Publikationen 2013

M. Joulaian, A. Düster:
Local enrichment of the finite cell method for problems with material interfaces.
Computational Mechanics, 52:741-762, 2013.

A. Abedian, J. Parvizian, A. Düster, E. Rank:
The Finite Cell Method for the J_2 flow theory of plasticity.
Finite Elements in Analysis and Design, 69:37-47, 2013.

R. Jänicke, H.-G. Sehlhorst, A. Düster, S. Diebels:
Micromorphic two-scale modelling of periodic grid structures.
International Journal for Multiscale Computational Engineering, 11(2):161-176, 2013

T. Netz, A. Düster, S. Hartmann:
High-order finite elements compared to low-order mixed element formulations.
ZAMM - Journal of Applied Mathematics and Mechanics, 93(2-3):163-176, 2013.

A. Abedian, J. Parvizian, A. Düster, H. Khademyzadeh, E. Rank:
Performance of different integration schemes facing discontinuities in the finite cell method.
International Journal of Computational Methods, 10(3):1350002/1-24, 2013.

M. Joulaian, A. Düster:
The hp-d version of the finite cell method with local enrichment for multiscale problems.
Proceedings in Applied Mathematics and Mechanics, 13:259-260, 2013.

P. Erbts, S. Rothe, A. Düster, S. Hartmann:
Energy-Conserving Data Transfer in the Partioned Treatment of Thermo-Viscoplastic Problems.
Proceedings in Applied Mathematics and Mechanics, 13:211-212, 2013.

S. Brändli, E. Höft, M. Abdel-Maksoud, A. Düster:
Simulation of the interaction of service ships with offshore wind turbine plants.
Proceedings of the Conference on Maritime Energy, pp 511-518, Hamburg, Germany, 2013.

S. Duczek, M. Joulaian, A. Düster, U. Gabbert:
Simulation of Lamb waves using the spectral cell method.
Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 86951U-1-86951U-11, 2013.

S. Heinze, H. Temmen, G. Kuhlmann, A. Düster:
Numerical homogenization of defects in composite materials.
Proceedings of SEICO 13 / 34th SAMPE Europe, International Technical Conference & Forum, pp 279-284, Paris, France, 2013.

B. Bohlmann; F. Boekhoff, M. Brinkmann, W. Fricke, T. Kontkanen, L. Molter, A. Nevierov, J. Peschmann, H. Remes, W. Sichermann:

Schwingfestigkeit von Laser- und Laserhybrid-Schweißungen.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

Crupi, V.; Fricke, W.; Friedrich, N.; Guglielmino, E.; Musumeci, L.; Paetzold, H.:
Experimental and numerical analysis of the low-cycle fatigue behavior of a web frame corner in ships.

Proc. of 7th Int. Conf. on Low Cycle Fatigue (LCF-7), Deutscher Verband für Materialforschung und –prüfung, Berlin

C. Fischer, W. Fricke:
Realistic fatigue life prediction of weld toe and weld root failure in load-carrying cruciform joints by crack propagation analysis.
In: Analysis and Design of Marine Structures (Eds.: C. Guedes Soares & J. Romanoff), 241-248, Taylor & Francis Group, London 2013

C. Fischer, W. Fricke, G. Meneghetti and C.M. Rizzo:
Fatigue strength assessment of HP stiffener joints with fillet-welded attachments using the peak stress method.
5th Int. Conf. on Computational Methods in Marine Engineering (MARINE 2013), B. Brinkmann & P. Wriggers (Eds.), 2013

Fricke, W.:
IIW Guideline for the assessment of weld root fatigue.
Welding in the World 57 (2013), 753-791, DOI 10.1007/s40194-013-0066-y

W. Fricke:
International Joint Master in Ship and Offshore Technology.
Ingenieurspiegel 2/2013, S. 71.

Fricke, W.; Codda, M.; Feltz, O.; Garbatov, Y.; Remes, H.; Risso, G.; Rizzo, C.; Romanoff, J.:
Round robin study on local stress and fatigue assessment of lap joints and doubler plates.
Ships and Offshore Structures 8 (2013), No. 6, 621-627.

Fricke, W.; Feltz, O.:
Consideration of influence factors between small-scale specimens and large components on the fatigue strength of thin-plated block joints in shipbuilding.
Fatigue & Fracture of Engineering Materials and Structures 36 (2013), 1223-123, DOI: 10.1111/ffe.12058

Fricke, W.; Friedrich, N.; Musumeci, L.; Paetzold, H.:
Low-Cycle Fatigue Analysis of a Web Frame Corner in Ship Structures.
IIW-Doc. XIII-2486-13, Int. Inst. of Welding 2013.

W. Fricke, B.Gerlach, M. Guiard:
Strukturverhalten großer Fenster an Bord von Schiffen.
CMT-Bericht 22/2013, Center of Maritime Technologies, Hamburg 2013

W. Fricke, S. Krüger, H. Dankowski, K. Werner:
Verbundvorhaben ELKOS: Verbesserung der Kollisionssicherheit durch Integration struktureller Maßnahmen in die Leckstabilitätsberechnung moderner RoRo-Fahrgastschiffe.
Tagungsband der Statustagung Maritime Technologien, Schriftenreihe Projektträger Jülich, 2013.

W. Fricke, H. Paetzold:
Effect of Whipping Stresses on the Fatigue Damage of Ship Structures.
IIW-Doc. XIII-2487-13, Int. Inst. of Welding 2013.

W. Fricke, H. Paetzold:
Experimental Investigations on Fatigue Damage of Ship Structures caused by Whipping Stresses.
Proc. of 12th Int. Symp. on Practical Design of Ships and Other Floating Structures (PRADS 2013, Eds. C.-S. Lee and S.-H. Van), Vol 1, 465-470, Korean Society of Naval Architects, Seoul 2013

W. Fricke, H. Remes, O. Feltz, I. Lillemäe, D. Tchuindjang, T. Reinert, A. Nevierov, W. Sichermann, M. Brinkmann, T. Kontkanen, B. Bohlmann, L. Molter:
Fatigue strength of laser-welded thin plate ship structures based on nominal and structural hot-spot stress approach.
In: Analysis and Design of Marine Structures (Eds.: C. Guedes Soares & J. Romanoff), 249-254, Taylor & Francis Group, London 2013

Fricke, W.; Tchuindjang, D.D.:
Fatigue strength behaviour of stud-arc welded joints in load-carrying ship structures.
Welding in the World 57 (2013), 495-506, DOI 10.1007/s40194-013-0043-5

W. Fricke, S. Zacke:
Application of Welding Simulation to Block Joints in Shipbuilding and Assessment of Welding-Induced Residual Stresses and Distortions.
Proc. of 12th Int. Symp. on Practical Design of Ships and Other Floating Structures (PRADS 2013, Eds. C.-S. Lee and S.-H. Van), Vol 1, 189-196, Korean Society of Naval Architects, Seoul 2013

Friedrich, N.; Musumeci, L.; Fricke, W.; Paetzold, H.:
Experimentelle und numerische Untersuchungen zum niedrigzyklischen Schwingfestigkeitsverhalten geschweißter Rahmenecken.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

B. Gerlach:
Untersuchungen zum Strukturverhalten von großen Schiffsfenstern.
Ingenieurspiegel 2/2013, 84-85.

B. Gerlach, W. Fricke:
Untersuchungen zum Struktur- und Tragverhalten großer Schiffsfenster.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

E. Lehmann:
Kollision und Grundberührung von Schiffen.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

H. Remes, W. Fricke:
Influencing factors on fatigue strength of welded thin-plates based on structural stress assessment.
IIW-Doc. XIII-2490-13, Int. Inst. of Welding 2013.

Rizzo, C.M.; Fischer, C.:
Application of advanced notch stress approaches to assess fatigue strength of ship structural details: benchmarks on complex geometries and laboratory tests.
Schriftenreihe Schiffbau 665, Technische Universität Hamburg-Harburg, Hamburg, 2013.

M. Schöttelndreyer:
Füllstoffe in der Konstruktion: Ein Konzept zur Verstärkung von Schiffsseitenhüllen im quasi-statischen Kollisionsversuch.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

M. Schöttelndreyer, I. Tautz, W. Fricke, E. Lehmann:
Side structure filled with multicellular glass hollow spheres in a quasi-static collision test.
In: Collision and Grounding of Ships and Offshore Structures n(Eds. J. Amdahl, S. Ehlers and B.J. Leira), 101-108, Taylor & Francis Group, London 2013.

Schöttelndreyer, M.; Tautz, I.; Fricke, W.; Werner, B.; Daske, C.; Heyer, H.; Sander, M.:
Experimental and numerical investigations of an alternative stiffening system for ship side structures to increase collision safety.
In: Analysis and Design of Marine Structures (Eds.: C. Guedes Soares & J. Romanoff), 199-207, Taylor & Francis Group, London 2013

I. Tautz:
Kollisionsfreundliche Bugwulststrukturen im Versuch und in der Berechnung.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

I. Tautz, M. Schöttelndreyer, J. Gauerke, E. Lehmann and W. Fricke:
Structural design of a bulbous bow with regard to collision safety.
5th Int. Conf. on Computational Methods in Marine Engineering (MARINE 2013), B. Brinkmann & P. Wriggers (Eds.), 2013

I. Tautz, M. Schöttelndreyer, E. Lehmann, W. Fricke:
Collision tests with rigid and deformable bulbous bows driven against double hull side structures.
In: Collision and Grounding of Ships and Offshore Structures n(Eds. J. Amdahl, S. Ehlers and B.J. Leira), 93-100, Taylor & Francis Group, London 2013.

B. Zipfel:
Strukturschäden bei Strandung.
Jahrbuch der Schiffbautechnischen Gesellschaft, 107. Bd. (2013), Schifffahrts-Verlag „Hansa“ C. Schroeder & Co., Hamburg (erscheint 2014).

Zipfel, B., Lehmann, E.:
Calculation of a stranding scenario.
In: Collision and Grounding of Ships and Offshore Structures (Eds. J. Amdahl, S. Ehlers and B.J. Leira), 127-134, Taylor & Francis Group, London 2013.