2025

• Application of machine learning in predicting quality parameters in Metal Material Extrusion (MEX/M) - Journal Article
  Asami, Karim; Kuehne, Maxim; Röver, Tim; Emmelmann, Claus
  Metals 15 (5): 505 (2025)
  Open Access | Publisher DOI
• On resource efficient and individualized tree support structures for PBF-LB/M by process simulation - Conference Proceedings
  Michael, Jochen; Emmelmann, Claus; Hünting, Jan; Röver, Tim
  7th Fraunhofer Direct Digital Manufacturing Conference, DDMC 2025
  Open Access
• Exploring the influence of PBF-LB/M process parameters in multi-material AM: a single-track study on CuCrZr deposited onto IN718 substrate - Journal Article
  Crego Lozares, Jose Manuel; Medvedev, Alexander; Asami, Mohammad Karim; Molotnikov, Andrey; Emmelmann, Claus; Brandt, Milan
  Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 72: S91-S97 (2025)
  Open Access | Publisher DOI
• Methodology for cost estimation using characteristic factors in additive manufacturing - Journal Article
  Asami, Mohammad Karim; Herzog, Dirk; Deutschmann, Torben; Röver, Tim; Kelbassa, Ingomar; Emmelmann, Claus
  Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 72: S75 - S82 (2025)
  Open Access | Publisher DOI
• Novel lightweight design of additively manufactured structural components through biomimetics - Journal Article
  Röver, Tim; Sievers, Tjark; Asami, Mohammad Karim; Emmelmann, Claus
  Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 72: S1241-S1248 (2025)
  Open Access | Publisher DOI
• Additive manufacturing of ceramics via the laser powderbed fusion process - Review Article
  Ullah, Abid; Shah, Mussadiq; Ali , Zulfiqar; Asami, Mohammad Karim; Rehmann, Asif Ur; Emmelmann, Claus
  International journal of applied ceramic technology: e15087 (2025)
  Open Access | Publisher DOI
• Investigation on curing strategies for metal binder jetting with Ti-6Al-4V - Journal Article
  Janzen, Kevin; Rieß, Timo; Emmelmann, Claus
  Additive Manufacturing Letters: 100272 (2025)
  Open Access | Publisher DOI

2024

• Comparative analysis of laser power, pure titanium, and titanium alloy effects on dendrite growth and surface morphology of TiO2-ceramic - Journal Article
  Ullah, Abid; Asami, Mohammad Karim; Azher, Kashif; Emmelmann, Claus
  Journal of Laser Applications 36 (4): 042061 (2024)
  Open Access | Publisher DOI
• A machine learning approach for mechanical component design based on topology optimization considering the restrictions of additive manufacturing - Journal Article
  Ullah, Abid; Asami, Mohammad Karim; Holtz, Lukas; Röver, Tim; Azher, Kashif; Bartsch, Katharina; Emmelmann, Claus
  Journal of Manufacturing and Materials Processing 8 (5): 220 (2024)
  Open Access | Publisher DOI
• Dimensioning of biomimetic beams under bending for additively manufactured structural components - Journal Article
  Röver, Tim; Fuchs, Cedrik; Asami, Mohammad Karim; Emmelmann, Claus
  Biomimetics 9 (4): 214 (2024)
  Open Access | Publisher DOI
• Material extrusion of metals: Enabling multi-material alloys in additive manufacturing - Journal Article
  Asami, Mohammad Karim; Crego Lozares, Jose Manuel; Ullah, Abid; Bossen, Bastian; Clague, Leighton Shane; Emmelmann, Claus
  Materials Today Communications 38: 107889 (2024)
  Open Access | Publisher DOI
• Influence of different powder conditioning strategies on metal binder jetting with Ti-6Al-4V - Journal Article
  Janzen, Kevin; Kallies, Kim Julia; Waalkes, Lennart; Imgrund, Philipp; Emmelmann, Claus
  Materials 17 (3): 750 (2024)
  Open Access | Publisher DOI
• Recycling of Ti-6Al-4V Powder in Metal Binder Jetting - Conference Paper
  Janzen, Kevin; Kallies, Kim Julia; Waalkes, Lennart; Imgrund, Philipp; Emmelmann, Claus
  World PM2024 International Powder Metallurgy Congress & Exhibition
  

2023

• Development and assessment of a methodology for abstraction of topology optimization results to enable the substitution of optimized beams - Journal Article
  Röver, Tim; Bader, Maximilian; Asami, Mohammad Karim; Emmelmann, Claus; Kelbassa, Ingomar
  Journal of Laser Applications 35: 042061 (2023-11-03)
  Open Access | Publisher DOI
• Design and numerical assessment of an additively manufactured Schwarz diamond triply periodic minimal surface fluid-fluid heat exchanger - Journal Article
  Röver, Tim; Kuehne, Maxim; Bischop, Floyd; Clague, Leighton; Bossen, Bastian; Emmelmann, Claus
  Journal of Laser Applications 35 (4): 042071 (2023)
  Open Access | Publisher DOI
• Design optimization of additively manufactured components using simulation-based analysis of infill structures - Conference Paper
  Asami, Karim; Roth, Sebastian; Krukenberg, Michel; Emmelmann, Claus
  ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023)
  Open Access | Publisher DOI
• Part and process qualification for serial production - Book part
  Emmelmann, Claus; Daniel, Christian
  in: Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M., Sun, T. (eds) Handbook of Additive Manufacturing. Springer (2023)
  Publisher DOI
• Predictive modeling of lattice structure design for 316L stainless steel using machine learning in the L-PBF process - Journal Article
  Asami, Mohammad Karim; Roth, Sebastian; Röver, Tim; Herzog, Dirk; Emmelmann, Claus; Krukenberg, Michel
  Journal of Laser Applications 35 (4): 042046 (2023-10-13)
  Open Access
• Data-driven density prediction of AlSi10Mg parts produced by laser powder bed fusion using machine learning and finite element simulation - Journal Article
  Bossen, Bastian; Kuehne, Maxim; Kristanovski, Oleg; Emmelmann, Claus
  Journal of Laser Applications 35 (4): 042023 (2023-09-26)
  Open Access | Publisher DOI
• Entfernbarkeit von Stützstrukturen im pulverbettbasierten Laserstrahlschmelzen von Ti-6Al-4V - Conference Paper
  Maiwald, Maria Isabelle; Bartsch, Katharina; Röver, Tim; Emmelmann, Claus
  19th Rapid.Tech 3D Conference (2023-05)
  Publisher DOI
• Predicting melt track geometry and part density in laser powder bed fusion of metals using machine learning - Journal Article
  Kuehne, Maxim; Bartsch, Katharina; Bossen, Bastian; Emmelmann, Claus
  Progress in Additive Manufacturing 8: 47-54 (2023-01-09)
  Open Access | Publisher DOI
• Bäume als Stützstrukturen im 3-D-Druck - Journal Article
  Hünting, Jan; Michael, Jochen; Röver, Tim; Emmelmann, Claus
  Maschinenbau 6: (2023)
  Publisher DOI
• Development of a tree-support software module for PBF-LB/M - Conference Paper
  Hünting, Jan; Crego Lozares, Jose Manuel; Maiwald, Maria Isabelle; Michael, Jochen; Emmelmann, Claus; Röver, Tim
  Lasers in Manufacturing Conference (2023)
  
• Tree Support Structures in Additive Manufacturing – Efficiency Improvement in 3D Printing and Subtractive Post Processing of Complex Metal Components - Journal Article
  Hünting, Jan; Waldschmidt, Johannes; Michael, Jochen; Dias da Silva, Marcel; Emmelmann, Claus; Röver, Tim
  Zeitschrift für Wirtschaftlichen Fabrikbetrieb 118 (11): 773-777 (2023)
  Publisher DOI

2022

• Design Guidelines For Green Parts Manufactured With Stainless Steel In The Filament Based Material Extrusion Process For Metals (MEX/M) - Conference Paper
  Asami, Mohammad Karim; Herzog, Dirk; Bossen, Bastian; Geyer, Leon; Klemp, Clarissa; Emmelmann, Claus
  World PM2022 Congress & Exhibition
  Open Access
• Methodology for integrating biomimetic beams in abstracted topology optimization results - Conference Paper
  Röver, Tim; Lau, Robert Johannes; Lange, Fritz; Struve, Arnd; Fuchs, Cedrik; Bartsch, Katharina; Seibel, Arthur; Emmelmann, Claus
  ASME International Mechanical Engineering Congress and Exposition (IMECE 2022)
  Open Access | Publisher DOI
• Potentials of Metal Binder Jetting Process Chains for Medical Parts - Conference Paper
  Janzen, Kevin; Groß, Patricia; Imgrund, Philipp; Emmelmann, Claus
  World PM2022 Congress & Exhibition
  
• Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining - Journal Article
  Romanenko, Denys; Jothi Prakash, Vishnuu; Kuhn, Tobias; Möller, Carsten; Hintze, Wolfgang; Emmelmann, Claus
  Procedia CIRP 111: 271-276 (2022)
  Open Access | Publisher DOI
• Signal processing of airborne acoustic emissions from laser metal deposited structures - Journal Article
  Weber, Julian Ulrich; Knabe, Michael; Sayilgan, Vurgun; Emmelmann, Claus
  Procedia CIRP 111: 359-362 (2022)
  Open Access | Publisher DOI
• Strain hardening behavior of additively manufactured and annealed AlSi3.5Mg2.5 alloy - Journal Article
  Zhang, X. X.; Lutz, Andreas; Andrä, Heiko; Lahres, Michael; Gong, W.; Harjo, S.; Emmelmann, Claus
  Journal of Alloys and Compounds 898: 162890 (2022-03-25)
  Open Access | Publisher DOI
• Enabling cost-based support structure optimization in laser powder bed fusion of metals - Journal Article
  Bartsch, Katharina; Emmelmann, Claus
  JOM 74 (3): 1126-1135 (2022-03)
  Open Access | Publisher DOI
• Design guidelines for laser powder bed fusion in Inconel 718 - Journal Article
  Herzog, Dirk; Asami, Mohammad Karim; Scholl, Christoph; Ohle, Christoph; Emmelmann, Claus; Sharma, Ashish N.; Markovic, Nick; Harris, Andy
  Journal of Laser Applications 34 (1): 012015 (2022-02-01)
  Open Access | Publisher DOI
• Piston-based material extrusion of Ti-6Al-4V feedstock for complementary use in metal injection molding - Journal Article
  Waalkes, Lennart; Längerich, Jan; Imgrund, Philipp; Emmelmann, Claus
  Materials 15 (1): 351 (2022)
  Open Access | Publisher DOI

2021

• Stereo camera based in-situ monitoring of L-PBF process stability by spatter detection - Conference Paper
  Brummerloh, Daniel Lukas; Jutkuhn, Dennis; Yang, Zheng; Penn, Alexander; Emmelmann, Claus
  Advancing Precision in Additive Manufacturing (2021)
  
• Comparison of iPad Pro’s LiDAR and TrueDepth capabilities with an industrial 3D scanning solution - Journal Article
  Vogt, Maximilian; Rips, Adrian; Emmelmann, Claus
  Technologies 9 (2): 25 (2021)
  Open Access | Publisher DOI
• Material modeling of Ti–6Al–4V alloy processed by laser powder bed fusion for application in macro-scale process simulation - Journal Article
  Bartsch, Katharina; Herzog, Dirk; Bossen, Bastian; Emmelmann, Claus
  Materials Science and Engineering A 814: 141237 (2021-05-13)
  Open Access | Publisher DOI
• Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy - Journal Article
  Zhang, X. X.; Lutz, Andreas; Andrä, Heiko; Lahres, Michael; Gan, Weimin; Maawad, Emad; Emmelmann, Claus
  International Journal of Plasticity 139: 102946 (2021-04)
  Publisher DOI
• Effect of heat accumulation on the single track formation during laser metal deposition and development of a framework for analyzing new process strategies - Journal Article
  Heilemann, Markus; Jothi Prakash, Vishnuu; Beulting, Lorenz; Emmelmann, Claus
  Journal of Laser Applications 33 (1): 0000307 (2021-02-01)
  Publisher DOI
• Digitalization of directed energy deposition process through a multidirectional height monitoring sensor system - Journal Article
  Jothi Prakash, Vishnuu; Buhr, Malte; Emmelmann, Claus
  Journal of Laser Applications 1 (33): 012044 (2021-01-22)
  Open Access | Publisher DOI
• Investigations of air atomized and coarser gas-atomized AlSi12 powders to evaluate cost reduction potentials for additive manufacturing processes - Conference Paper
  Ludwig, Ina; Kluge, Maximilian; Jutkuhn, Dennis; Grube, Marten; Imgrund, Philipp; Emmelmann, Claus
  Developing the powder metallurgy future : Euro PM 2021 Virtual Congress & Exhibiton : proceedings : 18-22 October 2021, online / EPMA, European Powder Metallurgy Association. - 2021.
  

2020

• Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock - Journal Article
  Waalkes, Lennart; Längerich, Jan; Holbe, Felix; Emmelmann, Claus
  Additive Manufacturing (35): 101207 (2020-10)
  Publisher DOI
• Focus shift control of a novel 30 kW laser remote scanner for large-scale industrial sheet and plate metal applications - Conference Paper
  Cerwenka, Georg; Paternina, Jully; Elhefnawy, Mohamed; Wollnack, Jörg; Emmelmann, Claus
  Procedia CIRP (94): 817-822 (2020)
  Open Access | Publisher DOI
• Benchmark parts for the evaluation of optimized support structures in Laser Powder Bed Fusion of metals - Journal Article
  Bartsch, Katharina; Ohrenberg, Joost; Emmelmann, Claus
  11th CIRP Conference on Photonic Technologies (LANE 2020)
  Open Access | Publisher DOI
• SMART Reactors: Intelligente additiv gefertigte strukturierte Einbauten zur Optimierung von Gas/Flüssig-Reaktionen - Conference Poster
  Spille, Claas; Hu, Xihua; Maiwald, Maria Isabelle; Herzog, Dirk; Hoffmann, Marko; Emmelmann, Claus; Smirnova, Irina; Schlüter, Michael
  Chemie - Ingenieur - Technik 92 (9): 1328 (2020-08-28)
  Publisher DOI
• SMART-Reactors : tailoring gas holdup distribution by additively manufactured lattice structures - Journal Article
  Spille, Claas; Lyberis, Anastasios; Maiwald, Maria Isabelle; Herzog, Dirk; Hoffmann, Marko; Emmelmann, Claus; Schlüter, Michael
  Chemical Engineering and Technology 10 (43): 2053-2061 (2020)
  Open Access | Publisher DOI
• Influence of laser beam profile on the selective laser melting process of AlSi10Mg - Journal Article
  Wischeropp, Tim Marten; Tarhini, Hussein; Emmelmann, Claus
  Journal of Laser Applications 32 (2): 022059 (2020-05-01)
  Publisher DOI
• Biomimetic design and laser additive manufacturing - A perfect symbiosis? - Journal Article
  Gralow, Melanie; Weigand, Felix; Herzog, Dirk; Wischeropp, Tim Marten; Emmelmann, Claus
  Journal of Laser Applications 2 (32): 021201 (2020)
  Open Access | Publisher DOI

2019

• A novel approach to avoid internal support structures in fluid flow optimization for additive manufacturing - Conference Paper
  Lange, Fritz; Shinde, Anshuman S.; Bartsch, Katharina; Emmelmann, Claus
  NAFEMS World Congress, 17.-20.06.2019, Quebec City, Canada (2019)
  
• 3D/6D calibration and real-time focus shift compensation for automated 30 kW laser remote scanner - Journal Article
  Cerwenka, Georg; Wollnack, Jörg; Krähling, Thomas; Jayaprakash, Rekha; Emmelmann, Claus
  Journal of Laser Applications 2 (31): 022607 (2019-05-01)
  Publisher DOI
• Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization - Journal Article
  Bartsch, Katharina; Lange, Fritz; Gralow, Melanie; Emmelmann, Claus
  Journal of Laser Applications 2 (31): 022302- (2019-05-01)
  Publisher DOI
• Selbstorganisiertes Lernen als Vorbereitung für das lebenslange Lernen im Lehrberuf - Conference Paper
  Daniel, Christian; Bartsch, Katharina; Emmelmann, Claus
  Ingenieurpädagogische Regionaltagung, 23.-25.05.2019, Bremen (2019)
  
• Laser Beam Melting of Large-Scale Ti-6Al-4V Parts - Increasing Productivity and Reducing Residual Stresses - Conference Presentation
  Herzog, Dirk; Bartsch, Katharina; Bossen, Bastian; Schenk, Kerstin; Emmelmann, Claus
  MRS Spring Meeting, Phoenix, USA (2019)
  

2018

• Organization of post-processing processes in additive manufacturing structures - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 11 (113): 738-741 (2018-11)
  Publisher DOI
• Laser metal deposition of titanium parts with increased productivity - Book Part
  Jothi Prakash, Vishnuu; Möller, Mauritz; Weber, Julian; Emmelmann, Claus
  3D Printing and Additive Manufacturing Technologies : 297-311 (2018-08-02)
  Publisher DOI
• In-depth characterization of the scanner-based selective laser deburring process - Journal Article
  Cerwenka, Georg; Surrey, Philipp; Möller, Mauritz; Conrad, Christian; Jothi Prakash, Vishnuu; Heilemann, Markus; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032510- (2018-08-01)
  Publisher DOI
• Optimization of laser-remote-cutting of CFRP by means of variable exposure delay times - Simulation and validation - Journal Article
  Oberlander, Max; Canisius, Marten; Hergoss, Philipp; Bartsch, Katharina; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032204- (2018-08-01)
  Publisher DOI
• Quality target-based control of geometrical accuracy and residual stresses in laser metal deposition - Journal Article
  Möller, Mauritz; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032303- (2018-08-01)
  Publisher DOI
• Automated process planning and production control for additive manufacturing - Journal Article
  Emmelmann, Claus; Rudolph, Jan-Peer; Güntzer, Felix; Zühlke, Sandra
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 6 (113): 398-401 (2018-06)
  Publisher DOI
• Self-learning calculation for selective laser melting - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (67): 185-190 (2018)
  Open Access | Publisher DOI
• How powder characteristics influence: The part properties of laser beam melted titanium - Journal Article
  Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus
  LIA Today 1 (26): 10-12 (2018-01)
  
• Additive Manufacturing: Printing the future of particle-foam processing - Journal Article
  Schütz, Johannes; Beck, Jonas; Schmiedeck, Marcus; Emmelmann, Claus
  Kunststoffe International 8 (108): 32-35 (2018)
  
• From powder to solid: The material evolution of Ti-6Al-4V during laser metal deposition - Conference Paper
  Surrey, Philipp; Möller, Mauritz; Emmelmann, Claus; Heilemann, Markus; Weber, Julian
  Key Engineering Materials (770 KEM): 135-147 (2018)
  Publisher DOI
• Laser metal deposition of bionic aluminum supports: reduction of the energy input for additive manufacturing of a fuselage - Conference Paper
  Heilemann, Markus; Beckmann, Jaco; Konigorski, Detlev; Emmelmann, Claus
  Procedia CIRP (74): 136-139 (2018)
  Open Access | Publisher DOI
• Post-processing of additively manufactured cutting edges by laser ablation - Conference Paper
  Hallmann, Sina; Wolny, Tim; Emmelmann, Claus
  Procedia CIRP (74): 276-279 (2018)
  Open Access | Publisher DOI

2017

• Development of an adaptive, self-learning control concept for an additive manufacturing process - Journal Article
  Renken, Volker; Albinger, Stephan; Goch, Gert; Neef, Arne; Emmelmann, Claus
  CIRP Journal of Manufacturing Science and Technology (19): 57-61 (2017-11)
  Publisher DOI
• Characterization of the anisotropic properties for laser metal deposited Ti-6Al-4 V - Journal Article
  Möller, Mauritz; Ewald, Ake; Weber, Julian; Heilemann, Markus; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022308 (2017-05-01)
  Publisher DOI
• Process monitoring of laser remote cutting of carbon fiber reinforced plastics by means of reflecting laser radiation - Journal Article
  Oberlander, Max; Bartsch, Katharina; Schulte, C.; Canisius, Marten; Hergoss, Philipp; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022009 (2017-05-01)
  Publisher DOI
• Relationship between powder characteristics and part properties in laser beam melting of Ti-6Al-4V, and implications on quality - Journal Article
  Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022311 - (2017-05-01)
  Publisher DOI
• Analysis of design guidelines for automated order acceptance in additive manufacturing - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (60): 187-192 (2017)
  Open Access | Publisher DOI
• A cloud-based platform for automated order processing in additive Manufacturing - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (63): 412-417
  Open Access | Publisher DOI
• Laser metal deposition of Ti-6Al-4V structures: Analysis of the build height dependent microstructure and mechanical properties - Conference Paper
  Heilemann, Markus; Möller, Mauritz; Emmelmann, Claus; Burkhardt, Irmela; Riekehr, Stefan; Ventzke, Volker; Kashaev, Nikolai; Enz, Josephin
  Materials Science and Technology Conference and Exhibition 2017 (1): 312-320 (2017)
  Publisher DOI

2016

• Laser scored machining of fiber reinforced plastics to prevent delamination - Journal Article
  Hintze, Wolfgang; Cordes, Marcel; Geis, Tobias; Blühm, Melchior Frieder; Emmelmann, Claus; Canisius, Marten
  Procedia Manufacturing (6): 1-8 (2016)
  Open Access | Publisher DOI
• Design for laser additive manufacturing - Book Part
  Emmelmann, Claus; Herzog, Dirk; Kranz, Jannis
  Laser Additive Manufacturing: Materials, Design, Technologies, and Applications: 259-279 (2016)
  Publisher DOI
• Additive manufacturing of metals - Journal Article
  Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus
  Acta Materialia (117) : 371-392 (2016-09-15)
  Publisher DOI
• Laser cutting of carbon fibre reinforced plastics of high thickness - Journal Article
  Herzog, Dirk; Schmidt-Lehr, Matthias; Oberlander, Max; Canisius, Marten; Radek, Markus; Emmelmann, Claus
  Materials and Design (92) : 742-749 (2016-02-15)
  Publisher DOI
• Picosecond laser processing of polycrystalline cubic boron nitride - A method to examine the ablation behavior of a high cubic boron nitride content grade material - Journal Article
  Daniel, Christian; Ostendorf, Sven; Hallmann, Sina; Emmelmann, Claus
  Journal of Laser Applications 1 (28): 012001 (2016-02-01)
  Publisher DOI
• Analysis of residual stress formation in additive manufacturing of Ti-6Al-4V - Conference Paper
  Möller, Mauritz; Herzog, Dirk; Wischeropp, Tim Marten; Emmelmann, Claus; Krywka, Christina; Staron, Peter; Munsch, Maximilian
  Materials Science and Technology Conference and Exhibition 2016 (1): 43-50 (2016)
  
• Evolutionary-based design and control of geometry aims for AMD-manufacturing of Ti-6Al-4V parts - Journal Article
  Möller, Mauritz; Baramsky, Nicolaj; Ewald, Ake; Emmelmann, Claus; Schlattmann, Josef
  Physics Procedia (83): 733-742 (2016-01-01)
  Open Access | Publisher DOI
• IR-thermography for quality prediction in selective laser deburring - Journal Article
  Möller, Mauritz; Conrad, Christian; Haimerl, Walter; Emmelmann, Claus
  Physics Procedia (83): 1261-1270 (2016-01-01)
  Open Access | Publisher DOI
• Influence of an angular hatching exposure strategy on the surface roughness during picosecond laser ablation of hard materials - Journal Article
  Daniel, Christian; Manderla, Jannik; Hallmann, Sina; Emmelmann, Claus
  Physics Procedia (83): 135-146 (2016-01-01)
  Open Access | Publisher DOI
• Influence of process parameters on the quality of aluminium alloy en AW 7075 using Selective Laser Melting (SLM) - Journal Article
  Kaufmann, Niko; Imran, Muhammad; Wischeropp, Tim Marten; Emmelmann, Claus; Siddique, Shafaqat; Walther, Frank
  Physics Procedia (83): 918-926 (2016-01-01)
  Open Access | Publisher DOI

2015

• Computed tomography for characterization of fatigue performance of selective laser melted parts - Journal Article
  Siddique, Shafaqat; Imran, Muhammad; Rauer, Miriam; Kaloudis, Michael; Wycisk, Eric; Emmelmann, Claus; Walther, Frank
  Materials & Design (83): 661-669 (2015-10-15)
  Publisher DOI
• Influences of post processing on laser powder bed fused Ti-6Al-4V part properties - Conference Paper
  Jahn, Simon; Seyda, Vanessa; Emmelmann, Claus; Sändig, Sabine
  Materials Science and Technology Conference and Exhibition (1): 69-76 (2015-10)
  
• Manufacturing of Medical Implants by Combination of Selective Laser Melting and Laser Ablation - Journal Article
  Hallmann, Sina; Glockner, P.; Daniel, Christian; Seyda, Vanessa; Emmelmann, Claus
  Lasers in Manufacturing and Materials Processing 3 (2): 124-134 (2015-09-01)
  Publisher DOI
• Laser cutting of carbon fiber-reinforced plastic with an absorber transparent for visible spectrum - Journal Article
  Canisius, Marten; Herzog, Dirk; Schmidt-Lehr, Matthias; Oberlander, Max; Direnga, Julie; Emmelmann, Claus
  Journal of Laser Applications 3 (27): 032003 (2015-08-01)
  Publisher DOI
• Influence of pin size on tensile and fatigue behavior of TI-CFRP hybrid structures produced by laser additive manufacturing - Conference Paper
  Huelsbusch, Daniel; Haack, Matthias; Solbach, Andreas; Emmelmann, Claus; Walther, Frank
  ICCM International Conferences on Composite Materials (2015-07)
  
• Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting - Journal Article
  Siddique, Shafaqat; Imran, Muhammad; Wycisk, Eric; Emmelmann, Claus; Walther, Frank
  Journal of Materials Processing Technology (221): 205-213 (2015-07)
  Publisher DOI
• Investigations on the process strategy of laser remote cutting of carbon fiber reinforced plastics with a thickness of more than 5 MM - Conference Paper
  Schmidt-Lehr, Matthias; Oberlander, Max; Herzog, Dirk; Canisius, Marten; Radek, Markus; Emmelmann, Claus
  ICCM International Conferences on Composite Materials: (2015-07)
  
• Performance of various designs of hybrid loop-loaded CFRP-titanium straps - Conference Paper
  Büttemeyer, Holger; Schiebel, Patrick; Solbach, Andreas; Emmelmann, Claus; Herrmann, Axel S.
  ICCM International Conferences on Composite Materials: (2015-07)
  
• Effect of Al₂ Gd on microstructure and properties of laser clad Mg-Al-Gd coatings - Journal Article
  Chen, Hong; Zhang, Ke; Yao, Chengwu; Dong, Jie; Li, Zhuguo; Emmelmann, Claus
  Applied Surface Science (330): 393-404 (2015-03-01)
  Publisher DOI
• Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4 - Journal Article
  Kranz, Jannis; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications S1 (27): S14001 (2015-02-01)
  Publisher DOI
• Laser cutting of carbon fiber reinforced plastic using a 30 kW fiber laser - Conference Paper
  Herzog, Dirk; Schmidt-Lehr, Matthias; Canisius, Marten; Oberlander, Max; Tasche, Jan Philipp; Emmelmann, Claus
  Journal of Laser Applications S2 (27): S28001 (2015-02-01)
  Publisher DOI
• Fatigue Performance of Laser Additive Manufactured Ti–6al–4V in Very High Cycle Fatigue Regime up to 1E9 Cycles - Journal Article
  Wycisk, Eric; Siddique, Shafaqat; Herzog, Dirk; Walther, Frank; Emmelmann, Claus
  Frontiers in Materials : Structural Materials 2:72
  Open Access | Publisher DOI

2014

• Forschungsschwerpunkt Maritime Systeme - Zukunft gestalten - Forschung und wissenschaftliche Ausbildung - Book
  Müller, Sven-Brian; Krüger, Stefan; Abdel-Maksoud, Moustafa; Rung, Thomas; Ackermann, Günter; Fricke, Wolfgang; Düster, Alexander; Wirz, Friedrich; Kreuzer, Edwin; Pick, Marc-André; Lödding, Hermann; Friedewald, Axel; Grabe, Jürgen; Jahn, Carlos; Emmelmann, Claus
  Open Access
• Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties - Journal Article
  Wycisk, Eric; Solbach, Andreas; Siddique, Shafaqat; Herzog, Dirk; Walther, Frank; Emmelmann, Claus
  Physics Procedia C (56): 371-378 (2014-01-01)
  Open Access | Publisher DOI
• Low coherence interferometry in selective laser melting - Journal Article
  Neef, Arne; Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus; Schönleber, Martin; Kogel-Hollacher, Markus
  Physics Procedia C (56): 82-89 (2014-01-01)
  Open Access | Publisher DOI

2013

• High cycle fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting - Conference Paper
  Wycisk, Eric; Emmelmann, Claus; Siddique, Shafaqat; Walther, Frank
  Manufacturing Science and Technology (ICMST2013) : Selected, Peer Reviewed Papers from the 2013 4th International Conference on Manufacturing Science and Technology (ICMST 2013), August 3-4, 2013, Dubai, UAE. - Zurich : Trans Tech Publishers, 2013. - Seite 134-139
  Publisher DOI
• Experimental and analytical investigation of cemented tungsten carbide ultra-short pulse laser ablation - Conference Paper
  Calderón Urbina, Juan Pablo; Daniel, Christian; Emmelmann, Claus
  Physics Procedia (41): 752-758 (2013)
  Open Access | Publisher DOI
• Laser additive manufacturing of gas permeable structures - Conference Paper
  Klahn, Christoph; Bechmann, Florian; Hofmann, Siegfried; Dinkel, Michael; Emmelmann, Claus
  Physics Procedia (41): 873-880 (2013)
  Open Access | Publisher DOI

2012

• Investigation of aging processes of Ti-6Al-4V powder material in laser melting - Journal Article
  Seyda, Vanessa; Kaufmann, Niko; Emmelmann, Claus
  Physics Procedia (39): 425-431 (2012)
  Open Access | Publisher DOI

2011

• Analysis of laser ablation of CFRP by ultra-short laser pulses with short wavelength - Journal Article
  Emmelmann, Claus; Petersen, Maren; Goeke, André; Canisius, Marten
  Physics Procedia PART 1 (12): 565-571 (2011-01-01)
  Open Access | Publisher DOI
• Laser additive manufacturing of modified implant surfaces with osseointegrative characteristics - Journal Article
  Emmelmann, Claus; Scheinemann, Peter; Munsch, Martin; Seyda, Vanessa
  Physics Procedia PART 1 (12): 375-384 (2011-01-01)
  Open Access | Publisher DOI
• Analysis of the influence of burst-mode laser ablation by modern quality tools - Journal Article
  Emmelmann, Claus; Calderón Urbina, Juan Pablo
  Physics Procedia PART 2 (12): 172-181 (2011-01-01)
  Open Access | Publisher DOI
• Development of plasma-laser-hybrid welding process - Journal Article
  Emmelmann, Claus; Kirchhoff, Marc; Petri, Nikolai
  Physics Procedia PART 1 (12): 194-200 (2011-01-01)
  Open Access | Publisher DOI
• High-precision calibration of a weld-on-the-fly-system - Journal Article
  Emmelmann, Claus; Schenk, Kerstin; Wollnack, Jörg; Kirchhoff, Marc
  Physics Procedia PART 1 (12): 739-743 (2011-01-01)
  Open Access | Publisher DOI
• Process and mechanical properties: Applicability of a scandium modified Al-alloy for laser additive manufacturing - Journal Article
  Schmidtke, Katja; Palm, Frank; Hawkins, A.; Emmelmann, Claus
  Physics Procedia PART 1 (12): 369-374 (2011-01-01)
  Open Access | Publisher DOI
• Systematic development of lightweight components for highly dynamic laser-remote-scanners using topology optimization - Journal Article
  Emmelmann, Claus; Kirchhoff, Marc; Beckmann, Frank
  Physics Procedia (12): 459-464 (2011-01-01)
  Open Access | Publisher DOI

2010

• Influence of laser cutting parameters on CFRP part quality - Conference Paper
  Goeke, André; Emmelmann, Claus
  Physics Procedia PART 2 (5): 253-258 (2010-01-01)
  Open Access | Publisher DOI

2007

• Selective laser melting of lattice structures in solid shells - Conference Paper
  Rehme, Olaf; Emmelmann, Claus; Schwarze, Dieter
  3rd International Conference on Advanced Research in Virtual and Rapid Prototyping (2007)