Dr.-Ing. Nicolaj Baramsky

Ehemaliger Doktorand (2014–2019)

Publikationen

Baramsky, N.; Seibel, A.; Schlattmann, J.
Friction-Induced Vibrations during Tightening of Bolted Joints—Analytical and Experimental ResultsVibration 2018, 1, 312-337.

Baramsky, N.; Seibel, A.; Schlattmann, J.: 
Friction-induced vibrations during tightening of bolted joints: insights from a multi-body model. In: Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE), Paper ID 71267, Tampa, Florida, USA, 2017.

Baramsky, N.; Seibel, A.; Schlattmann, J.:
Influence of ultrasound on friction induced vibrations during tightening of bolted joints 
Proceedings in Applied Mathematics and Mechanics, 2017. 

Baramsky, N.; Seibel, A.; Schlattmann, J.: 
Modeling of friction-induced vibrations during tightening of bolted joints
Proceedings in Applied Mathematics and Mechanics, 16(1): 259-260 2016.

Möller, M.; Baramsky, N.; Ewald, A.; Emmelmann, C.; Schlattmann, J.:
Evolutionary-based Design and Control of Geometry Aims for AMD-manufacturing of Ti-6Al-4V Parts.
Physics Procedia, 83:733-742 2016.

Dr.-Ing. Viktor Krasmik

Ehemaliger Doktorand (2012–2017)

Publikationen

Krasmik, V.; Schlattmann, J.:
Influence of Ultrasonic Excitation of the Lubricating Fluid on the Friction and Wear Characteristics of Metal-Metal Pairings - A Preliminary Study.
4th International Tribology Symposium of IFToMM - ITS-IFToMM 2017, Jeju, Korea, 2017.

Krasmik, V.; Schlattmann, J.:
Study of the Friction and Wear Behavior of Metal/Polymer-Metal Multi-Material Configurations.
Key Engineering Materials, Engineering Tribology and Materials, 739:211–219, 2017.
Paper (Best Paper Award) presented at the International Conference on Engineering Tribology and Applied Technology (ICETAT2016).

Krasmik, V.; Schlattmann, J.:
An extended LuGre friction model incorporating frictional aging.
Proceedings in Applied Mathematics and Mechanics, 16(1):283–284, 2016.
Paper presented at the 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM2016).

Krasmik, V.; Röbken, N.; Martin, C.; Martin, P.; Schlattmann, J.:
Characterising the friction and wear behaviour of lubricated metal-metal pairings with an optical online particle detection system.
Lubrication Science (Early View), 2017.
Paper presented at the 20th International Colloquium Tribology 2016 (TAE).

Krasmik, V.; Schlattmann, J.:
Measuring human hair friction with a crossed fibres test setup.
Proceedings of Malaysian International Tribology Conference 2015 - MITC2015, pp. 60–61, Penang, Malaysia, 2015.

Krasmik, V.; Röbken, N.; Martin, C.; Martin, P.; Schlattmann, J.:
Time-resolved online detection of wear particles in an oil lubricated ball-on-prism test setup.
1st International Conference on Tribology - TURKEYTRIB'15, Istanbul, Turkey, 2015.

Krasmik, V.; Röbken, N.; Martin, C.; Martin, P.; Schlattmann, J.:
Zeitaufgelöste Verschleißpartikel-Untersuchung metallischer Paarungen an einem geschmierten Kugel/Prisma-Prüfsystem.
Fachtagung der Gesellschaft für Tribologie (GfT), Beitrag 35, Göttingen, 2015.

Krasmik, V.; Schlattmann, J.:
Friction and wear measurements with an adapted ball-on-pyramid test setup.
Tribology Online, 11(2):130–139, 2016.
Paper presented at the International Tribology Conference (ITC2015).

Krasmik, V.; Röbken, N.; Martin, C.; Martin, P.; Schlattmann, J.:
Real-time detection and optical analysis of wear particles in lubricated tribological systems.
11th Arnold Tross Colloquium, Hamburg University of Applied Sciences, Hamburg, Germany, 5th June 2015.

Krasmik, V.; Schlattmann, J.:
Experimental investigation of the friction and wear behaviour with an adapted ball-on-prism test setup.
Tribology in Industry, 37(3):291–298, 2015.
Paper presented at the 14th International Conference on Tribology (SERBIATRIB2015).

Krasmik, V.; Schlattmann, J.:
A dynamic friction model for the pre-sliding behavior of a tangentially loaded single asperity contact.
Proceedings in Applied Mathematics and Mechanics, 14(1):283–284, 2014.
Paper presented at the 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM2014).

Dr.-Ing. Philipp Hoffmann-Berling

Ehemaliger Doktorand (2013–2017)

 

 

Dr.-Ing. Steffen Vagts

Ehemaliger Doktorand (2009–2015)

Veröffentlichungen:

Vagts, S. ; Schlattmann, J.: General systems theory in a horizontal and vertical action process for cross-disciplinary knowledge transfer. In: Proceedings of ASME International Mechanical Engineering Congress and Exposition, San Diego, CA, USA, November 15-21, 2013, IMECE2013-64235.

Vagts, S. ; Haschke, H. ; Schlattmann, J. ; Kleinteich, T. ; Busshardt, P. ; Pullwitt, T. ; Gorb, S.: Towards understanding frictional properties of articular joints in beetle legs: µCT-based 3D model and multi-body simulation of joints kinematics. In: Proceedings of 5th World Tribology Congress, Torino, Italy, September 8-13, 2013. - ISBN 978-88-908185-09

Vagts, S. ; Schlattmann, J.: Entwicklung eines horizontalen und vertikalen Handlungsprozesses in der interdisziplinären Produktentwicklung - Heli-Act-Methode. In: Spath, D.; Bertsche, B.; Binz, H. (Hrsg.): Stuttgarter Symposium für Produktentwicklung 2013. Stuttgart, 2013. - ISBN 978-3-8396-0573-8

Vagts, S. ; Schlattmann, J. ; Busshardt, P. ; Kleinteich, T. ; Gorb, S.: The application of multi-body simulation approach in the kinematic analysis of beetle leg joints. Artificial Life and Robotics (2017).

 

 

Dr.-Ing. Hussein Shehata

Ehemaliger Doktorand 2009 - 2014

Veröffentlichungen:

H. H. Shehata and J. Schlattmann: “Mobile Robot Path Planning and Obstacle Avoidance Based on a Virtual Obstacle Concept“, Proceedings of the 21 International Conference on Flexible Automation and Intelligent Manufacturing, Vol. 2, No. 1, pp. 905-914, Taichung, Taiwan, 2011.

H. H. Shehata, A. El-Betar, M. Abdelhameed and F. Tolbah: "Artificial Neuro-Petri Net and its Application to the Design of a Controller for a Discrete Event Flexible Manufacturing System", Scientific Bulletin on Electrical Engineering part ΙΙ, Faculty of Engineering, Ain Shams University, ISSN 1110-1385, Vol. 39, No. 4, pp. 577-592, Dec., 2004.

H. H. Hussein, A. El-Betar, M. Abdelhameed, and F. Tolbah, "Dynamic Petri Net Based Discrete Event Controller," Scientific Bulletin on Electrical Engineering part ΙΙ, Faculty of Eng., Ain Shams University, ISSN 1110-1385, Vol. 38, No. 4, pp. 757-775, Dec. 2003.

H. H. Shehata, F. A.;Tolbah, M. M. Abdelhameed and A. Elbetar: "Design Methodology of a Mechatronic Sequential Control System", M.Sc. Thesis, Design and Production Engineering department, Faculty of Engineering, Ain Shams University, 2003.

H. H. Shehata; A. Khataab and A. El-Betar: "Design of a Test Rig for Measuring of Wear Rate and Friction", Technical Report of Graduate School of Engineering, Benha High Inst. of Technology, June 1995.

H. H. Shehata and H. Hafez: "Modern Machining Processes", Technical Report of Graduate School of Engineering, Benha High Inst. of Technology, Jan. 1995.

 

 

Dr.-Ing. Jürgen Allinger

Ehemaliger Doktorand 2001 - 2004

 

seit 09/2010 Produktstrategie Fahrzeuge BMW Group München

Veröffentlichungen:

Dissertation: "Methode zur Ermittlung und Verarbeitung relationaler Eigenschaften von Funktionselementen", Der Andere Verlag, ISBN: 3-89959-230-1

Dr.-Ing. Frank Burgard

Ehemaliger Doktorand 1999 - 2003

 

z.Zt. tätig bei Hella KG Hueck & Co. in Lippstadt

Veröffentlichungen:

Dissertation: "Ein Ansatz zur Bewältigung komplexer Selektionsentscheidungen im Rahmen der Entwicklung technischer Produkte", Der Andere Verlag, ISBN: 3-89959-150-X

Dr.-Ing. Olaf Hagemeier

Ehemaliger Doktorand 1998 - 2003

 

Veröffentlichungen:

Dissertation: "Ein ganzheitlicher Ansatz zur systematischen Integration von technischen Innovationen der Unterlieferanten in den Produktentwicklungsprozess", Der Andere Verlag, ISBN: 3-89959-105-4

Dr.-Ing. Jan Hampel

Ehemaliger Doktorand 1997 - 2001

 

seit 2002 beschäftigt bei der Industrie und Anlagenbetriebsgesellschaft mbH (IAGB) in Lichtenau

Veröffentlichungen:

Dissertation: "Systemorientierte Prozessoptimierung in der Konstruktion"

Dipl.-Ing. Andreas Japing

Ehemaliger Doktorand 2009 - 2013

z. Zt. tätig bei der Alfons Haar GmbH

Veröffentlichungen:

Japing, A.; Schlattmann, J.: Analyse der Topologie der Reibwirkflächen an Schraubenverbindungen. GfT-Fachtagung, Göttingen, 26-28 September, 2011.

Japing, A.; Schlattmann, J.: Bolted joints tribology, Encyclopedia of Lubricants and Lubrication, Springer-Verlag, Online-Publikation, 2012.

Japing, A.; Schlattmann, J.: Investigations of friction effective surface of screw connections. Arnold-Tross-Colloquium, Hamburg, 8. Juni 2012; ISBN 978-3-8440-1293-4

Japing, A.; Schlattmann, J.: Mechanical Models to Explain Stick-Slip during Tightening of Screw-Threaded Fasteners. International Tribology Conference, Veröffentlicht in den Proceedings, Hiroshima, Japan, Oktober 30 – November 3, 2011.

Dr.-Ing. Michael Meß

Ehemaliger Doktorand 2002 - 2006

 

Seit 2006 Vorentwicklungsleiter der Vibracoustic GmbH & Co. KG am Standort Hamburg

Veröffentlichungen:

Kleine Studienarbeit: "Verhalten von Makromolekülen in Scherströmungen unter dem Einfluss einer Schergefällegradienten"

Große Studienarbeit: "Fahrkomfort von Personenkraftwagen"

Diplomarbeit: "Entwicklung eines räumlichen Modells eines Transportluftschiffes während der Lastaustauschprozedur"

Dissertation: "Methodenbausteine zur Sensorauswahl und -integration im Maschinenbau"

Dr.-Ing. Stephan Schaefer

Ehemaliger Doktorand 1999 - 2005

 

seit 2002 Beschäftigung bei der Volkswagen AB in Wolfsburg als Applikateur in der Getriebeentwicklung

Veröffentlichungen:

Dissertation: "Grundlagenuntersuchung zur praxisnahen Stützungsberechnung eines stufenlosen Umschlingungsgetriebes", Der Andere Verlag, ISBN 3-89959-338-3

Dr.-Ing. Mekonnen Tesfay Tesfu

Ehemaliger Doktorand 2006 - 2012

 

Veröffentlichungen:

Dissertation: "Systematic Development of a Real-time Motion Control System for a Coupled Parallel Kinematics Robot"

Dr.-Ing. Dietmar Vogt

Ehemaliger Doktorand 2005 - 2011

 

seit 2008 Forschungsingenieur bei Airbus Group Innovation Works, Hamburg

Tel: ++49 (0)40 743 84252

Veröffentlichungen:

D. Vogt: Three-Dimensional Visualisation - VR, stereoscopic displays & co. Seminar of Engineering Design TUHH. Hamburg 2003.

D. Vogt: Visualisation of Simulation Results from Monte Carlo Method. 1st Workshop Incertitudes. Toulouse 2006.

D. Vogt, M. Olbert, J. Schlattmann: Uncertainty Management for Computer-Aided Engineering in Aircraft Cabin Development. 1st International Workshop on Aircraft System Technologies. Hamburg 2007.

D. Vogt, M. Olbert, R. Hartnack, J.Schlattmann: Uncertainty Assessment with Stochastic Simulation in Aircraft Cabin Development. 6th European LS-DYNA Conference. Gothenburg 2007.

M. Cappitelli, D. Vogt, M. Olbert: Design of experiments for simulated non-imaging light sources. Nonimaging Optics and Efficent Illumination Systems V. Edited by Roland Winston, R. John Koshel. Proceedings of SPIE. 2008. Vol. 7059.

S. Heimbs, D. Vogt, R. Hartnack, J. Schlattmann, M. Maier: Numerical simulation of aircraft interior components under crash loads. International Journal of Crashworthiness. 2008. Vol. 13, No. 5, pp. 511-521.

D.C. Vogt, S. Klostermann, J. Schlattmann, O. von Estorff: Stochastic simulation of aircraft cabin interior considering uncertain load conditions by modelling with random fields. NAFEMS 2020: North American Regional Summit. Hampton (VA, USA) 2008.

D.C. Vogt, S. Klostermann, J. Schlattmann, O. von Estorff: Simulation of aircraft cabin interior considering uncertain load conditions. NWC09: NAFEMS World Congress. Hersonissos (Crete, GR) 2009. ISBN: 978 1 874376 42 2. Best Paper Award

S. Klostermann, D.C. Vogt, J. Schlattmann, O. von Estorff: Simulation von Flugzeug-Kabinenkomponenten unter Berücksichtigung unscharfer Randbedingungen. Weimarer Optimierungs- und Stochastiktage 6.0. Weimar 2009.

S. Klostermann, M. Gehlken, D.C. Vogt, O. von Estorff, U. Weltin: Dynamic Simulation of a Phased-Array Radar Considering Earthquake Loads. ECCOMAS / IACM, ECCM 2010: 4th European Conference on Computational Mechanics. Paris (France) 2010.

D.C. Vogt: A New Method to Visualise Geometric Scatter from Stochastic Simulation Studies. EHTC 2010: 4th European HyperWorks Technology Conference. Versailles (France) 2010.

D.C. Vogt: Methods to Visualise Stochastic Simulation Results from Space and Time Discretised Models. NWC2011: NAFEMS World Congress. Boston (MA, USA) 2011. ISBN: 978 1 874376 53 8

S. Klostermann, D. Vogt, S. Lippert, O. von Estorff: Pattern Recognition Based Paremeterisation of Random Fields. 4th GACM Cololoquium on Computational Mechanics. Dresden 2011.

D.C. Vogt, S. Klostermann, M. Gehlken: Dynamic Simulation of a Phased-Array Radar Considering Earthquake Loads. 5th IC-SCCE: International Conference from Scientific Computing to Computational Engineering. Athens (GR). 2012.

Dr.-Ing. Webin (William) Yang

Ehemaliger Doktorand - 1999

 

Aktuell als Entwicklungsleiter der Firma Numet Engineering in Toronto, Kanada, tätig

Veröffentlichungen:

Dissertation: "Optimierung der Dämpfungseigenschaften von Faserverbundwerkstoffen an Industrierobotern (Hüllelemententwicklung)"

Dipl.-Ing. Lars Ziemen

Ehemaliger Doktorand 2005 - 2008

 

seit 2009 bei Blohm + Voss Industries, Hamburg

Veröffentlichungen:

Diplomarbeit: "Analyse und Optimierung der Hexapod-Kinematik eines zweibeinigen Roboters", (AmP)