied Science and Manufacturing 39 (12): 1851-1858 (2008-12-01)
Verlags DOI
2007
-
An approach to minimize inhomogeneous stress distribution in compression testing of CFRP
ICCM International Conferences on Composite Materials (2007)
-
Analyzing the quality of carbon nanotube dispersions in polymers using scanning electron microscopy
Carbon (2007), doi:10.1016/j.carbon.2007.01.012
Open Access -
Synthesis and characterization of aliphatic polyesters from glycerol, by-product of biodiesel production, and adipic acid
Materials Research 4 (10): 335-339 (2007)
Open Access | Verlags DOI -
Synthesis and characterization of polyesters derived from glycerol and phthalic acid
Materials Research 3 (10): 257-260 (2007)
Open Access | Verlags DOI -
The influence of shearing and electric fields on the percolation threshold in carbon nanotube epoxy composites
16th International Conference on Composite Materials (ICCM 2007)
2006
-
Fundamental aspects of nano-reinforced composites
Composites Science and Technology 66 (16) : 3115-3125 (2006-12-18)
Verlags DOI -
Glass-fibre-reinforced composites with enhanced mechanical and electrical properties - Benefits and limitations of a nanoparticle modified matrix
Engineering Fracture Mechanics 73 (16) : 2346-2359 (2006-11)
Verlags DOI -
Experimental determination of the true epoxy resin strength using micro-scaled specimens
Composites Part A: Applied Science and Manufacturing 38 (3): 814-818 (2007-03-01)
Verlags DOI -
Micro/macro-mechanical approach of first ply failure in CFRP
Journal of Materials Science 41 (20) : 6760-6767 (2006-10)
Verlags DOI -
A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element
Composites Science and Technology 66 (11-12) : 1766-1777 (2006-09)
Verlags DOI -
Electrical conductivity of carbon black/fibres filled glass-fibre-reinforced thermoplastic composites
Composites Part A: Applied Science and Manufacturing 37 (9): 1390-1395 (2006-09)
Verlags DOI -
Multiwall carbon nanotube/epoxy composites produced by a masterbatch process
Mechanics of Composite Materials 42 (5): 395-406 (2006-09)
Verlags DOI -
On modelling the mechanical degradation of fatigue loaded glass-fibre non-crimp fabric reinforced epoxy laminates
Composites Science and Technology 66 (5) : 657-664 (2006-05)
Verlags DOI -
Reliability and life prediction of composite structures
Composites Science and Technology 66 (5) : 615 (2006-05)
Verlags DOI -
Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites
Polymer 47 (6) : 2036-2045 (2006-03-08)
Verlags DOI -
Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments
Composites Part A: Applied Science and Manufacturing 37 (12): 2248-2256 (2006-12-01)
Verlags DOI -
The influence of residual stresses implicated via cure volume shrinkage on CF/VEUH-composites
Journal of Materials Science 41 (2) : 383-388 (2006-01)
Verlags DOI -
Influence of surface treatment on mechanical behaviour of fumed silica/epoxy resin nanocomposites
Composite Interfaces 13 (8-9) : 699-715 (2006)
Verlags DOI -
Two percolation thresholds in carbon nanotube epoxy composites
Composites Science and Technology Volume 67, Issue 5, April 2007, Pages 922-928
Open Access | Verlags DOI
2005
-
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - A comparative study
Composites Science and Technology 65 : 2300-2313 (2005-12)
Verlags DOI -
Production and properties of glass fibre-reinforced polymer composites with nanoparticle modified epoxy matrix
Materials Research Society Symposium (2005)
Verlags DOI -
Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites
Composites Part A: Applied Science and Manufacturing 36 (11) : 1525-1535 (2005-11)
Verlags DOI -
Microscopic yielding of CF/epoxy composites and the effect on the formation of thermal residual stresses
Composites Science and Technology 65 (10): 1626-1635 (2005-08)
Verlags DOI -
Modelling of the transverse strength of fibre reinforced epoxy composite at low and high temperature
Composite Interfaces 12 (3-4) : 379-394 (2005-07-11)
Verlags DOI -
Influence of stress state and temperature on the strength of epoxy resins
11th International Conference on Fracture 2005 (ICF11)
-
Carbon nanotube and carbon nanofiber-reinforced polymer composites
Mechanical Properties of Polymers based on Nanostructure and Morphology: 603-628 (2005)
-
Materiais híbridos orgânico-inorgânicos: preparação e algumas aplicações=Hybrid organic-inorganic materials: preparation and some applications
Quimica Nova 2 (28): 281-288 (2005-01-01)
Open Access | Verlags DOI -
Modelling the strength of fibre-reinforced composites
In Woodhead Publishing Series in Composites Science and Engineering, Multi-Scale Modelling of Composite Material Systems, Woodhead Publishing (2005)
Verlags DOI
2004
-
Can carbon nanotubes be used to sense damage in composites?
Annales de Chimie: Science des Materiaux 29 (6): 81-94 (2004-11)
Verlags DOI -
Carbon nanotube-reinforced epoxy-composites: Enhanced stiffness and fracture toughness at low nanotube content
Composites Science and Technology 64 (15 SPEC. ISS.): 2363-2371 (2004-11)
Verlags DOI -
Thermomechanical analysis of micromechanical formation of residual stresses and initial matrix failure in CFRP
JSME international journal 47 (3) : 349-356 (2004-07)
Verlags DOI -
Modelling of the initial failure of CFRP structures by partial discretisation: A micro/macro-mechanical approach of first ply failure
Advanced Composites Letters 13 (5) : 219-226 (2004)
Verlags DOI -
Nondimensional simulation of tensile behavior of UD microcomposite under energy release rate and shear stress criteria for interfacial debonding
Composite Interfaces 11 (2) : 169-194 (2004)
Verlags DOI
2003
-
Comparison of interlaminar fracture toughness between CFRP and ALFRP laminates with common epoxy matrix at 77K in LN <inf>2</inf>
European Structural Integrity Society 32 (C): 421-432 (2003)
Verlags DOI
2002
-
The influence of thermal residual stresses on the transverse strength of CFRP using FEM
Composites Part A: Applied Science and Manufacturing 33 (10): 1323-1326 (2002-10)
Verlags DOI -
Mode I and II delamination fatigue crack growth behavior of alumina fiber/epoxy laminates in liquid nitrogen
International Journal of Fatigue 24 (2-4) : 109-118 (2002-01-26)
Verlags DOI
2001
-
Failure behavior of an epoxy matrix under different kinds of static loading
Composites Science and Technology 61 (11) : 1615-1624 (2001-08)
Verlags DOI -
Nondimensional simulation of influence of toughness of interface on tensile stress-strain behavior of unidirectional microcomposite
Composites - Part A: Applied Science and Manufacturing 32 (6): 749-761 (2001-06-01)
Verlags DOI -
Finite-element modeling of initial matrix failure in CFRP under static transverse tensile load
Composites Science and Technology 61 (1) : 95-105 (2001-01)
Verlags DOI
1999
-
Advanced calculation of the room-temperature shapes of unsymmetric laminates
Journal of Composite Materials 16 (33): 1472-1490 (1999)
Open Access | Verlags DOI -
Growth of interfacial debonding in notched two-dimensional unidirectional composite under stress and displacement controls
7th Symposium on Intrfacial Material Science of Composites (1999)
Verlags DOI -
Interfacial debonding in single fibre-composite with a cracked matrix - Part 1: Debonding during cooling
International Journal of Materials and Product Technology 14 (2-4) : 147-166 (1999)
Verlags DOI
1998
-
Stress concentrations in multiple fibre model composites
Composites Part A: Applied Science and Manufacturing 29 (9-10) : 1013-1019 (1998)
Verlags DOI
1997
-
A shear-lag approach to the early stage of interfacial failure in the fiber direction in notched two-dimensional unidirectional composites
Composites Science and Technology 57 (7) : 775-785 (1997)
Verlags DOI -
Fracture behaviour in metal fibre reinforced ceramics
Acta Materialia 45 (9) : 3609-3623 (1997)
Verlags DOI -
Photo-elastic analysis of fibre-reinforced model composite materials
Composites Science and Technology 57 (8) : 859-867 (1997)
Verlags DOI -
Stress distribution in single-fibre model composites with perfect bonding
Composites Science and Technology 57 (9-10) : 1331-1339 (1997)
Verlags DOI
1994
-
Study of structural changes of tellurium thin films on polymer substrates by electrical measurements and transmission electron microscopy
Thin Solid Films 245 (1-2) : 272-276 (1994-06-01)
Verlags DOI
1989
-
Design and fabrication of an on-line consolidation facility for thermoplastic composites
Journal of Thermoplastic Composite Materials 4 (2): 293-306 (1989)
Open Access | Verlags DOI
1988
-
Fracture toughness of short fiber/thermoplastic matrix composites, compared on the basis of different test methods
Journal of Thermoplastic Composite Materials 1 (1): 68-93 (1988)
Open Access | Verlags DOI -
Interlaminar Fracture Energy of Laminates Made of Thermoplastic Impregnated Fiber Bundles
Journal of Thermoplastic Composite Materials 3 (1): 221-231 (1988)
Open Access | Verlags DOI
Soziale Netzwerke
