Geo-Hydroinformatics

Menu

Laboratory & Facilities

Our research laboratory is located in Am Schwarzenberg-Campus 3 (E) at TUHH


We are specialized in designing and developing customized experimental setup for investigation of various multiphase and multiscale processes relevant to soil, water, and energy research. A few examples of experimental stations developed in our previous research and projects together with some of our equipment are listed below:

Experimental stations

Figure 1. Experimental setup for investigation of foam stability at bubble-scale using a 2D Hele–Shaw cell (after Osei-Bonsu et al. (2015), https://doi.org/10.1016/j.colsurfa.2015.06.023).
Figure 1. Experimental setup for investigation of foam stability at bubble-scale using a 2D Hele–Shaw cell (after Osei-Bonsu et al. (2015), https://doi.org/10.1016/j.colsurfa.2015.06.023).
Figure 2. Pore-scale investigation of two-phase flow in porous media using a micro-model with well-defined characteristics (after Rodríguez de Castro et al. (2016), https://doi.org/10.1016/j.jcis.2016.03.027).
Figure 2. Pore-scale investigation of two-phase flow in porous media using a micro-model with well-defined characteristics (after Rodríguez de Castro et al. (2016), https://doi.org/10.1016/j.jcis.2016.03.027).
Figure 3. Evaluation of the effects of drying porous layers in controlling roof surface temperature relevant to roof cooling and building energy efficiency (after Shokri-Kuehni et al. (2016), https://doi.org/10.1016/j.enbuild.2016.06.019).
Figure 3. Evaluation of the effects of drying porous layers in controlling roof surface temperature relevant to roof cooling and building energy efficiency (after Shokri-Kuehni et al. (2016), https://doi.org/10.1016/j.enbuild.2016.06.019).
Figure 4. Cracking patterns formed at the surface of a desiccating clay layer inside an environmental chamber where the ambient temperature and relative humidity could be controlled accurately (after DeCarlo and Shokri (2014), https://doi.org/10.1002/2013WR014466).
Figure 4. Cracking patterns formed at the surface of a desiccating clay layer inside an environmental chamber where the ambient temperature and relative humidity could be controlled accurately (after DeCarlo and Shokri (2014), https://doi.org/10.1002/2013WR014466).
Figure 5. Experimental setup to investigate evaporation from porous media in the presence of a fixed water table (after Shokri-Kuehni et al. (2020), https://doi.org/10.1029/2019WR026707).
Figure 5. Experimental setup to investigate evaporation from porous media in the presence of a fixed water table (after Shokri-Kuehni et al. (2020), https://doi.org/10.1029/2019WR026707).
Figure 6. Obtaining water retention curve of a sand sample with particle size ranging from 0.4 to 0.8 mm using hanging column method.
Figure 7. Experimental setup to investigate the influence of microplastics in evaporation under different air velocity and heat radiation levels.

Equipment

  • Constant climate chamber Memmert HPP750eco

This environmental testing chamber allows us to vary the temperature from 0 to 70 °C with a setting accuracy of 0.1 °C and the relative humidity from 10 to 90 % with an accuracy of 0.5 % rh.

  • Universal oven Memmert UN110

Universal oven

The oven allows to heat and dry probes up to 300 °C with an accuracy of 0.1 /0.5 °C.

  • High precision lab balance Kern ABT 220-4NM

Allows to measure masses up to 220 g with an accuracy of 0.01 mg.

  • Lab balance Kern EW 6200-2NM (6x)

Lab balance

Allows to measure masses up to 6200 g with an accuracy of 0.01 g.

  • Soil analysis sensor & data logger Scanntronik (60x)

Soil analysis sensor

Allows fully automatic measuring and logging of soil moisture, electrical conductivity and environmental temperature in soils at field experiments.

  • Retsch Vibratory sieve shaker AS 200 control

Soil analysis sensor

Allows particle size analysis of soil.

  • Meter minidisk infiltrometer MD1 (2x)

Soil analysis sensor

Allows measuring of infiltration rate in soils.

  • FLIR A700 Professional Science Kit

Allows thermal filming with a resolution of 640 × 480 in the spectral Range of  7.5–14.0 µm and frame rates up to 30 Hz. 

  • Hot-wire anemometer VOLTCRAFT PL-135HAN

Allows measuring of air temperature, air velocity and volume flow rate in the ranges of 0 - 50 °C, 0.1 - 25 m/s and 0 - 99999 m³/min, respectively.

  • Luxmeter Voltcraft MS-200LED

Allows measuring of illumination and light strength of conventional incandescent lamps and LED lighting in the range of 0.01 - 400000 lx.

To top