Veröffentlichungen

2019

  • Bosbach, Björn and Baytekin-Gerngross, Melike and Sprecher, Eike and Wegner, Johann and Gerngross, Mark-Daniel and Carstensen, Jürgen and Adelung, Rainer and Fiedler, Bodo (2019). Maximizing bearing fatigue lifetime and CAI capability of fibre metal laminates by nanoscale sculptured Al plies. Composites Part A: Applied Science and Manufacturing. 117 144--155. [doi] [BibTex]

  • Doblies, Audrius and Boll, Benjamin and Fiedler, Bodo (2019). Prediction of Thermal Exposure and Mechanical Behavior of Epoxy Resin Using Artificial Neural Networks and Fourier Transform Infrared Spectroscopy. Polymers. 11 (2), [Abstract] [doi] [BibTex]

  • Ghimpu, Lidia and Lupan, Oleg and Postica, Vasile and Strobel, Julian and Kienle, Lorenz and Terasa, Maik-Ivo and Mintken, Mona and Tiginyanu, Ion and Marx, Janik and Fiedler, Bodo and Adelung, Rainer (2019). Individual CdS-covered aerographite microtubes for room temperature VOC sensing with high selectivity. Materials Science in Semiconductor Processing. 100 275--282. [doi] [BibTex]

  • Gibhardt and Doblies and Meyer and Fiedler (2019). Effects of Hygrothermal Ageing on the Interphase, Fatigue, and Mechanical Properties of Glass Fibre Reinforced Epoxy. Fibers. 7 (6), 55. [doi] [BibTex]

  • Harder, S. and Schmutzler, Henrik and Hergoss, Philipp and Freese, Jens and Holtmannspötter, Jens and Fiedler, Bodo (2019). Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces. Composites Part A: Applied Science and Manufacturing. 121 299--307. [Abstract] [doi] [BibTex]

  • Koch, Ilja and Just, Gordon and Brod, Martin and Chen, Jiuheng and Doblies, Audrius and Dean, Aamir and Gude, Maik and Rolfes, Raimund and Hopmann, Christian and Fiedler, Bodo (2019). Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading. Materials (Basel, Switzerland). 12 (11), [Abstract] [doi] [BibTex]

  • Leopold, Christian and Just, Gordon and Koch, Ilja and Schetle, Andreas and Kosmann, Julia B. and Gude, Maik and Fiedler, Bodo (2019). Damage mechanisms of tailored few-layer graphene modified CFRP cross-ply laminates. Composites Part A: Applied Science and Manufacturing. 117 332--344. [doi] [BibTex]

  • Marx, J. and Lewke, M.R.D. and Smazna, D. and Mishra, Y. K. and Adelung, R. and Schulte, K. and Fiedler, B. (2019). Processing, growth mechanism and thermodynamic calculations of carbon foam with a hollow tetrapodal morphology -- Aerographite. Applied Surface Science. 470 535--542. [doi] [BibTex]

  • Marx, J. and Roth, S. and Brouschkin, A. and Smazna, D. and Mishra, Y. K. and Schulte, K. and Adelung, R. and Fiedler, B. (2019). Tailored crystalline width and wall thickness of an annealed 3D carbon foam composites and its mechanical property. Carbon. 142 60--67. [doi] [BibTex]

  • Marx, Janik and Berns, Jan-Christoph and Spille, Claas and Mintken, Mona and Adelung, Rainer and Schlüter, Michael and Fiedler, Bodo (2019). Theoretical Computational Fluid Dynamics Study of the Chemical Vapor Deposition Process for the Manufacturing of a Highly Porous 3D Carbon Foam. Chemical Engineering & Technology. 42 (6), 1240--1246. [doi] [BibTex]

  • Meeuw, H. and Wisniewski, V. K. and Köpke, U. and Nia, A. S. and Vázquez, A. R. and Lohe, M. R. and Feng, X. and Fiedler, B. (2019). In-line monitoring of carbon nanoparticle epoxy dispersion processes. Production Engineering. 51 (4), 585. [Abstract] [doi] [BibTex]

  • Meeuw, Hauke and Körbelin, Johann and Wisniewski, Valea and Nia, Ali and Vázquez, Adrián and Lohe, Martin and Feng, Xinliang and Fiedler, Bodo (2019). Carbon Nanoparticles' Impact on Processability and Physical Properties of Epoxy Resins---A Comprehensive Study Covering Rheological, Electrical, Thermo-Mechanical, and Fracture Properties (Mode I and II). Polymers. 11 (2), 231. [Abstract] [doi] [BibTex]

  • Plunkett, Alexander and Kröning, Katharina and Fiedler, Bodo (2019). Highly Optimized Nitrogen-Doped MWCNTs through In-Depth Parametric Study Using Design of Experiments. Nanomaterials (Basel, Switzerland). 9 (4), [Abstract] [doi] [BibTex]

  • Schuett, M. and Karsten, J. and Schott, L. and Wittich, H. and Schulte, K. and Fiedler, B. (2019). Experimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loading. CEAS Aeronautical Journal. 10 (2), 565--587. [Abstract] [doi] [BibTex]

  • Studer, Julia and Dransfeld, Clemens and {Jauregui Cano}, Jon and Keller, Andre and Wink, Marianne and Masania, Kunal and Fiedler, Bodo (2019). Effect of fabric architecture, compaction and permeability on through thickness thermoplastic melt impregnation. Composites Part A: Applied Science and Manufacturing. 122 45--53. [doi] [BibTex]

  • Taale, Mohammadreza and Krüger, Diana and Ossei-Wusu, Emmanuel and Schütt, Fabian and {Ur Rehman}, Muhammad Atiq and Mishra, Yogendra Kumar and Marx, Janik and Stock, Norbert and Fiedler, Bodo and Boccaccini, Aldo R. and Willumeit-Römer, Regine and Adelung, Rainer and Selhuber-Unkel, Christine (2019). Systematically designed periodic electrophoretic deposition for decorating 3D carbon-based scaffolds with bioactive nanoparticles. ACS Biomaterials Science & Engineering. [doi] [BibTex]

  • Taale, Mohammadreza and Schütt, Fabian and Carey, Tian and Marx, Janik and Mishra, Yogendra Kumar and Stock, Norbert and Fiedler, Bodo and Torrisi, Felice and Adelung, Rainer and Selhuber-Unkel, Christine (2019). Biomimetic Carbon Fiber Systems Engineering: A Modular Design Strategy To Generate Biofunctional Composites from Graphene and Carbon Nanofibers. ACS applied materials & interfaces. 11 (5), 5325--5335. [Abstract] [doi] [BibTex]

2018

  • Augustin, T. and Karsten, J. and Fiedler, B. (2018). Detection and localization of impact damages in carbon nanotube--modified epoxy adhesive films with printed circuits. Structural Health Monitoring: An International Journal. in press. [Abstract] [BibTex]

  • Augustin, T. and Karsten, J. and Kötter, B. and Fiedler, B. (2018). Health monitoring of scarfed CFRP joints under cyclic loading via electrical resistance measurements using carbon nanotube modified adhesive films. Composites Part A: Applied Science and Manufacturing. 105 150--155. [Abstract] [doi] [BibTex]

  • Backes, E. and Passador, F. and Leopold, C. and Fiedler, B. and Pessan, L. (2018). Electrical, thermal and thermo-mechanical properties of epoxy/multi-wall carbon nanotubes/mineral fillers nanocomposites. Journal of Composite Materials. in press. [Abstract] [doi] [BibTex]

  • Bosbach, B. and Ohle, C. and Fiedler, B. (2018). Structural health monitoring of fibre metal laminates under mode I and II loading. Composites Part A: Applied Science and Manufacturing. 107 471--478. [Abstract] [doi] [BibTex]

  • Bosbach, Björn and Baytekin-Gerngross, Melike and Heyden, Emil and Gerngross, Mark-Daniel and Carstensen, Jürgen and Adelung, Rainer and Fiedler, Bodo (2018). Reaching maximum inter-laminar properties in GFRP/nanoscale sculptured aluminium ply laminates. Composites Science and Technology. 167 32--41. [BibTex]

  • Drücker, S. and Inman, S. and Fiedler, B. (2018). Simulation and Optimization of the Load Introduction Geometry of Additively Manufactured Lattice Structure Specimens. ECCM18 - 18th European Conference on Composite Materials. [BibTex]

  • Harder, S. and Goralski, P. and Scharnagl, N. and Hergoss, P. and Schmutzler, H. and Fiedler, B. (2018). Effect of laser surface treatment on the adhesive properties of bonded CFRP joints. 18th European Conference on Composite Materials (ECCM18). [Abstract] [BibTex]

  • Jia, Yunlong and Fiedler, Bodo (2018). Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites. Fibers. 6 (3), 59. [doi] [BibTex]

  • Körbelin, Johann and Derra, Manuel and Fiedler, Bodo (2018). Influence of temperature and impact energy on low velocity impact damage severity in CFRP. Composites Part A: Applied Science and Manufacturing. 115 76--87. [Abstract] [doi] [BibTex]

  • Leopold, Christian and Harder, S. and Philipkowski, Timo and Liebig, Wilfried V. and Fiedler, Bodo (2018). Comparison of Analytical Approaches Predicting the Compressive Strength of Fibre Reinforced Polymers. Materials (Basel, Switzerland). 11 (12), [Abstract] [doi] [BibTex]

  • Marx, J. and Brouschkin, A. and Roth, S. and Smazna, D. and Mishra, Y. K. and Wittich, H. and Schulte, K. and Adelung, R. and Fiedler, B. (2018). Fundamentals of the temperature-dependent electrical conductivity of a 3D carbon foam---Aerographite. Synthetic Metals. 235 145--152. [Abstract] [doi] [BibTex]

  • Marx, J. and Wilhelmy, F. and Beisch, H. and Fiedler, B. (2018). Manufacturing of a hierarchical carbon foam with tailored catalytically Me/Me x O y particles. Vacuum. 155 490--495. [Abstract] [doi] [BibTex]

  • Meeuw, H. and Körbelin, J. and von Bernstorff, D. and Augustin, T. and Liebig, W. V. and Fiedler, B. (2018). Smart dispersion: Validation of OCT and impedance spectroscopy as solutions for in-situ dispersion analysis of CNP/EP-composites. Materialia. 1 185--197. [Abstract] [doi] [BibTex]

  • Meeuw, Hauke and Wisniewski, Valea and Fiedler, Bodo (2018). Frequency or Amplitude?---Rheo-Electrical Characterization of Carbon Nanoparticle Filled Epoxy Systems. Polymers. 10 (9), 999. [Abstract] [doi] [BibTex]

  • Plesco, Irina and Strobel, Julian and Schütt, Fabian and Himcinschi, Cameliu and {Ben Sedrine}, Nabiha and Monteiro, Teresa and Correia, Maria Rosário and Gorceac, Leonid and Cinic, Boris and Ursaki, Veaceslav and Marx, Janik and Fiedler, Bodo and Mishra, Yogendra Kumar and Kienle, Lorenz and Adelung, Rainer and Tiginyanu, Ion (2018). Hierarchical Aerographite 3D flexible networks hybridized by InP micro/nanostructures for strain sensor applications. Scientific reports. 8 (1), 13880. [Abstract] [doi] [BibTex]

  • Schuett, M. and Karsten, J. and Schott, L. and Wittich, H. and Schulte, K. and Fiedler, B. (2018). Experimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loading. CEAS Aeronautical Journal. 24 (1), 39. [Abstract] [doi] [BibTex]

  • Smazna, D. and Shree, S. and Hoppe, M. and Hansen, L. and Marx, J. and Dittman, J. and Zaho, K. and Fiedler, B. and Holger, K. and Adelung, R. (2018). Surface modification of highly porous 3D networks via atmospheric plasma treatment. Contributions to Plasma Physics. 14 (3), 1600137. [doi] [BibTex]

  • Würger, Tim and Heckel, Wolfgang and Sellschopp, Kai and Müller, Stefan and Stierle, Andreas and Wang, Yuemin and Noei, Heshmat and Feldbauer, Gregor (2018). Adsorption of Acetone on Rutile TiO 2 : A DFT and FTIRS Study. The Journal of Physical Chemistry C. 122 (34), 19481--19490. [Abstract] [doi] [BibTex]

2017

  • Augustin, T. and Fiedler, B. (2017). Health monitoring of CFRP using printed circuits. JEC Composites Magazine. (117), 61--63. [Abstract] [BibTex]

  • Augustin, T. and Grunert, D. and Langner, H. H. and Haverkamp, V. and Fiedler, B. (2017). Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink. Advanced Manufacturing: Polymer & Composites Science. 3 (3), 110--119. [Abstract] [doi] [BibTex]

  • Augustin, T. and Karsten, J. and Fiedler, B. (2017). Impact Damage Detection and Localization of Adhesively Bonded Fiber Reinforced Structures using Silver Nanoparticle Based Printed Circuits. Structural Health Monitoring 2017. 1461--1468. [Abstract] [BibTex]

  • Bosbach, B. and Ohle, C. and Fiedler, B. (2017). Structural Health Monitoring of Multifunctional Fibre Metal Laminates under Mode I Loading. Structural Health Monitoring 2017. 1976--1983. [BibTex]

  • Drücker, S. and Schneider, K. and Ghothra, N.-K. and Bargmann, S. (2017). Finite element simulation of pole vaulting. Sports Engineering. 9 (2), 123. [doi] [BibTex]

  • Drücker, S. and Wilmers, J. and Bargmann, S. (2017). Influence of the microstructure on effective mechanical properties of carbon nanotube composites. Coupled systems mechanics. 6 (1), 1--15. [doi] [BibTex]

  • Garlof, S. and Mecklenburg, M. and Smazna, D. and Mishra, Y. K. and Adelung, R. and Schulte, K. and Fiedler, B. (2017). 3D carbon networks and their polymer composites: Fabrication and electromechanical investigations of neat Aerographite and Aerographite-based PNCs under compressive load. Carbon. 111 103--112. [Abstract] [doi] [www] [BibTex]

  • Harder, S. and Grossheider, K. and Hergoss, P. and Schmutzler, H. and Fiedler, B. (2017). Ytterbium Fibre Laser Surface Pre-Treatment of CFRP Soft Patch Repairs. SAMPE Conference 2017 Stuttgart. [Abstract] [BibTex]

  • Heckel, Wolfgang and Würger, Tim and Müller, Stefan and Feldbauer, Gregor (2017). Van der Waals Interaction Really Matters: Energetics of Benzoic Acid on TiO 2 Rutile Surfaces. The Journal of Physical Chemistry C. 121 (32), 17207--17214. [Abstract] [doi] [BibTex]

  • Leopold, C. and Augustin, T. and Schwebler, T. and Lehmann, J. and Liebig, W. V. and Fiedler, B. (2017). Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes. Journal of Colloid and Interface Science. 506 620--632. [Abstract] [doi] [BibTex]

  • Leopold, C. and Augustin, T. and Schwebler, T. and Liebig, W. V. and Wittich, H. and Fiedler, B. (2017). Influence of carbon nanoparticle geometry in epoxy matrix on mechanical properties and failure initiation regarding the size effect. 21st International Conference on Composite Materials (ICCM). [Abstract] [BibTex]

  • Leopold, C. and Schetle, A. and Kosmann, J. and Fiedler, B. (2017). Ply-tailored nanoparticle matrix modification in cross-ply CFRP laminates. 21st International Conference on Composite Materials (ICCM). [Abstract] [BibTex]

  • Leopold, C. and Schütt, M. and Liebig, W. V. and Philipkowski, T. and Kürten, J. and Schulte, K. and Fiedler, B. (2017). Compression Fracture of CFRP Laminates Containing Stress Intensifications. Materials (Basel, Switzerland). 10 (9), [Abstract] [doi] [BibTex]

  • Lupan, O. and Postica, V. and Marx, J. and Mecklenburg, M. and Mishra, Y. K. and Schulte, K. and Fiedler, B. and Adelung, R. (2017). Individual hollow and mesoporous aero-graphitic microtube based devices for gas sensing applications. Applied Physics Letters. 110 (26), 263109. [doi] [BibTex]

  • Marx, J. and Beisch, H. and Garlof, S. and Fiedler, B. (2017). Structural improvement of a bio-inspired 3D globular carbon foam by a continuously thermal treatment: A comprehensive study. Advanced Material Science. (in press), [doi] [BibTex]

  • Marx, J. and Garlof, S. and Timmermann, J. and Smazna, D. and Adelung, R. and Schulte, K. and Fiedler, B. (2017). Growth model of a carbon based 3D structure (Aerographite) and electrical/mechanical properties of composites. 21st International Conference on Composite Materials (ICCM). [BibTex]

  • Meija, R. and Signetti, S. and Schuchardt, A. and Meurisch, K. and Smazna, D. and Mecklenburg, M. and Schulte, K. and Erts, D. and Lupan, O. and Fiedler, B. and Mishra, Y. K. and Adelung, R. and Pugno, N. M. (2017). Nanomechanics of individual aerographite tetrapods. Nature communications. 8 14982. [Abstract] [doi] [BibTex]

  • Rana, S. and Fangueiro, R. and Thakur, V. K. and Joshi, M. and Thomas, S. and Fiedler, B. (2017). Nanomaterials from Natural Products for Industrial Applications. Journal of Nanomaterials. 2017 1--2. [doi] [BibTex]

2016

  • Augustin, T. and Langner, H. and Haverkamp, V. and Fiedler, B. (2016). Online-monitoring of carbon fiber reinforced plastics using silver nanoparticle based ink. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Bosbach, B. and Meeuw, H. and Fiedler, B. (2016). Characterisation of fibre-metal-laminates under bearing loading. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Chandrasekaran, S. and Liebig, W.. and Mecklenburg, M. and Fiedler, B. and Smazna, D. and Adelung, R. and Schulte, K. (2016). Fracture, failure and compression behaviour of a 3D interconnected carbon aerogel (Aerographite) epoxy composite. Composites Science and Technology. 122 50--58. [Abstract] [doi] [www] [BibTex]

  • Garlof, S. and Fiedler, B. (2016). Template-free, facile synthesis of core-shell carbon networks. 4th international conference on Nanomechanics and Nanocomposites (ICNN 4). [www] [BibTex]

  • Garlof, S. and Fukuda, T. and Mecklenburg, M. and Smazna, D. and Mishra, Y. K. and {Adelung, R. Schulte, K.} and Fiedler, B. (2016). Electro-mechanical piezoresistive properties of three dimensionally interconnected carbon aerogel (Aerographite)-epoxy composites. Composites Science and Technology. 134 226--233. [Abstract] [doi] [www] [BibTex]

  • Garlof, S. and Mecklenburg, M. and Adelung, R. and Smazna, D. and Fiedler, B. and Schulte, K. (2016). Electrical and thermal conductivity of aerogel/epoxy composites. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Jiang, B. and Peng, H. and Wu, W. and Jia, Y. and Zhang, Y. (2016). Numerical Simulation and Experimental Investigation of the Viscoelastic Heating Mechanism in Ultrasonic Plasticizing of Amorphous Polymers for Micro Injection Molding. Polymers. 8 (5), 199. [Abstract] [doi] [www] [BibTex]

  • Johannsen, I. and Jaksik, K. and Wirch, N. and Pötschke, P. and Fiedler, B. and Schulte, K. (2016). Electrical conductivity of melt-spun thermoplastic poly(hydroxy ether of bisphenol A) fibres containing multi-wall carbon nanotubes. Polymer. 97 80--94. [doi] [www] [BibTex]

  • Lamprecht, C. and Taale, M. and Paulowicz, I. and Westerhaus, H. and Grabosch, C. and Schuchardt, A. and Mecklenburg, M. and Bottner, M. and Lucius, R. and Schulte, K. and Adelung, R. and Selhuber-Unkel, C. (2016). A Tunable Scaffold of Microtubular Graphite for 3D Cell Growth. ACS applied materials & interfaces. 8 (24), 14980--14985. [Abstract] [doi] [www] [BibTex]

  • Leopold, C. and Harder, S. and Buggisch, C. and Liebig, W. and Fiedler, B. (2016). Influence of 90°-layer thickness on damage initiation and propagation in cfrp cross-ply laminates. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Leopold, C. and Liebig, W. and Wittich, H. and Fiedler, B. (2016). Influence of graphene nanoparticles on the size effect of epoxy matrix. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Leopold, C. and Liebig, W. V. and Wittich, H. and Fiedler, B. (2016). Size effect of graphene nanoparticle modified epoxy matrix. Composites Science and Technology. 134 217--225. [doi] [BibTex]

  • Leopold, Christian and Liebig, Wilfried V. and Fiedler, Bodo (2016). Damage initiation and failure mechanisms at nanoparticles in polymer nanocomposites with regard to the size effect: 4th international conference on Nanomechanics and Nanocomposites (ICNN 4). [BibTex]

  • Liebig, W. V. and Leopold, C. and Hobbiebrunken, T. and Fiedler, B. (2016). New test approach to determine the transverse tensile strength of CFRP with regard to the size effect. Composites Communications. 1 54--59. [doi] [BibTex]

  • Liebig, W. V. and Schulte, K. and Fiedler, B. (2016). Hierarchical analysis of the degradation of fibre-reinforced polymers under the presence of void imperfections. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 374 (2071), 20150279. [doi] [www] [BibTex]

  • Lupan, O. and Postica, V. and Mecklenburg, M. and Schulte, K. and Mishra, Y. K. and Fiedler, B. and Adelung, R. (2016). Low powered, tunable and ultra-light aerographite sensor for climate relevant gas monitoring. J. Mater. Chem. A. 4 (42), 16723--16730. [doi] [BibTex]

  • Marx, J. and Smazna, D. and Adelung, R. and Fiedler, B. (2016). Manufacturing and characterisation of n- doped three dimensional graphitic structures. 4th international conference on Nanomechanics and Nanocomposites (ICNN 4). [Abstract] [www] [BibTex]

  • Protz, R. and Kosmann, N. and Fritsch, D. and Fey, P. and Essig, W. and Dietrich, K. and Gude, M. and Horst, P. and Kreutzbruck, M. and Schulte, K. and Busse, G. and Hufenbach, W. and Fiedler, B. (2016). Influence of voids and impact damage on the fatigue behaviour of large scale composites. Materialwissenschaft und Werkstofftechnik. 47 (11), 1058--1071. [doi] [BibTex]

  • Riecken, B. and Fiedler, B. (2016). Investigation of the thermal conductivity of hexagonal boron nitride epoxy composites. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Schnoor, T. and Vainio, Ulla and Shao, Li-Hua and Lilleodden, Erica T. and Müller, Martin and Schreyer, Andreas and Schulte, Karl and Fiedler, Bodo (2016). Nanostructured MWCNT/Polypyrrole Actuators with Anisotropic Strain Response. Advanced Engineering Materials. 18 (4), 597--607. [Abstract] [doi] [www] [BibTex]

  • Studer, J. and Dransfeld, C. and Fiedler, B. (2016). Direct thermoplastic melt impregnation of carbon fibre fabrics by injection moulding. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Tiginyanu, Ion and Ghimpu, Lidia and Grottrup, Jorit and Postolache, Vitalie and Mecklenburg, Matthias and Stevens-Kalceff, Marion A. and Ursaki, Veaceslav and Payami, Nader and Feidenhansl, Robert and Schulte, Karl and Adelung, Rainer and Mishra, Yogendra Kumar (2016). Strong light scattering and broadband (UV to IR) photoabsorption in stretchable 3D hybrid architectures based on Aerographite decorated by ZnO nanocrystallites. Scientific reports. 6 32913. [Abstract] [doi] [BibTex]

  • Wu, Wangqing and Peng, Huajian and Jia, Yunlong and Jiang, Bingyan (2016). Characteristics and mechanisms of polymer interfacial friction heating in ultrasonic plasticization for micro injection molding. Microsystem Technologies. [doi] [www] [BibTex]

2015

  • Bosbach, B. and Liebig, W. and Fiedler, B. (2015). Bearing response of fibre metal laminates consisting of GFRP and woven metallic fabrics. 20th International Conference on Composite Materials. [Abstract] [www] [BibTex]

  • Chandrasekaran, S. and Liebig, W. and Mecklenburg, M. and Fiedler, B. and Adelung, R. and Schulte, K. (2015). Failure mechanisms, electrical and thermal conductivity of aerographite/epoxy composite. 20th International Conference on Composite Materials. [Abstract] [www] [BibTex]

  • Fiedler, B. and Kosmann, N. and Fritsch, D. and Schulte, K. (2015). Influence of impact damage on the fatigue behaviour of large scale composites. 20th International Conference on Composite Materials. [Abstract] [www] [BibTex]

  • Fiedler, B. and Schütt, M. and Wittich, H. and Schulte, K. (2015). Investigation on the failure mechanisms of thermoplastic composites fasteners in single-lap shear joints under fatigue loading. 14th Japanese-European Symposium on Composite Materials. [BibTex]

  • Koch, I. and Just, G. and Gude, M. and Fiedler, B. (2015). Inter fibre cracking behaviour of CFRP under very high cycle fatigue loading: International Conference on Fatigue of Composites (ICFC). [BibTex]

  • Kosmann, N. and Karsten, J. M. and Schuett, M. and Schulte, K. and Fiedler, B. (2015). Determining the effect of voids in GFRP on the damage behaviour under compression loading using acoustic emission. Composites Part B: Engineering. 70 184--188. [Abstract] [doi] [www] [BibTex]

  • Kramer, E. and Dransfeld, C. and Liebig, W. and Fiedler, B. (2015). Influence of curing conditions on mechanical properties of epoxy matrix systems. Thermosets 2015. [Abstract] [BibTex]

  • Leopold, C. and Liebig, W. and Harder, S. and Fiedler, B. (2015). Influence of ply thickness on the fibre matrix debonding: 20th International Conference on Composite Materials (ICCM 20). [Abstract] [www] [BibTex]

  • Liebig, W. and Schulte, K. and Fiedler, B. (2015). A micromechanical approach to investigate the influence of voids on the structural behaviour of FRP under compression loading. 20th International Conference on Composite Materials. [Abstract] [www] [BibTex]

  • Liebig, W.. and Viets, C. and Schulte, K. and Fiedler, B. (2015). Influence of voids on the compressive failure behaviour of fibre-reinforced composites. Composites Science and Technology. 117 225--233. [doi] [BibTex]

  • Loos, M.. and Schulte, K. (2015). Chapter 8 - Is It Worth the Effort to Reinforce Polymers with Carbon Nanotubes?. 207--232. [Abstract] [doi] [www] [BibTex]

  • Mecklenburg, M. and Mizushima, D. and Ohtake, N. and Bauhofer, W. and Fiedler, B. and Schulte, K. (2015). On the manufacturing and electrical and mechanical properties of ultra-high wt.{\%} fraction aligned MWCNT and randomly oriented CNT epoxy composites. Carbon. 91 275--290. [Abstract] [doi] [www] [BibTex]

  • Protz, R. and Kosmann, N. and Gude, M. and Hufenbach, W. and Schulte, K. and Fiedler, B. (2015). Voids and their effect on the strain rate dependent material properties and fatigue behaviour of non-crimp fabric composites materials. Composites Part B: Engineering. 83 346--351. [doi] [BibTex]

  • Schuchardt, A. and Braniste, T. and Mishra, Y. and Deng, M. and Mecklenburg, M. and Stevens-Kalceff, M. and Raevschi, S. and Schulte, K. and Kienle, L. and Adelung, R. and Tiginyanu, I. (2015). Three-dimensional Aerographite-GaN hybrid networks: Single step fabrication of porous and mechanically flexible materials for multifunctional applications. Scientific Reports. 5 8839. [Abstract] [doi] [www] [BibTex]

  • Schulte, K. (2015). Foreword. In Carbon Nanotube Reinforced Composites. 11. [doi] [www] [BibTex]

  • Schulte, K. and Chandrasekaran, S. and Viets, C. and Fiedler, B. (2015). New functions in polymer composites using a nanoparticle-modified matrix. In: Multifunctionality of Polymer Composites: Challenges and New Solutions. Chapter 30 875--902. [BibTex]

  • Shen, J. and Buschhorn, S. and Hosson, J. and Schulte, K. and Fiedler, B. (2015). Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites. Composites Science and Technology. 115 1--8. [Abstract] [doi] [www] [BibTex]

2014

  • Chandrasekaran, S. and Sato, N. and Tölle, F. and Mülhaupt, R. and Fiedler, B. and Schulte, K. (2014). Fracture toughness and failure mechanism of graphene based epoxy composites. Composites Science and Technology. 97 90--99. [Abstract] [doi] [www] [BibTex]

  • Fritsch, D. and Viets, C. and Mannov, E. and Schulte, K. and Fiedler, B. (2014). Nanocomposite Based Structural Health Monitoring Approaches for Fibre Reinforced Polymers - On Doorstep to Industrial Relevance after Two Decades of Intense Research?. 7th European Workshop on Structural Health Monitoring. [Abstract] [www] [BibTex]

  • Knoll, J. and Just, G. and Koch, I. and Koschichow, R. and Fiedler, B. (2014). To the fatigue mechanisms of nanopartikel modified carbon fibre reinforced epoxy and its characterization: Material Science and Engineering (MSE). [BibTex]

  • Knoll, J. B. and Koch, I. and Schulte, K. and Gude, M. and Fiedler, B. (2014). Damage mechanisms of nanoparticle-modified CFRP under very high cycle fatigue-loading. [Abstract] [www] [BibTex]

  • Knoll, J. B. and Riecken, B. T. and Kosmann, N. and Chandrasekaran, S. and Schulte, K. and Fiedler, B. (2014). The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy. Composites Part A: Applied Science and Manufacturing. 67 233--240. [Abstract] [doi] [www] [BibTex]

  • Kosmann, N. and Riecken, B. T. and Schmutzler, H. and Knoll, J. B. and Schulte, K. and Fiedler, B. (2014). Evaluation of a critical impact energy in GFRP under fatigue loading. Composites Science and Technology. 102 28--34. [Abstract] [doi] [www] [BibTex]

  • Kosmann, N. and Schmutzler, H. and Schulte, K. and Fiedler, B. (2014). Influence of impact damages on the fatigue behaviour of composites. 16th European Conference on Composite Materials, ECCM 2014. [Abstract] [www] [BibTex]

Anzeige der Ergebnisse 1 to 100 von 281

Seite 1

Seite 2

Seite 3

Vorwärts >