2025

• Schibsdat, Sebastian; Wu, Ya-Jing; Keunecke, Martin; Baron, Sarah; Höche, Daniel; Zemke, Jens; Götschel, Sebastian; Herrmann, Christoph; Dege, Jan Hendrik
  A novel data concept for cutting processes through comprehensive experimental setup enabling grey-box models - Journal Article
  Wear 582-583: 206348 (2025)
  Open Access | Publisher DOI
• Möhle, Florian; Koch, Svenja; Lödding, Hermann; Jahn, Carlos
  Modelling of logistics objectives at the sea side of container terminals - Book Part
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Thielager, Lennard; Alieksieiev, Volodymyr; Jansen, Tim Maximilian; Mundt, Christopher; Lödding, Hermann
  A coordinated approach to apply value stream analysis to the one-of-a-kind shipbuilding supply chain - Conference Paper
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Steffens, Constantin; Mundt, Christopher; Lödding, Hermann
  Concept of manufacturing control for a workstation with sequence-dependent setup times in a make-to-stock production - Conference Paper
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Hasslan, Synnøve Sunne; Alieksieiev, Volodymyr; Beigpoor Shahrivar, Rafat; Lange, Ann-Kathrin; Haavardtun, Per; Steger-Jensen, Kenn
  RAPID intermodal transport system: a new concept for joint transportation of passengers and freight - Conference Paper
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Alieksieiev, Volodymyr; Thielager, Lennard; Jansen, Tim Maximilian; Mundt, Christopher; Lödding, Hermann
  Synchronizing the shipbuilding supply chain with generic cumulative production figures - Conference Paper
  International Conference on Advances in Production Management Systems, APMS 2025
  Publisher DOI
• Evers, Lasse; Müller, Matthias; Möller, Carsten; Brouschkin, Alexander; Dege, Jan Hendrik
  Control loop based dimensional error compensation for milling of near-net-shaped, thin-walled structures - Conference Proceedings
  Decarbonizing Value Chains, ed. by Holger Kohl, Günther Seliger, Franz Dietrich, Ha Thuc Vien: 399-407 (2025)
  Open Access | Publisher DOI
• Mundt, Christopher; Weidner, Robert; Möller, Carsten; Dege, Jan Hendrik; Lödding, Hermann
  Der befähigte Werker: Kopplung von Smarten Handwerkzeugen, aktiven Exoskeletten und Digitalen Assistenzsystemen in der Produktion der Zukunft - Journal Article
  Zeitschrift für Wirtschaftlichen Fabrikbetrieb 120 (6): 457-463 (2025)
  Publisher DOI
• Brouschkin, Alexander; Möller, Carsten; Dege, Jan Hendrik
  Modeling Process Forces in CFRP Grinding: Influence of Cutting Materials and Coolant on Process Force Behavior - Conference Paper
  20th CIRP Conference on Modeling of Machining Operations, CMMO 2025
  Open Access | Publisher DOI
• Petersen, Julian; Nourmohammadi, Amir; Fathi, Masood; Ghobakhloo, Morteza; Tavana, Madjid
  Line balancing for energy efficiency in production: a qualitative and quantitative literature analysis - Journal Issue
  Computers & Industrial Engineering 205: 111144 (2025)
  Open Access | Publisher DOI
• Evers, Lasse; Zapf, Hannes; Blühm, Melchior Frieder; Dege, Jan Hendrik
  Verzugsminimierung bei der Zerspanung von AM-Halbzeugen - Journal Article
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 120 (4): 236-241 (2025)
  
• Grazi, Lorenzo; Feijoo Alonso, Abel; Gąsiorek, Adam; Pertusa Llopis, Afra Maria; Grajeda, Alejandro; Kanakis, Alexandros; Rodriguez Vidal, Ana; Parri, Andrea; Vidal, Felix; Ergas, Ioannis; Zeljkovic, Ivana; Durá, Javier Pamies; Mein, Javier Perez; Katsampiris-Salgado, Konstantinos; Rocha, Luís F.; Rodriguez, Lorena Núñez; Petry, Marcelo R.; Neufeld, Michal; Dimitropoulos, Nikos; Köster, Nina; Mimica, Ratko; Varão Fernandes, Sara; Crea, Simona; Makris, Sotiris; Giartzas, Stavros; Settler, Vincent; Masood, Jawad
  Methodology and challenges of implementing advanced technological solutions in small and medium shipyards: the case study of the Mari4_YARD project - Journal Article
  Electronics 14 (8): 1597 (2025)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Model based assessment of maximal surface temperatures and heat flow in edge trimming of UD CFRP with tools of different type - Journal Article
  Composites Part B: Engineering 300: 112483 (2025)
  Open Access | Publisher DOI
• Stützle, Joshua; Stammler, Matthias; Dege, Jan Hendrik; Thies, Christian
  Life cycle assessment of circular economy strategies for high-strength connection bolts in wind turbines - Conference Paper
  32nd CIRP Conference on Life Cycle Engineering, LCE 2025
  Open Access | Publisher DOI
• Thürer, Matthias; Fernandes, Nuno O.; Lödding, Hermann; Stevenson, Mark
  Material flow control in make-to-stock production systems : an assessment of order generation, order release and production authorization by simulation - Journal Article
  Flexible Services and Manufacturing Journal 37 (1): 105055 (2025)
  Open Access | Publisher DOI
• Rawal, Parth Kapil
  An intelligent versatile pipeline for 6D localization of industrial components in a production environment - Doctoral Thesis
  Forschung für die Produktionstechnik von morgen 6: (2025)
  
• Steffens, Constantin; Lödding, Hermann
  Assessing the impact of cyclical sequencing in make-to-stock production with sequence-dependent setup times - Conference Paper
  58th CIRP Conference on Manufacturing Systems, CMS 2025
  Open Access | Publisher DOI
• Pöttker, Silas; Benter, Martin; Kuhlang, Peter; Lödding, Hermann
  Rapid and highly detailed productivity analyses for assembly processes using motion capture systems - Conference Paper
  58th CIRP Conference on Manufacturing Systems, CMS 2025
  Open Access | Publisher DOI
• Witte, Svenja; Möhle, Florian; Lödding, Hermann; Jahn, Carlos
  Simulation-based analysis of conflicting objectives of quay cranes and terminal trucks at container terminals - Conference Paper
  21. ASIM-Fachtagung Simulation in Produktion und Logistik 2025
  Open Access | Publisher DOI
• Rawal, Parth; Sompura, Mrunal; Hintze, Wolfgang
  Synthetic data generation procedures for domain-specific environments in manufacturing - Conference Paper
  Procedia Computer Science 253: 1668-1679 (2025)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  The role of material properties in modeling maximal surface temperatures and heat distribution in milling of UD CFRP - Review
  CIRP journal of manufacturing science and technology 62: 24-37 (2025)
  Publisher DOI
• Lödding, Hermann; Steffens, Constantin; Winter, Michael
  The strong effect of flexible capacities on achievable WIP levels and throughput times : a simple model and its implications - Journal Article
  International Journal of Production Research 63 (6): 2291-2304 (2025)
  Open Access | Publisher DOI
• Köttner, Lars
  Zerspankraftmodellierung und Prozessgrenzen der Umrissbearbeitung von FKV-Bauteilen mit scheibenförmigen Werkzeugen - Doctoral Thesis
  Wissen schafft Innovation 57: (2025)
  Open Access

2024

• Petersen, Julian; Mundt, Christopher; Lödding, Hermann
  Development of a multi-method analysis for make-to-order manufacturers - Conference Paper
  Congress of the German Academic Association for Production Technology, WGP 2024
  Publisher DOI
• Demke, Tabea Marie; Hiller, Tobias; Welzel, Kira; Steffens, Constantin; Mundt, Christopher; Alieksieiev, Volodymyr; Fulterer, Judith; Maetschke, Jan; Kuhn, Calvin; Kalchschmid, Vincent; Luber, Mario
  Status Quo on Production Planning and Control - Journal Article
  Journal of production systems and logistics 4: 10 (2024)
  Open Access | Publisher DOI
• Rawal, Parth; Valencia, Daniel; Hintze, Wolfgang
  An Intelligent Pipeline for Localization of Industrial Components in Robotic Manufacturing Applications - Conference Paper
  27th European Conference on Artificial Intelligence, ECAI 2024
  Open Access | Publisher DOI
• Alieksieiev, Volodymyr; Beigpoor Shahrivar, Rafat; Jahn, Carlos; Lödding, Hermann
  Modeling of logistics objectives at rail-road inland transshipment terminals - Conference Paper
  43rd IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2024
  Publisher DOI
• Evers, Lasse; Blühm, Melchior Frieder; Weise, Tom; Dege, Jan Hendrik
  Rattervermeidung beim Fräsen mit Industrierobotern - Journal Article
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (9): 593-598 (2024)
  Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut - Conference Paper
  3rd CIRP Conference on Composite Material Parts Manufacturing, CCMPM2024
  Open Access | Publisher DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut - Conference Paper
  Procedia CIRP 131: 19-25 (2025)
  Open Access | Publisher DOI
• Kilian, Leonie; Fehn, Patrick; Bischop, Floyd; Brouschkin, Alexander; Dege, Jan Hendrik; Krause, Dieter; Weigold, Matthias
  High-Precision Functional Surfaces on CFRP Components Investigation of Grinding Processes, Tribological Behavior, and the Service Life Based on the Example of Motor Spindle Components Made of Carbon Fiberreinforced Polymer (CFRP) - Journal Article
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 553-557 (2024)
  Publisher DOI
• Brouschkin, Alexander; Otto, Niklas; Möller, Carsten; Dege, Jan Hendrik
  Surface quality during grinding of CFRP - Journal Article
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 558-562 (2024)
  Publisher DOI
• Flehmke, Malte; Hinrichs, Marco; Möller, Carsten; Dege, Jan Hendrik
  Cutting carbon footprint with smart tool management and cemented carbide (WC-Co) upcycling - Conference Paper
  6th Conference on Production Systems and Logistics, CPSL 2024
  Publisher DOI
• Köster, Nina; Lödding, Hermann
  Digitales Assistenzsystem für die Steuerung der maritimen Inbetriebnahme - Journal Article
  Schiff & Hafen 7: 16-19 (2024)
  
• Brouschkin, Alexander; Hintze, Wolfgang; Dege, Jan Hendrik
  Influence of spatial engagement angles on machining forces and surface roughness in turning of unidirectional CFRP - Journal Article
  CIRP Journal of Manufacturing Science and Technology 51: 201-212 (2024)
  Open Access | Publisher DOI
• Brouschkin, Alexander; Köttner, Lars; Hintze, Wolfgang; Dege, Jan Hendrik
  Prediction of surface profile in CFRP machining through phenomenological analysis and inverse continuous wavelet transformation - Conference Paper
  7th CIRP Conference on Surface Integrity, CSI 2024
  Open Access | Publisher DOI
• Mundt, Christopher; Lödding, Hermann
  Coping with the uncertainties of make-to-order production : a new approach for determining reliable delivery times with the throughput diagram - Journal Article
  Production planning & control 36 (8): 1110-1136 (2025)
  Open Access | Publisher DOI
• Piontek, Simon; Gäbler, Marcel; Lödding, Hermann
  Integration of smart hand tools and digital assistance systems - Conference Paper
  57th CIRP Conference on Manufacturing Systems, CMS 2024
  Open Access | Publisher DOI
• Petersen, Julian; Nourmohammadi, Amir; Fathi, Masood; Burmeister, Carsten
  Multi-objective optimization of transfer line balancing problem considering cycle time and energy expenditure - Conference Paper
  57th CIRP Conference on Manufacturing Systems 2024, CMS 2024
  Open Access | Publisher DOI
• Brouschkin, Alexander; Köttner, Lars; Hintze, Wolfgang; Dege, Jan Hendrik
  Prediction of surface profile in CFRP machining - Conference Presentation
  Procedia CIRP 123: 143-148 (2024)
  Open Access
• Alieksieiev, Volodymyr; Winter, Jesse-James; Harlem, Jannick von; Grafelmann, Michaela; Jahn, Carlos; Lödding, Hermann
  Untersuchung von Doppelspielen eines Portalkrans auf Umschlagterminals - Conference Paper
  32. Internationale Kranfachtagung 2024
  Open Access
• Kirchner, Eckhard; Wallmersperger, Thomas; Gwosch, Thomas; Menning, Johannes D. M.; Petersen, Julian; Breimann, Richard; Kraus, Benjamin; Welzbacher, Peter; Küchenhof, Jan; Krause, Dieter; Knoll, Erich; Otto, Michael; Hasse, Alexander; Muhammedi, Benjamin; Seltmann, Stephanie; Schäfer, Günter; Lohrengel, Armin; Thielen, Stefan; Stiemcke, Yvo; Koch, Oliver; Ewert, Arthur; Rosenlöcher, Thomas; Schlecht, Berthold; Prokopchuk, Artem; Henke, Ernst-Friedrich Markus; Herbst, Felix; Matthiesen, Sven; Riehl, Daniel; Keil, Ferdinand; Hofmann, Klaus; Pape, Florian; Konopka, Dennis; Poll, Gerhard; Steppeler, Tobias; Ottermann, Rico; Dencker, Folke; Wurz, Marc C.; Puchtler, Steffen; Baszenski, Julian Thao; Winnertz, Martin; Jacobs, Georg; Lehmann, Benajmin; Stahl, Karsten
  A review on sensor‐integrating machine elements - Journal Article
  Advanced Sensor Research 3 (4): 2300113 (2024)
  Open Access | Publisher DOI
• Brosche, Justus; Wackerle, Hannes; Augat, Peter; Lödding, Hermann
  Individualized workplace ergonomics using motion capture - Journal Article
  Applied Ergonomics 114: 104140 (2024)
  Publisher DOI
• Breitzke, André; Hintze, Wolfgang
  Workshop-suited identification of thermo-elastic errors of three-axis machine tools using on-machine measurement - Journal Article
  Precision Engineering 85: 72-88 (2024)
  Open Access | Publisher DOI
• Elzalabany, Ahmed
  A digital assistance system for maritime commissioning processes - Doctoral Thesis
  Wissen schafft Innovation 55: (2024)
  Open Access
• Pöttker, Silas; Jansen, Tim Maximilian; Lödding, Hermann
  Analyse von Arbeitsabläufen mit Motion-Capture-Systemen - Journal Article
  Industry 4.0 Science 40 (5): 43-49 (2024)
  Open Access | Publisher DOI
• Pöttker, Silas; Lödding, Hermann
  Digital assembly design with a motion capture system - Conference Paper
  57th CIRP Conference on Manufacturing Systems, CMS 2024
  Open Access | Publisher DOI
• Köttner, Lars; Jakele, Lukas; Hintze, Wolfgang
  Kraftmodellierung beim Schleifen von UD-CFK unter räumlichen Eingriffsbedingungen - Conference Paper
  Schweizer Schleif-Symposium, SSS 2024
  Open Access
• Winter, Michael
  Logistische Modellierung von Chargenarbeitssystemen - Doctoral Thesis
  Wissen schafft Innovation 54: (2024)
  Open Access
• Mundt, Christopher
  Modellbasierte Auftragsannahme und -terminierung - Doctoral Thesis
  Wissen schafft Innovation 53: (2024)
  Open Access
• Breitzke, André
  Modellbasierte Identifikation und Korrektur umgebungstemperaturabhängiger thermoelastischer Verlagerungen dreiachsiger Portalfräsmaschinen - Doctoral Thesis
  Wissen schafft Innovation 56: (2024)
  
• Kuthe, Jona; Alieksieiev, Volodymyr; Jansen, Tim Maximilian; Lödding, Hermann; Metzmacher, Paul; Fölsch, Jannek
  Product-specific and early-staged determination of production space needs - Journal Article
  WT Werkstattstechnik 114 (6): 298-306 (2024)
  Open Access | Publisher DOI
• Heiden, Bernhard; Tonino-Heiden, Bianca; Singerl, Sabrina; Alieksieiev, Volodymyr
  Production portfolio theory : risk evaluation and a new Industrial application (IA) - Conference Paper
  Future of Information and Communication Conference, FICC 2024
  Publisher DOI
• Piontek, Simon; Schibsdat, Sebastian; Dege, Jan Hendrik; Lödding, Hermann
  Smarte Handwerkzeuge und Digitale Assistenzsysteme - Journal Article
  Unter Span: 30-31 (2024)
  
• Flehmke, Malte; Schibsdat, Sebastian
  Smartes Bohren - Journal Article
  CU Reports: 78 (1): 1-78 (2024)
  
• Heiden, Bernhard; Pacnik, Danijel; Pregl, Jessica; Müller, Maximilian; Leitner, Simone; Alieksieiev, Volodymyr; Tonino-Heiden, Bianca
  Tile quality detection device : Internet of Things (IoT) demonstration prototype - Conference Paper
  9th International Conference on Internet of Things, Big Data and Security, IoTBDS 2024
  Open Access | Publisher DOI

2023

• Junghans, Sebastian; Flehmke, Malte; Stützle, Joshua; Möller, Carsten; Dege, Jan Hendrik
  Enhancing Tool Replacement Decisions in Milling of Ti-6Al-4V Using Convolutional Neural Networks and Time-series-to-image Encoding - Conference Paper
  Research Paper Series, SSRN (2023-11-29)
  Publisher DOI
• Fulterer, Judith; Kuhn, Calvin; Maetschke, Jan; Kalchschmid, Vincent; Karg, Florian; Luber, Mario; Demke, Tabea Marie; Hiller, Tobias; Kämpfer, Tim; Steffens, Constantin; Mundt, Christopher; Alieksieiev, Volodymyr
  PPS-Report 2023: Studienergebnisse - Report
  PPS-Report, Werkzeugmaschinenlabor WZL der RWTH Aachen University (2023)
  Open Access | Publisher DOI
• Evers, Lasse; Blühm, Melchior Frieder; Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  Characterization of the surface error during peripheral milling of thin-walled, near-net-shaped structures - Conference Paper
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Publisher DOI
• Flehmke, Malte; Junghans, Sebastian; Jessen, Andreas; Shchegel, Ganna; Möller, Carsten; Dege, Jan Hendrik
  Improving Efficiency and Sustainability Through Predictive Tool Wear Monitoring During Manual Drilling of CFRP - Conference Paper
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Publisher DOI
• Junghans, Sebastian; Romanenko, Denys; Hintze, Wolfgang
  Nutzung von Methoden des Maschinellen Lernens für die Werkstückqualität- und Werkzeugverschleißüberwachung bei semi-automatischen Bohrprozessen - Conference Paper
  72. Deutscher Luft- und Raumfahrtkongress (DLRK 2023)
  Publisher DOI
• Geier, Norbert; Xu, Jinyang; Poór, Dániel István; Dege, Jan Hendrik; Davim, João Paulo
  A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites - Review
  Composites Part B: Engineering 266: 111037 (2023-11)
  Open Access | Publisher DOI
• Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  ML-Modelle für den intelligenten Werkzeugwechsel - Journal Article
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (11): 752-757 (2023-11)
  Publisher DOI
• Evers, Lasse; Müller, Matthias; Möller, Carsten; Dege, Jan Hendrik
  Dimensional Error Compensation during Finish Milling - Journal Article
  Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (10): 688-692 (2023-10-19)
  Publisher DOI
• Jeong, Yongkuk; Flores-garcía Erik; Piontek, Simon; Wiktorsson, Magnus
  Implementing transmission of data for digital twins in human-centered cyber-physical systems - Conference Paper
  Procedia CIRP 120: 992-997 (2023-10)
  Open Access | Publisher DOI
• Jansen, Tim Maximilian; Karl, Oliver; Elzalabany, Ahmed; Lödding, Hermann
  Streamlining the execution of maritime commissioning with a digital assistance system - Conference Paper
  International Conference on Advances in Production Management Systems (APMS 2023)
  Publisher DOI
• Grafelmann, Michaela; Alieksieiev, Volodymyr; Lödding, Hermann; Jahn, Carlos
  Logistics Objective conflicts at intermodal terminals - Conference Paper
  20. ASIM-Fachtagung Simulation in Produktion und Logistik (2023)
  Publisher DOI
• Köster, Nina; Mundt, Christopher; Lödding, Hermann
  Planning and Control of Maritime Commissioning - Conference Paper
  International Conference on Advances in Production Management Systems (APMS 2023)
  Publisher DOI
• Hinrichs, Marco; Dege, Jan Hendrik; Schleinkofer, Uwe; Venturini, Remus
  Novel tuned mass damper mitigating chatter vibrations of slender boring bars with small diameter - Journal Article
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (7-8): 476-480 (2023-08-14)
  Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina; Dege, Jan Hendrik; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Oxidation and wear behavior of CrAlMoN with varied Mo-content for cutting Ti6Al4V - Journal Article
  Production Engineering 18: 87-97 (2024)
  Open Access | Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlMoN high performance tool coatings for machining of TiAl6V4 - Journal Article
  Production Engineering 17 (3-4): 437-444 (2023-06)
  Open Access | Publisher DOI
• Flehmke, Malte; Romanenko, Denys; Rosenthal, Oliver; Dege, Jan Hendrik
  Klassifizierung von Prozesszuständen beim Bohren - Journal Article
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (5): 302-306 (2023)
  Publisher DOI
• Jahn, Niklas; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Störungsmanagement mit digitalen Assistenzsystemen : ein generischer Ansatz für den Produktlebenszyklus - Journal Article
  Industrie 4.0 Management 39 (2): 15-19 (2023)
  
• Koch, Philip; Rawal, Parth; Töpfer, Nico; Haß, Tim; Böhlmann, Christian; Hintze, Wolfgang
  Modular lightweight robot system for aircraft production using a generic OPC UA skill concept - Journal Article
  Production Engineering 17: 329-339 (2023-03-15)
  Open Access | Publisher DOI
• Giskeødegård, Marte Fanneløb; Kjersem, Kristina; Jahn, Niklas; Rost, Robert
  Tool or hassle? - Production workers evaluation of the potential of digital assistance systems on the shopfloor in shipbuilding projects - Journal Article
  Cogent Engineering 10 (1): 2161763 (2023-01)
  Open Access | Publisher DOI
• Steenwerth, Philipp
  Analyse und Optimierung von Suchvorgängen in der industriellen Produktion - Doctoral Thesis
  Wissen schafft Innovation 50: (2024)
  Open Access
• Brouschkin, Alexander; Dege, Jan Hendrik; Hintze, Wolfgang
  CFK-Zerspanen für alle : Verfahrensunabhängiges Kraft- und Oberflächenmodell beim Zerspanen von CFK mit definierter Schneide - Journal Article
  CU reports (2): 59 (2023)
  
• Piontek, Simon; Schütze, Mats; Lödding, Hermann
  Digital assistance for aircraft manufacturing – process requirements and technologies - Conference Paper
  Procedia CIRP 120: 105–110 (2023)
  Open Access | Publisher DOI
• Rost, Jan Robert
  Digitale Assistenzsysteme für kollaboratives Arbeiten in der Unikatproduktion - Doctoral Thesis
  Wissen schafft Innovation 49: (2023)
  Open Access
• Flehmke, Malte; Dege, Jan Hendrik
  Manuelles Bohren bei der Montage von Flugzeugstrukturen : neue Technologien und Herausforderungen im Fokus - Journal Article
  Unter Span 2023: 28-29 (2023)
  
• Hintze, Wolfgang; Hinrichs, Marco; Rosenthal, Oliver; Schleinkofer, Uwe; Venturini, Remus
  Model based design of tuned mass dampers for boring bars of small diameter - Conference Paper
  19th CIRP Conference on Modeling of Machining Operations - Procedia CIRP 117: 193-198 (2023)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Brouschkin, Alexander; Köttner, Lars; Blühm, Melchior Frieder
  Model based prediction of force and roughness extrema inherent in machining of fibre reinforced plastics using data merging - Conference Paper
  12th Congress of the German Academic Association for Production Technology (WGP 2022)
  Publisher DOI
• Mehnen, Jan Philipp
  Modellgestützte Berechnung der thermischen Belastung bei der Zerspanung von unidirektionalem CFK - Doctoral Thesis
  Wissen schafft Innovation 52: (2023)
  Open Access
• Brosche, Justus
  Nutzung von Motion-Capture-Technologien zur individuellen Ergonomieanalyse in der Produktion - Doctoral Thesis
  Wissen schafft Innovation 51: (2023)
  Open Access
• Evers, Lasse; Blühm, Melchior Frieder; Wollenhaupt, Jan; Dege, Jan Hendrik
  Robotergeführte spanende Nachbearbeitung additiv hergestellter Großbauteile - Journal Article
  Unter Span: 26-27 (2023)
  
• Muth, M.; Carstensen, P.; Hintze, Wolfgang; Gnadt, S.; Brillinger, Christoph; Möller, Christian; Böhlmann, Christian
  Sensor-guided machining of large-scale CFRP components based on resin transfer molded features - Conference Paper
  Optical Measurement Systems for Industrial Inspection XIII (2023)
  Publisher DOI
• Kovalenko, Valentyn; Volodymyr, Rubashka; Alieksieiev, Volodymyr; Heiden, Bernhard
  Stability analysis of dismountable pallet racks - Conference Paper
  Lecture Notes in Networks and Systems 762: 1-16 (2023)
  Publisher DOI
• Rawal, Parth; Sompura, Mrunal; Hintze, Wolfgang
  Synthetic data generation for bridging Sim2Real gap in a production environment - Preprint
  arXiv: 2311.11039 (2023)
  Open Access | Publisher DOI

2022

• Rana, Pulkit; Hintze, Wolfgang; Schall, T.; Polley, W.
  Implementation of MC-SPG particle method in the simulation of orthogonal turning process - Conference Paper not in Proceedings
  12th Congress of the German Academic Association for Production Technology (WGP 2022)
  
• Friedewald, Axel; Rost, Robert; Meluzov, Nikolaj; Lödding, Hermann; Knödler, Tobias; Peschke, Jörg; Dombrowski, Tobias
  Wartung und Service von Schiffen mit erweiterter Realität - Journal Article
  Schiff & Hafen : Fachzeitschrift für Schifffahrt, Schiffbau & Offshore-Technologie 74 (5): (2022)
  
• Elzalabany, Ahmed Mohamed Abdelmeguid; Settler, Vincent; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Automated generation and low-effort authoring of commissioning content in the maritime industry - Journal Article
  International Conference on Computer Applications in Shipbuilding - ICCAS 2022
  Publisher DOI
• Mundt, Christopher; Beck, Eilis Bernadette; Lödding, Hermann
  Determining due dates for rush orders - Conference Paper
  International Conference on Advances in Production Management Systems (APMS 2022)
  Publisher DOI
• Romanenko, Denys; Jothi Prakash, Vishnuu; Kuhn, Tobias; Möller, Carsten; Hintze, Wolfgang; Emmelmann, Claus
  Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining - Journal Article
  Procedia CIRP 111: 271-276 (2022)
  Open Access | Publisher DOI
• Piontek, Simon; Lödding, Hermann
  User-Centric Digital Assistance with Smart Tools for Manual Assembly Processes - Conference Paper
  International Conference on Advances in Production Management Systems (APMS 2022)
  Publisher DOI
• Maetschke, Jan; Fulterer, Judith; Janke, Tim; Zipfel, Alexander; Bank, Lukas; Theumer, Philipp; Mundt, Christopher; Köster, Nina; Kämpfer, Tim; Heuer, Tammo; Hiller, Tobias
  PPS-Report 2021 - Journal Article
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (6): 400-404 (2022)
  Publisher DOI
• Elzalabany, Ahmed Mohamed Abdelmeguid; Settler, Vincent; Rost, Robert; Lödding, Hermann
  Digitalization of maritime commissioning : a system for automatic content creation and augmented reality-based commissioning execution - Conference Paper
  21st International Conference on Computer and IT Applications in the Maritime Industries (COMPIT 2022)
  
• Hamann, Tobias; Hansen, Stephan; Bitterolf, David; Böhlmann, Christian; Möller, Christian; Seifried, Robert; Hintze, Wolfgang
  Experimental analysis of a hybrid drive train implemented in a novel industrial robot approach - Conference Paper
  54th International Symposium on Robotics (ISR Europe 2022) : (München) : 2022.06.20-21. - [Berlin ; Offenbach] : VDE Verlag GmbH, 2022. - Seite 142-149
  
• Hintze, Wolfgang; Romanenko, Denys; Molkentin, Lukas; Köttner, Lars; Mehnen, Jan Philipp
  Holistic process monitoring with machine learning classification methods using internal machine sensors for semi-automatic drilling - Journal Article
  Procedia CIRPs 107: 972-977 (2022)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Hinrichs, Marco; Rosenthal, Oliver; Schleinkofer, Uwe; Venturini, Remus
  Tuned mass dampers for boring bars with small diameter - Conference Paper
  20th Plansee Seminar: Artikelnummer HM 9 (2022)
  
• Breitzke, André; Hintze, Wolfgang
  Workshop-suited geometric errors identification of three-axis machine tools using on-machine measurement for long term precision assurance - Conference Paper
  Precision Engineering 75: 235-247 (2022-05)
  Publisher DOI
• Brillinger, Christoph; Kallipalayam Murugesan, Satheesh Kumar; Möller, Christian; Böhlmann, Christian; Hintze, Wolfgang; Niermann, Dirk
  Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CRFP Components (SAE Paper 2022-01-0041) - Conference Paper
  SAE International AeroTech (AEROTECH 2022)
  Publisher DOI
• Brillinger, Christoph; Kallipalayam Murugesan, Satheesh Kumar; Möller, Christian; Böhlmann, Christian; Hintze, Wolfgang; Niermann, Dirk
  Accuracy Analysis for a Flow Line Process using a Mobile Holding Fixture for Machining CFRP Components - Conference Paper
  SAE International AeroTech (AEROTECH 2022)
  Publisher DOI
• Hintze, Wolfgang; Köttner, Lars; Brouschkin, Alexander; Blühm, Melchior Frieder; Jakele, Lukas
  A General Unique Description of Cutting Direction and Engagement for Arbitrary Oblique Cutting of Orthotropic Materials – Modeling and Validation for Grinding of Unidirectional CFRP - Technical Report
  CIRP Winter Meetings, STC C - Cutting (2022)
  
• Lissek, Fabian; Kaufeld, Michael; Bergmann, Jean Pierre; Hintze, Wolfgang
  Eine Frage des Timings : schädigungsfreies Bohren nachgiebiger CFK-Strukturen - Journal Article
  Werkstatt + Betrieb (): 358589 (17-02-2022)
  
• Jahn, Niklas; Jansen, Tim Maximilian; Rost, Robert; Lödding, Hermann
  Disruption management in one-off production with collaborative digital assistance systems : benefits of an integrative approach with a generic data model - Conference Paper
  WGAB-Forschungsseminar (2022)
  Open Access | Publisher DOI
• Brosche, Justus; Lödding, Hermann; Wackerle, H.; Augat, Peter
  Ein Lernassistenzsystem zur Verbesserung der Ergonomie - Journal Article
  Industrie 4.0 Management : Gegenwart und Zukunft industrieller Geschäftsprozesse 2: (2022)
  
• Hintze, Wolfgang; Möller, Carsten; Ploog, Petter; Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina
  Influence of self-lubricating tool coatings on cutting temperature and coefficient of friction during turning of Ti6Al4V - Conference Paper
  20th Plansee Seminar (2022)
  
• Meluzov, Nikolaj
  Informationsmanagement für ein digitales Instandhaltungsassistenzsystem - Doctoral Thesis
  Wissen schafft Innovation 48: (2022)
  Open Access
• Engehausen, Friederike; Lödding, Hermann
  Managing sequence-dependent setup times - The target conflict between output rate, WIP and fluctuating throughput times for setup cycles - Journal Article
  Production Planning and Control 33 (1): 84-100 (2022)
  Publisher DOI
• Surmann, Tobias; Lange, Matthias; Dege, Jan Hendrik
  Milling of titanium aerostructures using solid cemented carbide tools – Evaluation and modelling of tool wear - Journal Article
  WT Werkstattstechnik 112 (1-2) : 73-78 (2022)
  Publisher DOI
• Steenwerth, Philipp; Lödding, Hermann
  Sensorgestützte Analyse der Maschinenbedienung in der Kleinserienfertigung - Journal Article
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 117 (12): 813-819 (2022)
  Publisher DOI
• Rana, Pulkit; Hintze, Wolfgang; Schall, T.; Polley, W.
  Study on the Influence of the Coating Thickness in Turning of a Hard to Machine Material Using FEM-Simulation - Conference Paper
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI

2021

• Bobzin, Kirsten; Brögelmann, Tobias; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlVN coatings for turning of Ti6Al4V: oxidation and wear behavior - Journal Article
  Materialwissenschaft und Werkstofftechnik 52 (12): 1394-1412 (2021-12)
  Open Access | Publisher DOI
• Hintze, Wolfgang; Köttner, Lars
  Curved circular cutting of lightweight structures - Text
  China-Germany-Japan Workshop on Advanced Manufacturing of New Energy Vehicles (2021)
  
• Bank, Lukas; Luber, Mario; Theumer, Philipp; Zipfel, Alexander; Kämpfer, Tim; Hiller, Tobias; Heuer, Tammo; Demke, Tabea Marie; Mundt, Christopher; Köster, Nina; Janke, Tim; Maibaum, Judith; Schmidthuber, Matthias
  PPS-Report 2021 : Studienergebnisse - Report
  PPS-Report 4 : (2022)
  Open Access | Publisher DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Wear development of self-lubricating CrAlVN coatings during turning Ti6Al4V - Journal Article
  SSRN eLibrary: 70-77 (2021)
  Open Access | Publisher DOI
• Mehnen, Jan Philipp; Hintze, Wolfgang; Köppe, Marek
  Influence of contour radius and fiber orientation on heat accumulation during machining of unidirectional CFRP - Journal Article
  MM Science Journal 2021-November (5): 5085-5092 (2021-11-01)
  Publisher DOI
• Winter, Michael; Schoop, Bastian; Lödding, Hermann
  Produktionskennlinien mit Belastungsflexibilität Wie Flexibilität Bestandseinsparungen ermöglicht - Journal Article
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 116 (11): 762-765 (2021-11)
  Publisher DOI
• Möller, Carsten; Hintze, Wolfgang; Wenserski, Robert von
  Impact separation of support structures from laser powder bed fusion generated LPBF parts - Conference Paper
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI
• Schulze, Benjamin; Rawal, Parth; Kothe, Simon M.; Hintze, Wolfgang
  Subsequent synchronization of individual monitoring systems for machining of aircraft structures via a data collector using OPC UA - Conference Paper
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Publisher DOI
• Rost, Robert; Friedewald, Axel
  Consistent Maintenance Order Processing with Digital Assistance Systems - Conference Paper
  International Conference on Advances in Production Management Systems (APMS 2021)
  Publisher DOI
• Production at the leading edge of technology - Conference Proceedings
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  
• Engehausen, Friederike
  Modellierung und Auslegung der Reihenfolgebildung mit Rüstfamilien - Doctoral Thesis
  Wissen schafft Innovation 44: (2021)
  Open Access
• Rost, Robert
  Digitale Assistenzsysteme in der Industrie : Visualisierungskonzept - Working Paper
  Technische Universität Hamburg (2021)
  Open Access
• Mehnen, Jan Philipp; Hintze, Wolfgang
  Prozessüberwachung durch Machine Learning beim semi-automatischen Nietbohren in der Luftfahrtindustrie - Video
  METAV-Digital (2021)
  
• Hintze, Wolfgang; Rosenthal, Oliver; Hinrichs, Marco; Steinbach, Stefan
  Zerspanung von gesintertem Hartmetall : Grundlagen und Anwendung - Conference Paper
  Hanser Tagungen "Schwer zerspanbare Werkstoffe in der industriellen Praxis" (2021)
  
• Hintze, Wolfgang; Möller, Carsten; Romanenko, Denys; Junghans, Sebastian
  Adaptive Präzisionsbearbeitung additiv gefertigter Leichtbaustrukturen in der digitalisierten Prozesskette - Journal Article
  Unter Span: 42-43 (2021)
  
• Kothe, Simon M.; Diehl, B.; Niermann, Dirk; Chen, L.; Wolf, M.; Hintze, Wolfgang
  Automated Assembly of Thermoplastic Fuselage Structures for Future Aircrafts - Conference Paper
  Congress of the German Academic Association for Production Technology (WGP 2020)
  Publisher DOI
• Hintze, Wolfgang; Mehnen, Jan Philipp; Köttner, Lars; Romanenko, Denys
  Bohrprozess im Griff : halbautomatisches Bohren wird jetzt mit KI überwachbar - Journal Article
  Maschinenmarkt : a-1048320 (2021)
  
• Hintze, Wolfgang
  CFK-Bearbeitung - Book
  Springer-Verlag (2021)
  Publisher DOI
• Sikorra, Jan Niklas
  Frühzeitige Aufwands- und Terminschätzung der schiffbaulichen Unikatproduktion - Doctoral Thesis
  Wissen schafft Innovation 45: (2021)
  
• Wenserski, Robert von
  Helixfräsen und Bohren von laseradditiv gefertigten Bauteilen aus Titan für Luftfahrtanwendungen - Doctoral Thesis
  Wissen schafft Innovation 47: (2021)
  Open Access
• Schröder, Henrik
  Kompetenzentwicklung in der Montage mit Hilfe virtueller Technologien - Doctoral Thesis
  Wissen schafft Innovation 43: (2021)
  
• Haux, Moritz Alexander
  Modellierung von Unsicherheiten in der Planung der Unikatproduktion - Doctoral Thesis
  Wissen schafft Innovation 46: (2021)
  Open Access
• Winter, Michael; Luttkau, Alexander; Lödding, Hermann
  Produktionskennlinien mit Kapazitätsflexibilität - Journal Article
  WT Werkstattstechnik 111 (4): 190-194 (2021)
  Publisher DOI
• Friedewald, Axel; Köster, Nina; Elzalabany, Ahmed Mohamed Abdelmeguid
  Scheduling and visualization of acceptance tests and their dependencies for an augmented reality-based commissioning assistance system - Conference Paper
  20th International Conference on Computer and IT Applications in the Maritime Industries (COMPIT 2021)
  
• Lödding, Hermann; Koch, Christoph
  Value stream analysis and design for make-to-order companies - Journal Article
  Production Planning and Control 4 (32): 322-334 (2021)
  Publisher DOI
• Friedewald, Axel; Rost, Robert; Meluzov, Nikolaj; Lödding, Hermann
  WASSER - Wartung und Service von Schiffen mit erweiterter Realität - Conference Paper
  Jülich (2021)