2025

• Möhle, Florian; Koch, Svenja; Lödding, Hermann; Jahn, Carlos
  Modelling of logistics objectives at the sea side of container terminals
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Evers, Lasse; Müller, Matthias; Möller, Carsten; Brouschkin, Alexander; Dege, Jan Hendrik
  Control loop based dimensional error compensation for milling of near-net-shaped, thin-walled structures
  Decarbonizing Value Chains, ed. by Holger Kohl, Günther Seliger, Franz Dietrich, Ha Thuc Vien: 399-407 (2025)
  Open Access | Publisher DOI
• Mundt, Christopher; Weidner, Robert; Möller, Carsten; Dege, Jan Hendrik; Lödding, Hermann
  Der befähigte Werker: Kopplung von Smarten Handwerkzeugen, aktiven Exoskeletten und Digitalen Assistenzsystemen in der Produktion der Zukunft
  Zeitschrift für Wirtschaftlichen Fabrikbetrieb 120 (6): 457-463 (2025)
  Publisher DOI
• Brouschkin, Alexander; Möller, Carsten; Dege, Jan Hendrik
  Modeling Process Forces in CFRP Grinding: Influence of Cutting Materials and Coolant on Process Force Behavior
  20th CIRP Conference on Modeling of Machining Operations, CMMO 2025
  Open Access | Publisher DOI
• Petersen, Julian; Nourmohammadi, Amir; Fathi, Masood; Ghobakhloo, Morteza; Tavana, Madjid
  Line balancing for energy efficiency in production: a qualitative and quantitative literature analysis
  Computers & Industrial Engineering 205: 111144 (2025)
  Open Access | Publisher DOI
• Evers, Lasse; Zapf, Hannes; Blühm, Melchior Frieder; Dege, Jan Hendrik
  Verzugsminimierung bei der Zerspanung von AM-Halbzeugen
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 120 (4): 236-241 (2025)
  
• Grazi, Lorenzo; Feijoo Alonso, Abel; Gąsiorek, Adam; Pertusa Llopis, Afra Maria; Grajeda, Alejandro; Kanakis, Alexandros; Rodriguez Vidal, Ana; Parri, Andrea; Vidal, Felix; Ergas, Ioannis; Zeljkovic, Ivana; Durá, Javier Pamies; Mein, Javier Perez; Katsampiris-Salgado, Konstantinos; Rocha, Luís F.; Rodriguez, Lorena Núñez; Petry, Marcelo R.; Neufeld, Michal; Dimitropoulos, Nikos; Köster, Nina; Mimica, Ratko; Varão Fernandes, Sara; Crea, Simona; Makris, Sotiris; Giartzas, Stavros; Settler, Vincent; Masood, Jawad
  Methodology and challenges of implementing advanced technological solutions in small and medium shipyards: the case study of the Mari4_YARD project
  Electronics 14 (8): 1597 (2025)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Model based assessment of maximal surface temperatures and heat flow in edge trimming of UD CFRP with tools of different type
  Composites Part B: Engineering 300: 112483 (2025)
  Open Access | Publisher DOI
• Stützle, Joshua; Stammler, Matthias; Dege, Jan Hendrik; Thies, Christian
  Life cycle assessment of circular economy strategies for high-strength connection bolts in wind turbines
  32nd CIRP Conference on Life Cycle Engineering, LCE 2025
  Open Access | Publisher DOI
• Thürer, Matthias; Fernandes, Nuno O.; Lödding, Hermann; Stevenson, Mark
  Material flow control in make-to-stock production systems : an assessment of order generation, order release and production authorization by simulation
  Flexible Services and Manufacturing Journal 37 (1): 105055 (2025)
  Open Access | Publisher DOI
• Rawal, Parth Kapil
  An intelligent versatile pipeline for 6D localization of industrial components in a production environment
  Forschung für die Produktionstechnik von morgen 6: (2025)
  
• Steffens, Constantin; Lödding, Hermann
  Assessing the impact of cyclical sequencing in make-to-stock production with sequence-dependent setup times
  58th CIRP Conference on Manufacturing Systems, CMS 2025
  Open Access | Publisher DOI
• Pöttker, Silas; Benter, Martin; Kuhlang, Peter; Lödding, Hermann
  Rapid and highly detailed productivity analyses for assembly processes using motion capture systems
  58th CIRP Conference on Manufacturing Systems, CMS 2025
  Open Access | Publisher DOI
• Rawal, Parth; Sompura, Mrunal; Hintze, Wolfgang
  Synthetic data generation procedures for domain-specific environments in manufacturing
  Procedia Computer Science 253: 1668-1679 (2025)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  The role of material properties in modeling maximal surface temperatures and heat distribution in milling of UD CFRP
  CIRP journal of manufacturing science and technology 62: 24-37 (2025)
  Publisher DOI
• Lödding, Hermann; Steffens, Constantin; Winter, Michael
  The strong effect of flexible capacities on achievable WIP levels and throughput times : a simple model and its implications
  International Journal of Production Research 63 (6): 2291-2304 (2025)
  Open Access | Publisher DOI
• Köttner, Lars
  Zerspankraftmodellierung und Prozessgrenzen der Umrissbearbeitung von FKV-Bauteilen mit scheibenförmigen Werkzeugen
  Wissen schafft Innovation 57: (2025)
  Open Access

2024

• Petersen, Julian; Mundt, Christopher; Lödding, Hermann
  Development of a multi-method analysis for make-to-order manufacturers
  Congress of the German Academic Association for Production Technology, WGP 2024
  Publisher DOI
• Demke, Tabea Marie; Hiller, Tobias; Welzel, Kira; Steffens, Constantin; Mundt, Christopher; Alieksieiev, Volodymyr; Fulterer, Judith; Maetschke, Jan; Kuhn, Calvin; Kalchschmid, Vincent; Luber, Mario
  Status Quo on Production Planning and Control
  Journal of production systems and logistics 4: 10 (2024)
  Open Access | Publisher DOI
• Rawal, Parth; Valencia, Daniel; Hintze, Wolfgang
  An Intelligent Pipeline for Localization of Industrial Components in Robotic Manufacturing Applications
  27th European Conference on Artificial Intelligence, ECAI 2024
  Open Access | Publisher DOI
• Alieksieiev, Volodymyr; Beigpoor Shahrivar, Rafat; Jahn, Carlos; Lödding, Hermann
  Modeling of logistics objectives at rail-road inland transshipment terminals
  43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2024
  Publisher DOI
• Evers, Lasse; Blühm, Melchior Frieder; Weise, Tom; Dege, Jan Hendrik
  Rattervermeidung beim Fräsen mit Industrierobotern
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (9): 593-598 (2024)
  Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut
  3rd CIRP Conference on Composite Material Parts Manufacturing, CCMPM2024
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut
  Procedia CIRP 131: 19-25 (2025)
  Open Access | Publisher DOI
• Kilian, Leonie; Fehn, Patrick; Bischop, Floyd; Brouschkin, Alexander; Dege, Jan Hendrik; Krause, Dieter; Weigold, Matthias
  High-Precision Functional Surfaces on CFRP Components Investigation of Grinding Processes, Tribological Behavior, and the Service Life Based on the Example of Motor Spindle Components Made of Carbon Fiberreinforced Polymer (CFRP)
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 553-557 (2024)
  Publisher DOI
• Brouschkin, Alexander; Otto, Niklas; Möller, Carsten; Dege, Jan Hendrik
  Surface quality during grinding of CFRP
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 558-562 (2024)
  Publisher DOI
• Flehmke, Malte; Hinrichs, Marco; Möller, Carsten; Dege, Jan Hendrik
  Cutting carbon footprint with smart tool management and cemented carbide (WC-Co) upcycling
  6th Conference on Production Systems and Logistics, CPSL 2024
  Publisher DOI
• Köster, Nina; Lödding, Hermann
  Digitales Assistenzsystem für die Steuerung der maritimen Inbetriebnahme
  Schiff & Hafen 7: 16-19 (2024)
  
• Brouschkin, Alexander; Hintze, Wolfgang; Dege, Jan Hendrik
  Influence of spatial engagement angles on machining forces and surface roughness in turning of unidirectional CFRP
  CIRP Journal of Manufacturing Science and Technology 51: 201-212 (2024)
  Open Access | Publisher DOI
• Brouschkin, Alexander; Köttner, Lars; Hintze, Wolfgang; Dege, Jan Hendrik
  Prediction of surface profile in CFRP machining through phenomenological analysis and inverse continuous wavelet transformation
  7th CIRP Conference on Surface Integrity, CSI 2024
  Open Access | Publisher DOI
• Mundt, Christopher; Lödding, Hermann
  Coping with the uncertainties of make-to-order production : a new approach for determining reliable delivery times with the throughput diagram
  Production planning & control 36 (8): 1110-1136 (2025)
  Open Access | Publisher DOI
• Piontek, Simon; Gäbler, Marcel; Lödding, Hermann
  Integration of smart hand tools and digital assistance systems
  57th CIRP Conference on Manufacturing Systems, CMS 2024
  Open Access | Publisher DOI
• Petersen, Julian; Nourmohammadi, Amir; Fathi, Masood; Burmeister, Carsten
  Multi-objective optimization of transfer line balancing problem considering cycle time and energy expenditure
  57th CIRP Conference on Manufacturing Systems 2024, CMS 2024
  Open Access | Publisher DOI
• Brouschkin, Alexander; Köttner, Lars; Hintze, Wolfgang; Dege, Jan Hendrik
  Prediction of surface profile in CFRP machining
  Procedia CIRP 123: 143-148 (2024)
  Open Access
• Alieksieiev, Volodymyr; Winter, Jesse-James; Harlem, Jannick von; Grafelmann, Michaela; Jahn, Carlos; Lödding, Hermann
  Untersuchung von Doppelspielen eines Portalkrans auf Umschlagterminals
  32. Internationale Kranfachtagung 2024
  Open Access
• Kirchner, Eckhard; Wallmersperger, Thomas; Gwosch, Thomas; Menning, Johannes D. M.; Petersen, Julian; Breimann, Richard; Kraus, Benjamin; Welzbacher, Peter; Küchenhof, Jan; Krause, Dieter; Knoll, Erich; Otto, Michael; Hasse, Alexander; Muhammedi, Benjamin; Seltmann, Stephanie; Schäfer, Günter; Lohrengel, Armin; Thielen, Stefan; Stiemcke, Yvo; Koch, Oliver; Ewert, Arthur; Rosenlöcher, Thomas; Schlecht, Berthold; Prokopchuk, Artem; Henke, Ernst-Friedrich Markus; Herbst, Felix; Matthiesen, Sven; Riehl, Daniel; Keil, Ferdinand; Hofmann, Klaus; Pape, Florian; Konopka, Dennis; Poll, Gerhard; Steppeler, Tobias; Ottermann, Rico; Dencker, Folke; Wurz, Marc C.; Puchtler, Steffen; Baszenski, Julian Thao; Winnertz, Martin; Jacobs, Georg; Lehmann, Benajmin; Stahl, Karsten
  A review on sensor‐integrating machine elements
  Advanced Sensor Research 3 (4): 2300113 (2024)
  Open Access | Publisher DOI
• Brosche, Justus; Wackerle, Hannes; Augat, Peter; Lödding, Hermann
  Individualized workplace ergonomics using motion capture
  Applied Ergonomics 114: 104140 (2024)
  Publisher DOI
• Breitzke, André; Hintze, Wolfgang
  Workshop-suited identification of thermo-elastic errors of three-axis machine tools using on-machine measurement
  Precision Engineering 85: 72-88 (2024)
  Open Access | Publisher DOI
• Elzalabany, Ahmed
  A digital assistance system for maritime commissioning processes
  Wissen schafft Innovation 55: (2024)
  Open Access
• Pöttker, Silas; Jansen, Tim Maximilian; Lödding, Hermann
  Analyse von Arbeitsabläufen mit Motion-Capture-Systemen
  Industry 4.0 Science 40 (5): 43-49 (2024)
  Open Access | Publisher DOI
• Pöttker, Silas; Lödding, Hermann
  Digital assembly design with a motion capture system
  57th CIRP Conference on Manufacturing Systems, CMS 2024
  Open Access | Publisher DOI
• Köttner, Lars; Jakele, Lukas; Hintze, Wolfgang
  Kraftmodellierung beim Schleifen von UD-CFK unter räumlichen Eingriffsbedingungen
  Schweizer Schleif-Symposium, SSS 2024
  Open Access
• Winter, Michael
  Logistische Modellierung von Chargenarbeitssystemen
  Wissen schafft Innovation 54: (2024)
  Open Access
• Mundt, Christopher
  Modellbasierte Auftragsannahme und -terminierung
  Wissen schafft Innovation 53: (2024)
  Open Access
• Breitzke, André
  Modellbasierte Identifikation und Korrektur umgebungstemperaturabhängiger thermoelastischer Verlagerungen dreiachsiger Portalfräsmaschinen
  Wissen schafft Innovation 56: (2024)
  
• Kuthe, Jona; Alieksieiev, Volodymyr; Jansen, Tim Maximilian; Lödding, Hermann; Metzmacher, Paul; Fölsch, Jannek
  Product-specific and early-staged determination of production space needs
  WT Werkstattstechnik 114 (6): 298-306 (2024)
  Open Access | Publisher DOI
• Heiden, Bernhard; Tonino-Heiden, Bianca; Singerl, Sabrina; Alieksieiev, Volodymyr
  Production portfolio theory : risk evaluation and a new Industrial application (IA)
  Future of Information and Communication Conference, FICC 2024
  Publisher DOI
• Piontek, Simon; Schibsdat, Sebastian; Dege, Jan Hendrik; Lödding, Hermann
  Smarte Handwerkzeuge und Digitale Assistenzsysteme
  Unter Span: 30-31 (2024)
  
• Flehmke, Malte; Schibsdat, Sebastian
  Smartes Bohren
  CU Reports: 78 (1): 1-78 (2024)
  
• Heiden, Bernhard; Pacnik, Danijel; Pregl, Jessica; Müller, Maximilian; Leitner, Simone; Alieksieiev, Volodymyr; Tonino-Heiden, Bianca
  Tile quality detection device : Internet of Things (IoT) demonstration prototype
  9th International Conference on Internet of Things, Big Data and Security, IoTBDS 2024
  Open Access | Publisher DOI

2023

• Junghans, Sebastian; Flehmke, Malte; Stützle, Joshua; Möller, Carsten; Dege, Jan Hendrik
  Enhancing Tool Replacement Decisions in Milling of Ti-6Al-4V Using Convolutional Neural Networks and Time-series-to-image Encoding
  Research Paper Series, SSRN (2023-11-29)
  Publisher DOI
• Fulterer, Judith; Kuhn, Calvin; Maetschke, Jan; Kalchschmid, Vincent; Karg, Florian; Luber, Mario; Demke, Tabea Marie; Hiller, Tobias; Kämpfer, Tim; Steffens, Constantin; Mundt, Christopher; Alieksieiev, Volodymyr
  PPS-Report 2023: Studienergebnisse
  PPS-Report, Werkzeugmaschinenlabor WZL der RWTH Aachen University (2023)
  Open Access | Publisher DOI
• Evers, Lasse; Blühm, Melchior Frieder; Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  Characterization of the surface error during peripheral milling of thin-walled, near-net-shaped structures
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Publisher DOI
• Flehmke, Malte; Junghans, Sebastian; Jessen, Andreas; Shchegel, Ganna; Möller, Carsten; Dege, Jan Hendrik
  Improving Efficiency and Sustainability Through Predictive Tool Wear Monitoring During Manual Drilling of CFRP
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Publisher DOI
• Junghans, Sebastian; Romanenko, Denys; Hintze, Wolfgang
  Nutzung von Methoden des Maschinellen Lernens für die Werkstückqualität- und Werkzeugverschleißüberwachung bei semi-automatischen Bohrprozessen
  72. Deutscher Luft- und Raumfahrtkongress (DLRK 2023)
  Publisher DOI
• Geier, Norbert; Xu, Jinyang; Poór, Dániel István; Dege, Jan Hendrik; Davim, João Paulo
  A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites
  Composites Part B: Engineering 266: 111037 (2023-11)
  Open Access | Publisher DOI
• Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  ML-Modelle für den intelligenten Werkzeugwechsel
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (11): 752-757 (2023-11)
  Publisher DOI
• Evers, Lasse; Müller, Matthias; Möller, Carsten; Dege, Jan Hendrik
  Dimensional Error Compensation during Finish Milling
  Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (10): 688-692 (2023-10-19)
  Publisher DOI
• Jeong, Yongkuk; Flores-garcía Erik; Piontek, Simon; Wiktorsson, Magnus
  Implementing transmission of data for digital twins in human-centered cyber-physical systems
  Procedia CIRP 120: 992-997 (2023-10)
  Open Access | Publisher DOI
• Jansen, Tim Maximilian; Karl, Oliver; Elzalabany, Ahmed; Lödding, Hermann
  Streamlining the execution of maritime commissioning with a digital assistance system
  International Conference on Advances in Production Management Systems (APMS 2023)
  Publisher DOI
• Grafelmann, Michaela; Alieksieiev, Volodymyr; Lödding, Hermann; Jahn, Carlos
  Logistics Objective conflicts at intermodal terminals
  20. ASIM-Fachtagung Simulation in Produktion und Logistik (2023)
  Publisher DOI
• Köster, Nina; Mundt, Christopher; Lödding, Hermann
  Planning and Control of Maritime Commissioning
  International Conference on Advances in Production Management Systems (APMS 2023)
  Publisher DOI
• Hinrichs, Marco; Dege, Jan Hendrik; Schleinkofer, Uwe; Venturini, Remus
  Novel tuned mass damper mitigating chatter vibrations of slender boring bars with small diameter
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (7-8): 476-480 (2023-08-14)
  Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina; Dege, Jan Hendrik; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Oxidation and wear behavior of CrAlMoN with varied Mo-content for cutting Ti6Al4V
  Production Engineering 18: 87-97 (2024)
  Open Access | Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlMoN high performance tool coatings for machining of TiAl6V4
  Production Engineering 17 (3-4): 437-444 (2023-06)
  Open Access | Publisher DOI
• Flehmke, Malte; Romanenko, Denys; Rosenthal, Oliver; Dege, Jan Hendrik
  Klassifizierung von Prozesszuständen beim Bohren
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (5): 302-306 (2023)
  Publisher DOI
• Jahn, Niklas; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Störungsmanagement mit digitalen Assistenzsystemen : ein generischer Ansatz für den Produktlebenszyklus
  Industrie 4.0 Management 39 (2): 15-19 (2023)
  
• Koch, Philip; Rawal, Parth; Töpfer, Nico; Haß, Tim; Böhlmann, Christian; Hintze, Wolfgang
  Modular lightweight robot system for aircraft production using a generic OPC UA skill concept
  Production Engineering 17: 329-339 (2023-03-15)
  Open Access | Publisher DOI
• Giskeødegård, Marte Fanneløb; Kjersem, Kristina; Jahn, Niklas; Rost, Robert
  Tool or hassle? - Production workers evaluation of the potential of digital assistance systems on the shopfloor in shipbuilding projects
  Cogent Engineering 10 (1): 2161763 (2023-01)
  Open Access | Publisher DOI
• Steenwerth, Philipp
  Analyse und Optimierung von Suchvorgängen in der industriellen Produktion
  Wissen schafft Innovation 50: (2024)
  Open Access
• Brouschkin, Alexander; Dege, Jan Hendrik; Hintze, Wolfgang
  CFK-Zerspanen für alle : Verfahrensunabhängiges Kraft- und Oberflächenmodell beim Zerspanen von CFK mit definierter Schneide
  CU reports (2): 59 (2023)
  
• Piontek, Simon; Schütze, Mats; Lödding, Hermann
  Digital assistance for aircraft manufacturing – process requirements and technologies
  Procedia CIRP 120: 105–110 (2023)
  Open Access | Publisher DOI
• Rost, Jan Robert
  Digitale Assistenzsysteme für kollaboratives Arbeiten in der Unikatproduktion
  Wissen schafft Innovation 49: (2023)
  Open Access
• Flehmke, Malte; Dege, Jan Hendrik
  Manuelles Bohren bei der Montage von Flugzeugstrukturen : neue Technologien und Herausforderungen im Fokus
  Unter Span 2023: 28-29 (2023)
  
• Hintze, Wolfgang; Hinrichs, Marco; Rosenthal, Oliver; Schleinkofer, Uwe; Venturini, Remus
  Model based design of tuned mass dampers for boring bars of small diameter
  19th CIRP Conference on Modeling of Machining Operations - Procedia CIRP 117: 193-198 (2023)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Brouschkin, Alexander; Köttner, Lars; Blühm, Melchior Frieder
  Model based prediction of force and roughness extrema inherent in machining of fibre reinforced plastics using data merging
  12th Congress of the German Academic Association for Production Technology (WGP 2022)
  Publisher DOI
• Mehnen, Jan Philipp
  Modellgestützte Berechnung der thermischen Belastung bei der Zerspanung von unidirektionalem CFK
  Wissen schafft Innovation 52: (2023)
  Open Access
• Brosche, Justus
  Nutzung von Motion-Capture-Technologien zur individuellen Ergonomieanalyse in der Produktion
  Wissen schafft Innovation 51: (2023)
  Open Access
• Evers, Lasse; Blühm, Melchior Frieder; Wollenhaupt, Jan; Dege, Jan Hendrik
  Robotergeführte spanende Nachbearbeitung additiv hergestellter Großbauteile
  Unter Span: 26-27 (2023)
  
• Muth, M.; Carstensen, P.; Hintze, Wolfgang; Gnadt, S.; Brillinger, Christoph; Möller, Christian; Böhlmann, Christian
  Sensor-guided machining of large-scale CFRP components based on resin transfer molded features
  Optical Measurement Systems for Industrial Inspection XIII (2023)
  Publisher DOI
• Kovalenko, Valentyn; Volodymyr, Rubashka; Alieksieiev, Volodymyr; Heiden, Bernhard
  Stability analysis of dismountable pallet racks
  Lecture Notes in Networks and Systems 762: 1-16 (2023)
  Publisher DOI
• Rawal, Parth; Sompura, Mrunal; Hintze, Wolfgang
  Synthetic data generation for bridging Sim2Real gap in a production environment
  arXiv: 2311.11039 (2023)
  Open Access | Publisher DOI

2022

• Rana, Pulkit; Hintze, Wolfgang; Schall, T.; Polley, W.
  Implementation of MC-SPG particle method in the simulation of orthogonal turning process
  12th Congress of the German Academic Association for Production Technology (WGP 2022)
  
• Friedewald, Axel; Rost, Robert; Meluzov, Nikolaj; Lödding, Hermann; Knödler, Tobias; Peschke, Jörg; Dombrowski, Tobias
  Wartung und Service von Schiffen mit erweiterter Realität
  Schiff & Hafen : Fachzeitschrift für Schifffahrt, Schiffbau & Offshore-Technologie 74 (5): (2022)
  
• Elzalabany, Ahmed Mohamed Abdelmeguid; Settler, Vincent; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Automated generation and low-effort authoring of commissioning content in the maritime industry
  International Conference on Computer Applications in Shipbuilding - ICCAS 2022
  Publisher DOI
• Mundt, Christopher; Beck, Eilis Bernadette; Lödding, Hermann
  Determining due dates for rush orders
  International Conference on Advances in Production Management Systems (APMS 2022)
  Publisher DOI
• Romanenko, Denys; Jothi Prakash, Vishnuu; Kuhn, Tobias; Möller, Carsten; Hintze, Wolfgang; Emmelmann, Claus
  Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining
  Procedia CIRP 111: 271-276 (2022)
  Open Access | Publisher DOI
• Piontek, Simon; Lödding, Hermann
  User-Centric Digital Assistance with Smart Tools for Manual Assembly Processes
  International Conference on Advances in Production Management Systems (APMS 2022)
  Publisher DOI
• Maetschke, Jan; Fulterer, Judith; Janke, Tim; Zipfel, Alexander; Bank, Lukas; Theumer, Philipp; Mundt, Christopher; Köster, Nina; Kämpfer, Tim; Heuer, Tammo; Hiller, Tobias
  PPS-Report 2021
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (6): 400-404 (2022)
  Publisher DOI
• Elzalabany, Ahmed Mohamed Abdelmeguid; Settler, Vincent; Rost, Robert; Lödding, Hermann
  Digitalization of maritime commissioning : a system for automatic content creation and augmented reality-based commissioning execution
  21st International Conference on Computer and IT Applications in the Maritime Industries (COMPIT 2022)
  
• Hamann, Tobias; Hansen, Stephan; Bitterolf, David; Böhlmann, Christian; Möller, Christian; Seifried, Robert; Hintze, Wolfgang
  Experimental analysis of a hybrid drive train implemented in a novel industrial robot approach
  54th International Symposium on Robotics (ISR Europe 2022) : (München) : 2022.06.20-21. - [Berlin ; Offenbach] : VDE Verlag GmbH, 2022. - Seite 142-149
  
• Hintze, Wolfgang; Romanenko, Denys; Molkentin, Lukas; Köttner, Lars; Mehnen, Jan Philipp
  Holistic process monitoring with machine learning classification methods using internal machine sensors for semi-automatic drilling
  Procedia CIRPs 107: 972-977 (2022)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Hinrichs, Marco; Rosenthal, Oliver; Schleinkofer, Uwe; Venturini, Remus
  Tuned mass dampers for boring bars with small diameter
  20th Plansee Seminar: Artikelnummer HM 9 (2022)
  
• Breitzke, André; Hintze, Wolfgang
  Workshop-suited geometric errors identification of three-axis machine tools using on-machine measurement for long term precision assurance
  Precision Engineering 75: 235-247 (2022-05)
  Publisher DOI
• Brillinger, Christoph; Kallipalayam Murugesan, Satheesh Kumar; Möller, Christian; Böhlmann, Christian; Hintze, Wolfgang; Niermann, Dirk
  Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CRFP Components (SAE Paper 2022-01-0041)
  SAE International AeroTech (AEROTECH 2022)
  Publisher DOI
• Brillinger, Christoph; Kallipalayam Murugesan, Satheesh Kumar; Möller, Christian; Böhlmann, Christian; Hintze, Wolfgang; Niermann, Dirk
  Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CFRP Components
  SAE International AeroTech (AEROTECH 2022)
  Publisher DOI
• Hintze, Wolfgang; Köttner, Lars; Brouschkin, Alexander; Blühm, Melchior Frieder; Jakele, Lukas
  A General Unique Description of Cutting Direction and Engagement for Arbitrary Oblique Cutting of Orthotropic Materials – Modeling and Validation for Grinding of Unidirectional CFRP
  CIRP Winter Meetings, STC C - Cutting (2022)
  
• Lissek, Fabian; Kaufeld, Michael; Bergmann, Jean Pierre; Hintze, Wolfgang
  Eine Frage des Timings : schädigungsfreies Bohren nachgiebiger CFK-Strukturen
  Werkstatt + Betrieb (): 358589 (17-02-2022)
  
• Jahn, Niklas; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Disruption management in one-off production with collaborative digital assistance systems : benefits of an integrative approach with a generic data model
  WGAB-Forschungsseminar (2022)
  Open Access | Publisher DOI
• Brosche, Justus; Lödding, Hermann; Wackerle, H.; Augat, Peter
  Ein Lernassistenzsystem zur Verbesserung der Ergonomie
  Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 2: (2022)
  
• Hintze, Wolfgang; Möller, Carsten; Ploog, Petter; Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina
  Influence of self-lubricating tool coatings on cutting temperature and coefficient of friction during turning of Ti6Al4V
  20th Plansee Seminar (2022)
  
• Meluzov, Nikolaj
  Informationsmanagement für ein digitales Instandhaltungsassistenzsystem
  Wissen schafft Innovation 48: (2022)
  Open Access
• Engehausen, Friederike; Lödding, Hermann
  Managing sequence-dependent setup times - The target conflict between output rate, WIP and fluctuating throughput times for setup cycles
  Production Planning and Control 33 (1): 84-100 (2022)
  Publisher DOI
• Surmann, Tobias; Lange, Matthias; Dege, Jan Hendrik
  Milling of titanium aerostructures using solid cemented carbide tools – Evaluation and modelling of tool wear
  WT Werkstattstechnik 112 (1-2) : 73-78 (2022)
  Publisher DOI
• Steenwerth, Philipp; Lödding, Hermann
  Sensorgestützte Analyse der Maschinenbedienung in der Kleinserienfertigung
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (12): 813-819 (2022)
  Publisher DOI
• Rana, Pulkit; Hintze, Wolfgang; Schall, T.; Polley, W.
  Study on the Influence of the Coating Thickness in Turning of a Hard to Machine Material Using FEM-Simulation
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI

2021

• Bobzin, Kirsten; Brögelmann, Tobias; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlVN coatings for turning of Ti6Al4V: oxidation and wear behavior
  Materialwissenschaft und Werkstofftechnik 52 (12): 1394-1412 (2021-12)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Köttner, Lars
  Curved circular cutting of lightweight structures
  China-Germany-Japan Workshop on Advanced Manufacturing of New Energy Vehicles (2021)
  
• Bank, Lukas; Luber, Mario; Theumer, Philipp; Zipfel, Alexander; Kämpfer, Tim; Hiller, Tobias; Heuer, Tammo; Demke, Tabea Marie; Mundt, Christopher; Köster, Nina; Janke, Tim; Maibaum, Judith; Schmidthuber, Matthias
  PPS-Report 2021 : Studienergebnisse
  PPS-Report 4 : (2022)
  Open Access | Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Wear development of self-lubricating CrAlVN coatings during turning Ti6Al4V
  SSRN eLibrary: 70-77 (2021)
  Open Access | Publisher DOI
• Mehnen, Jan Philipp; Hintze, Wolfgang; Köppe, Marek
  Influence of contour radius and fiber orientation on heat accumulation during machining of unidirectional CFRP
  MM Science Journal 2021-November (5): 5085-5092 (2021-11-01)
  Publisher DOI
• Winter, Michael; Schoop, Bastian; Lödding, Hermann
  Produktionskennlinien mit Belastungsflexibilität Wie Flexibilität Bestandseinsparungen ermöglicht
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 116 (11): 762-765 (2021-11)
  Publisher DOI
• Möller, Carsten; Hintze, Wolfgang; Wenserski, Robert von
  Impact separation of support structures from laser powder bed fusion generated LPBF parts
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI
• Schulze, Benjamin; Rawal, Parth; Kothe, Simon M.; Hintze, Wolfgang
  Subsequent synchronization of individual monitoring systems for machining of aircraft structures via a data collector using OPC UA
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI
• Rost, Robert; Friedewald, Axel
  Consistent Maintenance Order Processing with Digital Assistance Systems
  International Conference on Advances in Production Management Systems (APMS 2021)
  Publisher DOI
• Production at the leading edge of technology
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  
• Engehausen, Friederike
  Modellierung und Auslegung der Reihenfolgebildung mit Rüstfamilien
  Wissen schafft Innovation 44: (2021)
  Open Access
• Rost, Robert
  Digitale Assistenzsysteme in der Industrie : Visualisierungskonzept
  Technische Universität Hamburg (2021)
  Open Access
• Mehnen, Jan Philipp; Hintze, Wolfgang
  Prozessüberwachung durch Machine Learning beim semi-automatischen Nietbohren in der Luftfahrtindustrie
  METAV-Digital (2021)
  
• Hintze, Wolfgang; Rosenthal, Oliver; Hinrichs, Marco; Steinbach, Stefan
  Zerspanung von gesintertem Hartmetall : Grundlagen und Anwendung
  Hanser Tagungen "Schwer zerspanbare Werkstoffe in der industriellen Praxis" (2021)
  
• Hintze, Wolfgang; Möller, Carsten; Romanenko, Denys; Junghans, Sebastian
  Adaptive Präzisionsbearbeitung additiv gefertigter Leichtbaustrukturen in der digitalisierten Prozesskette
  Unter Span: 42-43 (2021)
  
• Kothe, Simon M.; Diehl, B.; Niermann, Dirk; Chen, L.; Wolf, M.; Hintze, Wolfgang
  Automated Assembly of Thermoplastic Fuselage Structures for Future Aircrafts
  Congress of the German Academic Association for Production Technology (WGP 2020)
  Publisher DOI
• Hintze, Wolfgang; Mehnen, Jan Philipp; Köttner, Lars; Romanenko, Denys
  Bohrprozess im Griff : halbautomatisches Bohren wird jetzt mit KI überwachbar
  Maschinenmarkt : a-1048320 (2021)
  
• Hintze, Wolfgang
  CFK-Bearbeitung
  Springer-Verlag (2021)
  Publisher DOI
• Sikorra, Jan Niklas
  Frühzeitige Aufwands- und Terminschätzung der schiffbaulichen Unikatproduktion
  Wissen schafft Innovation 45: (2021)
  
• Wenserski, Robert von
  Helixfräsen und Bohren von laseradditiv gefertigten Bauteilen aus Titan für Luftfahrtanwendungen
  Wissen schafft Innovation 47: (2021)
  Open Access
• Schröder, Henrik
  Kompetenzentwicklung in der Montage mit Hilfe virtueller Technologien
  Wissen schafft Innovation 43: (2021)
  
• Haux, Moritz Alexander
  Modellierung von Unsicherheiten in der Planung der Unikatproduktion
  Wissen schafft Innovation 46: (2021)
  Open Access
• Winter, Michael; Luttkau, Alexander; Lödding, Hermann
  Produktionskennlinien mit Kapazitätsflexibilität
  WT Werkstattstechnik 111 (4): 190-194 (2021)
  Publisher DOI
• Friedewald, Axel; Köster, Nina; Elzalabany, Ahmed Mohamed Abdelmeguid
  Scheduling and visualization of acceptance tests and their dependencies for an augmented reality-based commissioning assistance system
  20th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT 2021)
  
• Lödding, Hermann; Koch, Christoph
  Value stream analysis and design for make-to-order companies
  Production Planning and Control 4 (32): 322-334 (2021)
  Publisher DOI
• Friedewald, Axel; Rost, Robert; Meluzov, Nikolaj; Lödding, Hermann
  WASSER - Wartung und Service von Schiffen mit erweiterter Realität
  Jülich (2021)