2023

• Design guidelines for metal binder jetting - Journal Article
  Blunk, Heiko; Seibel, Arthur
  Progress in Additive Manufacturing (in Press) : (2023)
  Open Access | Verlags DOI
• Frictional material selection of dry clutch disc based on the weighted factor and finite element methods - Journal Article
  Doos, Qasim M.; Hussain, Ihsan Y.; Al-Sahb, Wassan Abd; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel
  Heat Transfer 52 (3): 2838-2858 (2023-05)
  Verlags DOI
• Removability of support structures in laser powder bed fusion of Ti-6Al-4V - Conference Paper
  Maiwald, Maria Isabelle; Bartsch, Katharina; Röver, Tim; Emmelmann, Claus
  19th Rapid.Tech 3D Conference (2023-05)
  Verlags DOI
• A systematic approach to stable grasping of a two-finger robotic hand activated by jamming of granular media - Journal Article
  Fakhri, Osamah; Youssef, George; Nacy, Somer M.; Al-Tamimi, Adnan Naji Jameel; Hussein, O.; Abbood, Wisam T.; Abdullah, Oday Ibraheem; Al-Karkhi, Nazar Kais
  Electronics 12 (8): 1902 (2023)
  Open Access | Verlags DOI
• A new correlation for solar radiation incidence angle and dust accumulation of photovoltaic PV systems - Journal Article
  Obaid, Nibras M.; Sultan, Hakim S.; Abed, Azher M.; Jweeg, Muhsin Jaber; Kadhim, A. M.; Abdullah, Oday I.
  Environmental Research, Engineering and Management 79 (1): 56-68 (2023)
  Open Access | Verlags DOI
• Analysis of modified finite length journal bearing under position perturbation - Journal Article
  Jamali, Hazim U.; Aljibori, Hakim S. Sultan; Abdullah, Oday Ibraheem; Al-Tamimi, Adnan Naji Jameel; Al-Masoudy, Murtadha M.; Ruggiero, Alessandro; Valigi, Maria Cristina
  Lubricants 11 (4): 173 (2023)
  Open Access | Verlags DOI
• Optimization of small horizontal axis wind turbines based on aerodynamic, steady-state, and dynamic analyses - Journal Article
  Deghoum, Khalil; Gherbi, Mohammed Taher; Sultan, Hakim S.; Al-Tamimi, Adnan Naji Jameel; Abed, Azher M.; Alqaisi, Oday Ibraheem Abdullah; Mechakra, Hamza; Boukhari, Ali
  Applied System Innovation 6 (2): 33 (2023)
  Open Access | Verlags DOI
• Effect of chamfer form and parameters on the characteristics of finite length journal bearing under impact load - Journal Article
  Jamali, Hazim U.; Sultan, Hakim S.; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel; Abbud, Luay Hashem; Ruggiero, Alessandro; Al-Dujaili, Zahraa A.
  Lubricants 11 (2): 73 (2023)
  Open Access | Verlags DOI
• The impact of accidents during the transport of dangerous good, on people, the environment, and infrastructure and measures for their reduction: a review - Journal Article
  Stojanovic, Nadica; Boskovic, Bojana; Petrovic, Miroslav; Grujic, Ivan; Abdullah, Oday Ibraheem
  Environmental Science and Pollution Research 30 (12): 32288-32300 (2023-03-01)
  Verlags DOI
• Analysis of the performance of chamfered finite-length journal bearings under dynamic loads - Journal Article
  Jamali, Hazim U.; Sultan, Hakim S.; Alqaisi, Oday Ibraheem Abdullah; Al-Tamimi, Adnan Naji Jameel; Albdeiri, Mahmood Shaker; Ruggiero, Alessandro; Al-Dujaili, Zahraa A.
  Mathematics 11 (3): 587 (2023)
  Open Access | Verlags DOI
• Predicting melt track geometry and part density in laser powder bed fusion of metals using machine learning - Journal Article
  Kuehne, Maxim; Bartsch, Katharina; Bossen, Bastian; Emmelmann, Claus
  Progress in Additive Manufacturing 8: 47-54 (2023-01-09)
  Open Access | Verlags DOI
• Design optimization of small wind turbine blade based on structural and fatigue life analyses - Journal Article
  Deghoum, Khalil; Gherbi, Mohammed Tahar; Jweeg, Muhsin J.; Sultan, Hakim S.; Abed, Azher M.; Abdullah, Oday Ibraheem; Djilani, Necib
  International Journal of Energy for a Clean Environment 24 (5): 53-66 (2023)
  Verlags DOI
• A study on the wind blade performance using blade element momentum theory - Conference Paper
  Abdullah, Oday I.; Ghanim, Marrwa S.; Jweeg, Muhsin Jaber; Sultan, Hakim S.; Abed, Azher M.
  AIP Conference Proceedings 2776 (1): 050005 (2023)
  Verlags DOI
• Development of a tree-support software module for PBF-LB/M - Conference Paper
  Hünting, Jan; Crego Lozares, Jose Manuel; Maiwald, Maria Isabelle; Michael, Jochen; Emmelmann, Claus; Röver, Tim
  Lasers in Manufacturing Conference 2023
  
• Digitalization of design for support structures in laser powder bed fusion of metals - Thesis
  Bartsch, Katharina
  Springer Nature Switzerland AG 978-3-031-22955-8: (2023)
  
• Investigation of the influence of sliding speed on thermoelastic problem in the frictional clutch system when applying a constant heat generation - Journal Article
  Al Saffar, Iman Q.; Aljibori, Hakim S. Sultan; Jweeg, Muhsin J.; Abed, Azher M.; Abdullah, Oday Ibraheem; Schlattmann, Josef; Sabri, Laith Abed; Alfilh, Raed H.C.
  Heat Transfer Research 54 (7): 19-40 (2023)
  Verlags DOI
• Methodische Werkstoff- und Prozessentwicklung für die additive Serienproduktion von automobilen Strukturkomponenten - Thesis
  Lutz, Andreas
  Springer 978-3-662-66532-9: (2023)
  
• Potenzialerschließung und -bewertung der sinterbasierten Kolbenextrusion - Thesis
  Waalkes, Lennart
  Springer Vieweg 978-3-662-66882-5: (2023)
  
• Powered education based on metaverse: pre- and post-COVID comprehensive review - Review Article
  Alfiras, Mohanad; Bojiah, Janaki; Mohammed, M. N.; Ibrahim, Firas Mohammed; Ahmed, Husham M.; Abdullah, Oday I.
  Open Engineering 13 (1): 20220476 (2023)
  Open Access | Verlags DOI

2022

• An investigation of the steady-state and fatigue problems of a small wind turbine blade based on the interactive design approach - Journal Article
  Deghoum, Khalil; Gherbi, Mohammed Tahar; Jweeg, Muhsin J.; Sultan, Hakim S.; Abed, Azher M.; Alqaisi, Oday Ibraheem Abdullah; Djilani, Necib
  International Journal of Renewable Energy Development 12 (1): 193-202 (2023-01-01)
  Open Access | Verlags DOI
• Microstructural and mechanical characterization of ledeburitic AISI D2 cold-work tool steel in semisolid zones via direct partial remelting process - Journal Article
  Mohammed, M. N.; Omar, M. Z.; Al-Tamimi, Adnan Naji Jameel; Sultan, Hakim S.; Abbud, Luay Hashem; Al-Zubaidi, Salah; Abdullah, Oday Ibraheem; Abdulrazaq, M.
  Journal of Manufacturing and Materials Processing 7 (1): 11 (2023)
  Open Access | Verlags DOI
• Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V - Journal Article
  Li, Gefei; Ganeriwala, Rishi; Herzog, Dirk; Bartsch, Katharina; King, Wayne
  Progress in Additive Manufacturing (in Press, cc by): (2023)
  Open Access | Verlags DOI
• A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  Journal of Engineering Research 10 (4): 128-141 (2022-12)
  Verlags DOI
• An investigation of the suspension characteristics of the line model of the vehicle using the taguchi method - Journal Article
  Stojanovic, Nadica; Jweeg, Muhsin J.; Grujic, Ivan; Petrovic, Miroslav; Muhsen, Sami; Abdullah, Oday Ibraheem
  International Journal of Applied Mechanics and Engineering 27 (4): 170-178 (2022-12)
  Open Access | Verlags DOI
• Particles formation due to the wear of tires and measures for the wear reduction: A review - Review Article
  Stojanovic, Nadica; Abdullah, Oday Ibraheem; Grujic, Ivan; Boskovic, Bojana
  Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 236 (14): (2022-12)
  Verlags DOI
• Intelligent robotic welding based on a computer vision technology approach - Journal Article
  Al-Karkhi, Nazar Kais; Abbood, Wisam T.; Khalid, Enas A.; Al-Tamimi, Adnan Naji Jameel; Kudhair, Ali A.; Abdullah, Oday Ibraheem
  Computers 11 (11): 155 (2022)
  Open Access | Verlags DOI
• An investigation of design and simulation of horizontal axis wind turbine using QBlade - Journal Article
  Altmimi, Amani I.; Aws, Aya; Jweeg, Muhsin Jaber; Abed, Azher M.; Abdullah, Oday I.
  Measurement Science Review 22 (6): 253-260 (2022-12-01)
  Open Access | Verlags DOI
• Design Guidelines For Green Parts Manufactured With Stainless Steel In The Filament Based Material Extrusion Process For Metals (MEX/M) - Conference Paper
  Asami, Mohammad Karim; Herzog, Dirk; Bossen, Bastian; Geyer, Leon; Klemp, Clarissa; Emmelmann, Claus
  World PM Congress (2022)
  
• Methodology for Integrating Biomimetic Beams in Abstracted Topology Optimization Results - Conference Paper
  Röver, Tim; Lau, Robert Johannes; Lange, Fritz; Struve, Arnd; Fuchs, Cedrik; Bartsch, Katharina; Seibel, Arthur; Emmelmann, Claus
  International Mechanical Engineering Congress and Exposition (ASME 2022)
  Verlags DOI
• The influence of the brake pad construction on noise formation, people’s health and reduction measures - Journal Article
  Stojanovic, Nadica; Belhocine, Ali; Abdullah, Oday Ibraheem; Grujic, Ivan
  Environmental Science and Pollution Research 30 (6): 15352-15363 (2023)
  Verlags DOI
• Minimizing misalignment effects in finite length journal bearings - Journal Article
  Jamali, Hazim U.; Sultan, Hakim S.; Senatore, Adolfo; Al-Dujaili, Zahraa A.; Jweeg, Muhsin Jaber; Abed, Azher M.; Abdullah, Oday Ibraheem
  Designs 6 (5): 85 (2022)
  Open Access | Verlags DOI
• Development of hybrid intelligent models for prediction machining performance measure in end milling of Ti6Al4V alloy with PVD coated tool under dry cutting conditions - Journal Article
  Al-Zubaidi, Salah; Ghani, Jaharah Abdul; Haron, Che Hassan Che; Mohammed, M. N.; Al-Tamimi, Adnan Naji Jameel; Sarhan, Samaher M.; Salleh, Mohd Shukor; Abdulrazaq, M.; Abdullah, Oday Ibraheem
  Lubricants 10 (10): 236 (2022)
  Open Access | Verlags DOI
• Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining - Journal Article
  Romanenko, Denys; Jothi Prakash, Vishnuu; Kuhn, Tobias; Möller, Carsten; Hintze, Wolfgang; Emmelmann, Claus
  Procedia CIRP 111: 271-276 (2022)
  Open Access | Verlags DOI
• Signal processing of airborne acoustic emissions from laser metal deposited structures - Journal Article
  Weber, Julian Ulrich; Knabe, Michael; Sayilgan, Vurgun; Emmelmann, Claus
  Procedia CIRP 111: 359-362 (2022)
  Open Access | Verlags DOI
• The influence of spoiler on the aerodynamic performances and longitudinal stability of the passenger car under high speed condition - Journal Article
  Stojanovic, Nadica; Abdullah, Oday Ibraheem; Grujic, Ivan; Glisovic, Jasna; Belhocine, Ali
  Journal of Visualization 26 (1): 97-112 (2023)
  Verlags DOI
• Thermal conductivity of Ti-6Al-4V in laser powder bed fusion - Journal Article
  Bartsch, Katharina; Bossen, Bastian; Chaudhary, Waqar; Landry, Michael; Herzog, Dirk
  Frontiers in Mechanical Engineering 8: 830104 (2022-07-01)
  Open Access | Verlags DOI
• Recycling-oriented fabrication of soft robots - Conference Paper
  Nguyen, Anh Minh; Seibel, Arthur
  IEEE 5th International Conference on Soft Robotics (RoboSoft 2022)
  Verlags DOI
• Strain hardening behavior of additively manufactured and annealed AlSi3.5Mg2.5 alloy - Journal Article
  Zhang, X. X.; Lutz, Andreas; Andrä, Heiko; Lahres, Michael; Gong, W.; Harjo, S.; Emmelmann, Claus
  Journal of Alloys and Compounds 898: 162890 (2022-03-25)
  Open Access | Verlags DOI
• Effect of frictional material on thermal behavior of brake system - Journal Article
  Mohammed, Aliyaa Q.; Hussain, Ihsan Y.; Abdullah, Oday Ibraheem
  Tribology in Industry 44 (1): 64-72 (2022-03)
  Open Access | Verlags DOI
• Enabling cost-based support structure optimization in laser powder bed fusion of metals - Journal Article
  Bartsch, Katharina; Emmelmann, Claus
  JOM 74 (3): 1126-1135 (2022-03)
  Open Access | Verlags DOI
• Experimental investigation of transient thermal characteristics of a dry friction clutch using alternative friction materials under different operating conditions - Journal Article
  Sherzaa, Jenan S.; Hussain, Ihsan Y.; Abdullah, Oday Ibraheem
  Heat Transfer 51 (5): 3920-3950 (2022-02-23)
  Open Access | Verlags DOI
• Dynamic performance of a series elastic actuator with variable stiffness logarithmic spiral spring - Journal Article
  Abbood, Wisam T.; Nacy, Somer M.; Youssef, George; Abdullah, Oday Ibraheem
  Intelligent Service Robotics 15 (3): 275-287 (2022)
  Verlags DOI
• Design guidelines for laser powder bed fusion in Inconel 718 - Journal Article
  Herzog, Dirk; Asami, Mohammad Karim; Scholl, Christoph; Ohle, Christoph; Emmelmann, Claus; Sharma, Ashish N.; Markovic, Nick; Harris, Andy
  Journal of Laser Applications 34 (1): 012015 (2022-02-01)
  Open Access | Verlags DOI
• Estimating Weibull parameters using Mabchour’s method (MMab) for wind power at RAWA City, Iraq - Journal Article
  Altmimi, Amani I.; Al-Swaiedi, Safaa J.; Abdullah, Oday Ibraheem
  Applied System Innovation 5 (1): 14 (2022)
  Open Access | Verlags DOI
• Particle formation due to brake wear, influence on the people health and measures for their reduction: a review - Journal Article
  Stojanovic, Nadica; Glisovic, Jasna; Abdullah, Oday Ibraheem; Belhocine, Ali; Grujic, Ivan
  Environmental Science and Pollution Research 29 (7): 9606-9625 (2022-02-01)
  Verlags DOI
• Piston-based material extrusion of Ti-6Al-4V feedstock for complementary use in metal injection molding - Journal Article
  Waalkes, Lennart; Längerich, Jan; Imgrund, Philipp; Emmelmann, Claus
  Materials 15 (1): 351 (2022)
  Open Access | Verlags DOI
• Performance of different photovoltaic technologies for amorphous silicon (A-SI) and copper indium gallium diselenide (CIGS) photovoltaic modules - Journal Article
  Kadia, Noor Jamel; Hashim, Emad T.; Abdullah, Oday Ibraheem
  Journal of Engineering and Sustainable Development 26 (1): 95 - 105 (2022)
  Open Access | Verlags DOI
• Potentials of Metal Binder Jetting Process Chains for Medical Parts - Conference Paper
  Janzen, Kevin; Groß, Patricia; Imgrund, Philipp; Emmelmann, Claus
  World PM Congress (2022)
  
• The Influence of the Braking Disc Ribs and Applied Material on the Natural Frequency - Journal Article
  Abdullah, Oday Ibraheem; Stojanovic, Nadica; Grujic, Ivan
  International Journal of Precision Engineering and Manufacturing 23 (1): 87-97 (2022-01)
  Verlags DOI
• Additive manufacturing of mechatronic integrated devices - Thesis
  Proes, Friedrich
  Springer 978-3-031-16220-6: (2022)
  
• Design, modelling and control of hybrid kinematic soft robots - Thesis
  Schiller, Lars Erik
  Robotertechnik 4: (2022)
  
• Ein Beitrag zur mechanischen Auslegung von Sitzabdichtungen federbelasteter Sicherheitsventile - Thesis
  Schimanowski, Alex
  Konstruktionsmethodik und Produktentwicklung 15: (2022)
  
• Finite element analysis of class II mandibular unilateral distal extension partial dentures - Journal Article
  Sabri, Laith Abed; Abdulkareem, Jwan F.; Salloomi, Kareem N.; Faraj, Suza A.; Al-Zahawi, Abdulsalam R.; Abdullah, Oday Ibraheem; Tulunoglu, Ibrahim
  Proceedings of the Institution of Mechanical Engineers, Part C 236 (17): 9407-9418 (2022)
  Open Access | Verlags DOI
• Numerical predictions of laminar flow and free convection heat transfer from an isothermal vertical flat plate - Journal Article
  Belhocine, Ali; Stojanovic, Nadica; Abdullah, Oday Ibraheem
  Archive of Mechanical Engineering 69 (4): 749-773 (2022)
  Verlags DOI
• Optimization and design for additive manufacturing of a fuel cell end plate - Journal Article
  Herzog, Dirk; Röver, Tim; Abdolov, Sagynysh; Becker, Florian; Gentner, Christoph
  Journal of Laser Applications 34 (4): 042027 (2022-11-01)
  Open Access | Verlags DOI
• Systematische Konzeption einer automatisierten Generierung von Verbaureihenfolgen in der Automobilindustrie - Thesis
  Kleinmichel, Fabienne Denise
  sierke Verlag 978-3-96548-140-4: (2022)
  
• The determination of the disc brake thermal stresses for different vehicle speeds - Journal Article
  Stojanovic, Nadica; Grujic, Ivan; Abdullah, Oday Ibraheem; Belhocine, Ali; Glisovic, Jasna
  IOP Conference Series: Materials Science and Engineering 1271 (): 012024 (2022)
  Open Access | Verlags DOI

2021

• Three-dimensional finite element analysis of contact problem in dry friction clutches - Journal Article
  Sabri, Laith A.; Stojanovic, Nadica; Senatore, Adolfo; Jweeg, Muhsin Jaber; Abed, Azher M.; Abdullah, Oday Ibraheem
  Lubricants 9 (12): 115 (2021-12)
  Open Access | Verlags DOI
• Analytical and numerical solutions for the thermal problem in a friction clutch system - Journal Article
  Sabri, Laith Abed; Topczewska, Katarzyna; Jweeg, Muhsin Jaber; Abdullah, Oday Ibraheem; Abed, Azher M.
  Computation 9 (11): 122 (2021)
  Open Access | Verlags DOI
• Comparative on-grid solar systems winter performance analyses of different PV technologies in Baghdad weather - Conference Paper
  Obaid, Nibras M.; Kasim, Naseer K.; Kadhim, Arwa M.; Alhamadani, Ahmed; Abdullah, Oday Ibraheem
  International Conference on Engineering and Science (ICES 2021)
  Verlags DOI
• Stereo camera based in-situ monitoring of L-PBF process stability by spatter detection - Conference Paper
  Brummerloh, Daniel Lukas; Jutkuhn, Dennis; Yang, Zheng; Penn, Alexander; Emmelmann, Claus
  Advancing Precision in Additive Manufacturing (2021)
  
• Thermal and thermoelastic problems in dry friction clutch: a comprehensive review - Journal Article
  Jabbar, Nasr A.; Hussain, Ihsan Y.; Abdullah, Oday Ibraheem
  Heat Transfer 50 (8): 7855-7878 (2021-12-01)
  Open Access | Verlags DOI
• Fluid-structure interaction modelling of a soft pneumatic actuator - Journal Article
  Maruthavanan, Duraikannan; Seibel, Arthur; Schlattmann, Josef
  Actuators 10 (7): 163 (2021)
  Open Access | Verlags DOI
• On the digital twin application and the role of artificial intelligence in additive manufacturing: a systematic review - Journal Article
  Bartsch, Katharina; Pettke, Alexander; Hübert, Artur; Lakämper, Julia; Lange, Fritz
  JPhys Materials 4 (3): 032005 (2021-07-01)
  Open Access | Verlags DOI
• Compression behavior of typical silicone rubbers for soft robotics applications at elevated temperatures - Conference Paper
  Utkan, Doruk; Maruthavanan, Duraikannan; Schimanowski, Alex; Seibel, Arthur
  IEEE 4th International Conference on Soft Robotics (RoboSoft 2021)
  Verlags DOI
• Remote control of a soft walking robot - Conference Paper
  Schiller, Lars; Seibel, Arthur
  IEEE 4th International Conference on Soft Robotics (RoboSoft 2021)
  Verlags DOI
• Toward industrial silicone 3D printing of soft robots - Conference Paper
  Weigand, Felix; Nguyen, Anh Minh; Wolff, Jan; Seibel, Arthur
  IEEE 4th International Conference on Soft Robotics (RoboSoft 2021)
  Verlags DOI
• Comparison of iPad Pro’s LiDAR and TrueDepth capabilities with an industrial 3D scanning solution - Journal Article
  Vogt, Maximilian; Rips, Adrian; Emmelmann, Claus
  Technologies 9 (2): 25 (2021)
  Open Access | Verlags DOI
• Material modeling of Ti–6Al–4V alloy processed by laser powder bed fusion for application in macro-scale process simulation - Journal Article
  Bartsch, Katharina; Herzog, Dirk; Bossen, Bastian; Emmelmann, Claus
  Materials Science and Engineering A 814: 141237 (2021-05-13)
  Open Access | Verlags DOI
• Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy - Journal Article
  Zhang, X. X.; Lutz, Andreas; Andrä, Heiko; Lahres, Michael; Gan, Weimin; Maawad, Emad; Emmelmann, Claus
  International Journal of Plasticity 139: 102946 (2021-04)
  Verlags DOI
• Effect of heat accumulation on the single track formation during laser metal deposition and development of a framework for analyzing new process strategies - Journal Article
  Heilemann, Markus; Jothi Prakash, Vishnuu; Beulting, Lorenz; Emmelmann, Claus
  Journal of Laser Applications 33 (1): 0000307 (2021-02-01)
  Verlags DOI
• Digitalization of directed energy deposition process through a multidirectional height monitoring sensor system - Journal Article
  Jothi Prakash, Vishnuu; Buhr, Malte; Emmelmann, Claus
  Journal of Laser Applications 1 (33): 012044 (2021-01-22)
  Open Access | Verlags DOI
• Advancement of selective laser melting by laser beam shaping - Thesis
  Wischeropp, Tim Marten
  Springer: 978-3-662-64584-0 (2021)
  
• Generatives Design zur Optimierung additiv gefertigter Kühlkörper - Thesis
  Struve, Arnd
  Springer 978-3-662-63070-9: (2021)
  Verlags DOI
• Numerical Simulation of Laminar Boundary Layer Flow Over a Horizontal Flat Plate in External Incompressible Viscous Fluid - Journal Article
  Belhocine, Ali; Stojanovic, Nadica; Abdullah, Oday Ibraheem
  European Journal of Computational Mechanics 30 (4-6) : 337-386 (2021)
  Verlags DOI
• Prozessgerechte Topologieoptimierung für die Additive Fertigung - Thesis
  Lange, Fritz
  Springer 978-3-662-63132-4: (2021)
  
• Systematic design of soft machines - Thesis
  Seibel, Arthur
  Sierke Verlag 978-3-96548-112-1: (2021)
  
• The Influence Of The Hydrogen Injection Timing On The Internal Combustion Engine Working Cycle - Journal Article
  Grujić, Ivan Lj; Dorić, Jovan; Abdullah, Oday Ibraheem; Stojanović, Nadica R.; Davinić, Aleksandar Lj
  Thermal Science 25 (5 Part B): 3801-3811 (2021)
  Verlags DOI

2020

• Praxisbericht: Fachwissenschaft und Berufspraxis verbunden durch kollaboratives Peer Teaching im Studium des Lehramts an Beruflichen Schulen - Journal Article
  Bartsch, Katharina; Ewald, Ake; Herzog, Dirk
  Journal of Technical Education (JOTED), 8(2), 81–97
  Open Access | Verlags DOI
• Investigation of thermal influence on the frictional characteristics of friction materials - Journal Article
  Al-Zubaidi, Salah; Abdullah, Oday Ibraheem
  Journal of the Balkan Tribological Association 26 (3): 448-463 (2020-11)
  
• Effect of sliding speed on the thermal stresses of single-disk friction clutches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Senatore, Adolfo; Sabri, Laith Abed; Al-Sahb, Wassan Abd
  Journal of Failure Analysis and Prevention 5 (20): 1534-1540 (2020)
  Verlags DOI
• Feasibility study on piston-based feedstock fabrication with Ti-6Al-4V metal injection molding feedstock - Journal Article
  Waalkes, Lennart; Längerich, Jan; Holbe, Felix; Emmelmann, Claus
  Additive Manufacturing (35): 101207 (2020-10)
  Verlags DOI
• Countercurrently Operated Reactive Extractor with an Additively Manufactured Enzyme Carrier Structure - Journal Article
  Büscher, Niclas; Spille, Claas; Kracht, John-Kevin; Sayoga, Giovanni; Dawood, Ayad W. H.; Maiwald, Maria Isabelle; Herzog, Dirk; Schlüter, Michael; Liese, Andreas
  Organic Process Research and Development 9 (24): 1621-1628 (2020-09-18)
  Verlags DOI
• Focus shift control of a novel 30 kW laser remote scanner for large-scale industrial sheet and plate metal applications - Conference Paper
  Cerwenka, Georg; Paternina, Jully; Elhefnawy, Mohamed; Wollnack, Jörg; Emmelmann, Claus
  Procedia CIRP (94): 817-822 (2020)
  Open Access | Verlags DOI
• Numerical analysis of thermal problem in dry friction clutches based on the interactive design approach - Journal Article
  Majeed, Mahir H.; Kadhim, Dheyaa Eesa; Abdullah, Oday Ibraheem; Schlattmann, Josef
  International Journal on Interactive Design and Manufacturing 3 (14): 1091-1101 (2020-09-01)
  Verlags DOI
• Benchmark parts for the evaluation of optimized support structures in Laser Powder Bed Fusion of metals - Journal Article
  Bartsch, Katharina; Ohrenberg, Joost; Emmelmann, Claus
  11th CIRP Conference on Photonic Technologies (LANE 2020)
  Open Access | Verlags DOI
• Modeling and simulation of frictional disc/pad interface considering the effects of thermo-mechanical coupling - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  World Journal of Engineering 6 (17): 761-784 (2020-08-11)
  Verlags DOI
• Effect of sliding speed on the thermal fields and frictional behaviours of asbestos-free frictional materials used for dry clutch system - Conference Paper
  Al-Zubaidi, Salah; Senatore, Adolfo; Abdullah, Oday Ibraheem; Scuotto, Nicola
  IOP Conference Series: Materials Science and Engineering 1 (881): 012086 (2020-08-10)
  Open Access | Verlags DOI
• Productivity optimization of laser powder bed fusion by hot isostatic pressing - Journal Article
  Herzog, Dirk; Bartsch, Katharina; Bossen, Bastian
  Additive Manufacturing (36): 101494 (2020)
  Open Access | Verlags DOI
• SMART-Reactors : tailoring gas holdup distribution by additively manufactured lattice structures - Journal Article
  Spille, Claas; Lyberis, Anastasios; Maiwald, Maria Isabelle; Herzog, Dirk; Hoffmann, Marko; Emmelmann, Claus; Schlüter, Michael
  Chemical Engineering and Technology 10 (43): 2053-2061 (2020)
  Open Access | Verlags DOI
• A gait pattern generator for closed-loop position control of a soft walking robot - Journal Article
  Schiller, Lars; Seibel, Arthur; Schlattmann, Josef
  Frontiers in Robotics and AI (7): 87 (2020-07-02)
  Open Access | Verlags DOI
• Investigation of the penetration and temperature of the friction pair under different working conditions - Journal Article
  Stojanovic, Nadica; Abdullah, Oday Ibraheem; Schlattmann, Josef; Grujic, Ivan; Glisovic, Jasna
  Tribology in Industry 2 (42): 288-298 (2020)
  Open Access | Verlags DOI
• Manufacturing, control, and performance evaluation of a gecko-inspired soft robot - Journal Article
  Schiller, Lars; Seibel, Arthur; Schlattmann, Josef
  Journal of Visualized Experiments 160 (2020): e61422 (2020-06-01)
  Open Access | Verlags DOI
• Effect of Rear Spoiler Shape on Car Aerodynamics and Stability - Conference Paper
  Stojanovic, Nadica; Miloradović, Danijela; Abdullah, Oday Ibraheem; Grujic, Ivan; Vasiljevic, Sasa
  Lecture Notes in Networks and Systems (128 LNNS): 340-347 (2020-06)
  Verlags DOI
• Influence of laser beam profile on the selective laser melting process of AlSi10Mg - Journal Article
  Wischeropp, Tim Marten; Tarhini, Hussein; Emmelmann, Claus
  Journal of Laser Applications 32 (2): 022059 (2020-05-01)
  Verlags DOI
• Structure and frictional properties of the leg joint of the beetle Pachnoda marginata (Scarabaeidae, Cetoniinae) as an inspiration for technical joints - Journal Article
  Vagts, Steffen; Schlattmann, Josef; Kovalev, Alexander; Gorb, Stanislav N.
  Biomimetics 5 (2): 14 (2020)
  Open Access | Verlags DOI
• Analytical solution and numerical simulation of the thermal entrance region problem for laminar flow through a circular pipe - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  International Journal of Modeling, Simulation, and Scientific Computing 2 (11): 2050013 (2020-04-01)
  Verlags DOI
• Automated fabrication of elastomeric prepregs for soft robotics applications - Journal Article
  Wienzek, Tristan; Seibel, Arthur
  Advanced Engineering Materials 22 (4): 1900854 (2020-04-1)
  Open Access | Verlags DOI
• Thermal stress analysis of dry friction clutches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Jobair, Hussein K.; Beliardouh, Nasser Eddine; Kaleli, Hakan
  Industrial Lubrication and Tribology 72 (2): 189-194 (2020-04-01)
  Verlags DOI
• A Gecko-Inspired Soft Passive Gripper - Journal Article
  Seibel, Arthur; Yıldız, Mert; Zorlubaş, Brekan
  Biomimetics 5 (2): Artikel Nr. 5020012 (2020)
  Open Access | Verlags DOI
• Biomimetic design and laser additive manufacturing - A perfect symbiosis? - Journal Article
  Gralow, Melanie; Weigand, Felix; Herzog, Dirk; Wischeropp, Tim Marten; Emmelmann, Claus
  Journal of Laser Applications 2 (32): 021201 (2020)
  Open Access | Verlags DOI
• A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  Journal of Thermal Stresses 3 (43): 305-320 (2020-03-03)
  Verlags DOI
• A real-time automated sorting of robotic vision system based on the interactive design approach - Journal Article
  Abbood, Wisam T.; Abdullah, Oday Ibraheem; Khalid, Enas A.
  International Journal on Interactive Design and Manufacturing 1 (14): 201-209 (2020-03-01)
  Verlags DOI
• Design and Thermomechanical Finite Element Analysis of Frictional Contact Mechanism on Automotive Disc Brake Assembly - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  Journal of Failure Analysis and Prevention 1 (20): 270-301 (2020-02-01)
  Verlags DOI
• A lightweight simulation model for soft robot's locomotion and its application to trajectory optimization - Journal Article
  Schiller, Lars; Seibel, Arthur; Schlattmann, Josef
  IEEE Robotics and Automation Letters 2 (5): 8957491, 1199-1206 (2020-04-01)
  Verlags DOI
• Qualification of SLM : additive manufacturing for aluminium - Thesis
  Schmidtke, Katja
  Technische Universität Hamburg (2020)
  Open Access
• Efficient material laser beam ablation with a picosecond laser - Thesis
  Calderón Urbina, Juan Pablo
  Springer Vieweg 978-3-662-61885-1: (2020)
  
• Finite element analysis (FEA) of frictional contact phenomenon on vehicle braking system - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  Mechanics Based Design of Structures and Machines: 1-36 (2020)
  Verlags DOI
• Hybrid Manufacturing for Design - Halbzeugoptimierte, additiv-subtraktive Herstellung von Leichtbau-Strukturbauteilen - Thesis
  Ewald, Ake
  Sierke Verlag 978-3-96548-068-1: (2020)
  
• Investigation of thermal behavior of brake system using alternative materials - Journal Article
  Stojanovic, Nadica; Abdullah, Oday Ibraheem; Glisovic, Jasna; Grujic, Ivan; Dorić, Jovan
  Heat Transfer Research 51 (17): 1609-1623 (2020)
  Verlags DOI
• Kit based motion generator for a soft walking robot - Conference Paper
  Schiller, Lars; Maruthavanan, Duraikannan; Seibel, Arthur; Schlattmann, Josef
  ASME International Mechanical Engineering Congress and Exposition (IMECE 2020)
  Verlags DOI
• Laserbasierte Klebflächenvorbereitung für CFK Strukturbauteile - Thesis
  Thumann, Philipp
  Springer Berlin 978-3-662-62240-7: (2020)
  
• Pressure influence on heating of ventilating disc brakes for passenger cars - Journal Article
  Stojanovć, Nadica R.; Glišovć, Jasna D.; Abdullah, Oday Ibraheem; Grujic, Ivan; Ž. Vasiljević, Saša
  Thermal Science 24 (1): 203-214 (2020)
  Verlags DOI
• Prozessmanagement für das Laser-Pulver-Auftragschweißen - Thesis
  Möller, Mauritz Leander Birger
  Springer Vieweg 978-3-662-62224-7: (2020)
  
• Prozessüberwachung beim Laser-Remote-Trennen - Thesis
  Oberlander, Max
  Springer Vieweg 978-3-662-61512-6: (2020)
  
• Temperature and thermal stresses distributions in a dry friction clutch - Journal Article
  Topczewska, Katarzyna; Schlattmann, Josef; Abdullah, Oday Ibraheem
  Journal of Theoretical and Applied Mechanics 2 (58): 351-360 (2020)
  Open Access | Verlags DOI
• The Performance of One-Way Clutch in a Cam-Based Infinitely Variable Transmission - Conference Paper
  Al-Hamood, Amjad; Jamali, Hazim U.; Abdullah, Oday Ibraheem; Schlattmann, Josef
  International Conference on Engineering Sciences (ICES 2019)
  Open Access | Verlags DOI
• The influence of surrounding temperatures on dynamic characteristics of circular cylindrical shell - Journal Article
  Majeed, Mahir H.; Kadhim, Dheyaa Eesa; Abdullah, Oday Ibraheem
  Journal of Mechanical Engineering Research and Developments 4 (43): 275-286 (2020)
  

2019

• Toward a gecko-inspired, climbing soft robot - Journal Article
  Schiller, Lars; Seibel, Arthur; Schlattmann, Josef
  Frontiers in Neurorobotics (13): 106 (2019)
  Open Access | Verlags DOI
• Modeling and theoretical analysis of a novel ratcheting-type cam-based infinitely variable transmission system - Journal Article
  Al-Hamood, Amjad; Jamalia, Hazim; Imran, Amer; Abdullah, Oday Ibraheem; Senatore, Adolfo; Kaleli, Hakan
  Comptes Rendus - Mecanique 12 (347): 891-902 (2019-12)
  Verlags DOI
• On using inertial measurement units for solving the direct kinematics problem of parallel mechanisms - Journal Article
  Schulz, Stefan
  Robotics 8 (4): 99 (2019)
  Open Access | Verlags DOI
• On the origin of passive rotation in rotational joints, and how to calculate it - Conference Paper
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  Annual Meeting of the International Association of Applied Mathematics and Mechanic (GAMM 2019) 19 (1): e201900298 (2019)
  Open Access | Verlags DOI
• Industrial tracking camera and product vision detection system - Journal Article
  Abbood, Wisam T.; Hussein, Hiba K.; Abdullah, Oday Ibraheem
  Journal of Mechanical Engineering Research and Developments 4 (42): 277-280 (2019)
  Open Access | Verlags DOI
• Dynamics and lubrication analyses of scotch yoke mechanism - Journal Article
  Al-Hamood, Amjad; Jamali, Hazim U.; Abdullah, Oday Ibraheem; Senatore, Adolfo
  International Journal on Interactive Design and Manufacturing 3 (13): 901-907 (2019-09-01)
  Verlags DOI
• Numerical analysis of cam and follower based on the interactive design approach - Journal Article
  Al-Hamood, Amjad; Jamali, Hazim U.; Abdullah, Oday Ibraheem; Senatore, Adolfo; Kaleli, Hakan
  International Journal on Interactive Design and Manufacturing 3 (13): 841-849 (2019-09-01)
  Verlags DOI
• Performance evaluation of a sensor concept for solving the direct kinematics problem of general planar 3-RPR parallel mechanisms by using solely the linear actuators’ orientations - Journal Article
  Schulz, Stefan
  Robotics 8 (3): 72 (2019)
  Open Access | Verlags DOI
• Recycling-oriented design in soft robotics - Journal Article
  Nguyen, Anh Minh; Seibel, Arthur
  Actuators 8 (3): 62 (2019)
  Open Access | Verlags DOI
• Estimation of impact energy for seat seals in spring-operated pressure relief valves during the reseating process under compressible fluid service conditions - Conference Paper
  Schimanowski, Alex; Schlattmann, Josef
  PVP / Pressure Vessels and Piping Division, American Society of Mechanical Engineers 3: (2019)
  Verlags DOI
• Stress and vibration analyses of the wind turbine blade (A NREL 5MW) - Journal Article
  Zuheir, Sura; Abdullah, Oday Ibraheem; Al-Maliki, Mustafa
  Journal of Mechanical Engineering Research and Developments 4 (42): 14-19 (2019)
  Open Access | Verlags DOI
• Analysis of wind turbine using QBlade software - Conference Paper
  Alaskari, Mustafa; Abdullah, Oday Ibraheem; Majeed, Mahir H.
  IOP Conference Series: Materials Science and Engineering 3 (518): 032020 (2019-06-05)
  Open Access | Verlags DOI
• Numerical simulation of thermally developing turbulent flow through a cylindrical tube - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  International Journal on Interactive Design and Manufacturing 13 (2): 633-644 (2019-06-01)
  Verlags DOI
• A novel approach to avoid internal support structures in fluid flow optimization for additive manufacturing - Conference Paper
  Lange, Fritz; Shinde, Anshuman S.; Bartsch, Katharina; Emmelmann, Claus
  NAFEMS World Congress, 17.-20.06.2019, Quebec City, Canada (2019)
  
• The distribution of frictional heat generated between the contacting surfaces of the friction clutch system - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Majeed, Mahir H.; Sabri, Laith Abed
  International Journal on Interactive Design and Manufacturing 2 (13): 487-498 (2019-06)
  Verlags DOI
• 3D/6D calibration and real-time focus shift compensation for automated 30 kW laser remote scanner - Journal Article
  Cerwenka, Georg; Wollnack, Jörg; Krähling, Thomas; Jayaprakash, Rekha; Emmelmann, Claus
  Journal of Laser Applications 2 (31): 022607 (2019-05-01)
  Verlags DOI
• Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization - Journal Article
  Bartsch, Katharina; Lange, Fritz; Gralow, Melanie; Emmelmann, Claus
  Journal of Laser Applications 2 (31): 022302- (2019-05-01)
  Verlags DOI
• Elastomeric Prepregs for Soft Robotics Applications - Journal Article
  Wienzek, Tristan; Seibel, Arthur
  Advanced Engineering Materials 5 (21): 1801200 (2019-05)
  Verlags DOI
• Selbstorganisiertes Lernen als Vorbereitung für das lebenslange Lernen im Lehrberuf - Conference Paper
  Daniel, Christian; Bartsch, Katharina; Emmelmann, Claus
  Ingenieurpädagogische Regionaltagung, 23.-25.05.2019, Bremen (2019)
  
• Lubrication analyses of cam and flat-faced follower - Journal Article
  Jamali, Hazim U.; Al-Hamood, Amjad; Abdullah, Oday Ibraheem; Senatore, Adolfo; Schlattmann, Josef
  Lubricants 7 (4): 31 (2019)
  Open Access | Verlags DOI
• Laser Beam Melting of Large-Scale Ti-6Al-4V Parts - Increasing Productivity and Reducing Residual Stresses - Conference Presentation
  Herzog, Dirk; Bartsch, Katharina; Bossen, Bastian; Schenk, Kerstin; Emmelmann, Claus
  MRS Spring Meeting, Phoenix, USA (2019)
  
• Thermal stress analysis of the multi-disc friction clutches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Hussain, Ihsan; Al-Sahb, Wassan Abd
  Jurnal Tribologi (20): 114-124 (2019-03)
  
• Three-dimensional simulation of the thermal problem in friction clutches using finite element technique - Journal Article
  Sabri, Laith Abed; Schlattmann, Josef; Abdullah, Oday Ibraheem; Beliardouh, Nasser Eddine; Assenova, Emilia
  Proceedings on Engineering Sciences 1 (1): 309-315 (2019)
  Verlags DOI
• A sensor concept for solving the direct kinematics problem of parallel mechanisms - Thesis
  Schulz, Stefan
  sierke VERLAG, Robotertechnik (3): 2019
  
• A simple control strategy for increasing the soft bending actuator performance by using a pressure boost - Conference Paper
  Pinto, Brian Alphonse; Schiller, Lars; Seibel, Arthur
  ASME International Mechanical Engineering Congress and Exposition, IMECE (4): (2019)
  Verlags DOI
• Application of New Technologies to Improve the Visual Field of Heavy Duty Vehicles Drivers - Book Part
  Stojanovic, Nadica; Grujic, Ivan; Glisovic, Jasna; Abdullah, Oday Ibraheem; Vasiljevic, Sasa
  New Technologies, Development and Application II (NT 2019)
  Verlags DOI
• Assembly Modes of General Planar 3-RPR Parallel Mechanisms when Using the Linear Actuators’ Orientations - Book Part
  Schulz, Stefan; Seibel, Arthur; Schlattmann, Josef
  Mechanisms and Machine Science (73): 279-288 (2019)
  Verlags DOI
• Laserstrahlabtragen von kubischem Bornitrid zur Endbearbeitung von Zerspanwerkzeugen - Thesis
  Daniel, Christian
  Shaker Verlag (2019)
  
• On friction-induced vibrations during tightening of bolted joints - Thesis
  Baramsky, Nicolaj
  sierke VERLAG, Göttingen (2020)
  
• On-board pneumatic pressure generation methods for soft robotics applications - Journal Article
  Adami, Momme; Seibel, Arthur
  Actuators 8 (1): 2 (2019)
  Open Access | Verlags DOI
• Passive Rotation of Rotational Joints and Its Computation Method - Book Part
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  In: Uhl T. (eds) Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73. Springer, Cham
  Verlags DOI
• Study the structural problem in the brake system applying a different pressure functions - Journal Article
  Stojanovic, Nadica; Abdullah, Oday Ibraheem; Schlattmann, Josef; Grujic, Ivan; Glisovic, Jasna
  Proceedings on Engineering Sciences 1 (1): 298-308 (2019)
  Verlags DOI
• Systemische Methodenunterstützung in der Bionik - Thesis
  Vagts, Steffen
  sierke VERLAG, Konstruktionsmethodik und Produktentwicklung (10): 2019
  

2018

• Performance of an IMU-Based Sensor Concept for Solving the Direct Kinematics Problem of the Stewart-Gough Platform - Conference Paper
  Schulz, Stefan; Seibel, Arthur; Schlattmann, Josef
  IEEE International Conference on Intelligent Robots and Systems: 5055-5062 (2018-12-27)
  Verlags DOI
• Friction-induced vibrations during tightening of bolted joints : analytical and experimental results - Journal Article
  Baramsky, Nicolaj; Seibel, Arthur; Schlattmann, Josef
  Vibration 1 (2): 312-337 (2018)
  Open Access | Verlags DOI
• Investigation of thermoelastic problem of multiple-disc friction clutches applying different thermal loads - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Senatore, Adolfo; Al-Shabibi, Abdullah M.
  Heat and Mass Transfer 11 (54): 3461-3471 (2018-11-01)
  Verlags DOI
• Organization of post-processing processes in additive manufacturing structures - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 11 (113): 738-741 (2018-11)
  Verlags DOI
• Comparison of three methods of length compensation in a parallel kinematic and their equivalence conditions - Journal Article
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE 2018)
  Open Access | Verlags DOI
• Closed-form Solution for the Direct Kinematics Problem of the Planar 3-RPR Parallel Mechanism - Conference Paper
  Schulz, Stefan; Seibel, Arthur; Schlattmann, Josef
  Proceedings - IEEE International Conference on Robotics and Automation: 968-973 (2018-09-10)
  Verlags DOI
• Entwicklung eines Laufmusters und Entwurf einer weichen Laufmaschine nach biologischem Vorbild - Conference Paper
  Schiller, Lars; Seibel, Arthur
  VDI Berichte 2018 (2331): 191-199 (2018)
  
• Laser metal deposition of titanium parts with increased productivity - Book Part
  Jothi Prakash, Vishnuu; Möller, Mauritz; Weber, Julian; Emmelmann, Claus
  3D Printing and Additive Manufacturing Technologies : 297-311 (2018-08-02)
  Verlags DOI
• Design guidelines for laser metal deposition of lightweight structures - Journal Article
  Ewald, Ake; Schlattmann, Josef
  Journal of Laser Applications 3 (30): 032309- (2018-08-01)
  Verlags DOI
• In-depth characterization of the scanner-based selective laser deburring process - Journal Article
  Cerwenka, Georg; Surrey, Philipp; Möller, Mauritz; Conrad, Christian; Jothi Prakash, Vishnuu; Heilemann, Markus; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032510- (2018-08-01)
  Verlags DOI
• Optimization of laser-remote-cutting of CFRP by means of variable exposure delay times - Simulation and validation - Journal Article
  Oberlander, Max; Canisius, Marten; Hergoss, Philipp; Bartsch, Katharina; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032204- (2018-08-01)
  Verlags DOI
• Quality target-based control of geometrical accuracy and residual stresses in laser metal deposition - Journal Article
  Möller, Mauritz; Emmelmann, Claus
  Journal of Laser Applications 3 (30): 032303- (2018-08-01)
  Verlags DOI
• Characterising the friction and wear behaviour of lubricated metal-metal pairings with an optical online particle detection system - Journal Article
  Krasmik, Viktor; Röbken, Nils; Martin, Christoph; Martin, Peter; Schlattmann, Josef
  Lubrication Science 5 (30): 207-228 (2018-08)
  Verlags DOI
• Feasibility evaluation of establishing a monocrystalline silicon PV solar power plant for three locations in Iraq, case study - Journal Article
  Hahsim, Emad Talib; Jobair, Hussein K.; Abdullah, Oday Ibraheem
  International Journal of Mechanical Engineering and Technology 8 (9): 929-938 (2018-08)
  
• Similarity and numerical analysis of the generalized Levèque problem to predict the thermal boundary layer - Journal Article
  Belhocine, Ali; Abdullah, Oday Ibraheem
  International Journal on Interactive Design and Manufacturing 3 (12): 1015-1025 (2018-08-01)
  Verlags DOI
• An investigation of dynamic behavior of the cylindrical shells under thermal effect - Journal Article
  Hamzah, Adawiya Ali; Jobair, Hussein K.; Abdullah, Oday Ibraheem; Hashim, Emad Talib; Sabri, Laith Abed
  Case Studies in Thermal Engineering (12): 537-545 (2018-09-01)
  Open Access | Verlags DOI
• The topology of the leg joints of the beetle Pachnoda marginata (Scarabaeidae, Cetoniinae) and its implication for the tribological properties - Journal Article
  Vagts, Steffen; Schlattmann, Josef; Kovalev, Alexander; Gorb, Stanislav N.
  Biomimetics 3 (2): Artikel Nr. 3020012 (2018)
  Open Access | Verlags DOI
• Automated process planning and production control for additive manufacturing - Journal Article
  Emmelmann, Claus; Rudolph, Jan-Peer; Güntzer, Felix; Zühlke, Sandra
  ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 6 (113): 398-401 (2018-06)
  Verlags DOI
• Tribological classification schemes and their application (Part 2) - Journal Article
  Krasmik, V.; Seibel, Arthur; Schlattmann, Josef
  Tribologie und Schmierungstechnik 3 (65): 27-34 (2018-05)
  
• Self-learning calculation for selective laser melting - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (67): 185-190 (2018)
  Open Access | Verlags DOI
• On the direct kinematics problem of parallel mechanisms - Journal Article
  Seibel, Arthur; Schulz, Stefan; Schlattmann, Josef
  Arthur Seibel, Stefan Schulz, and Josef Schlattmann, “On the Direct Kinematics Problem of Parallel Mechanisms,” Journal of Robotics, vol. 2018, Article ID 2412608, 9 pages, 2018. doi:10.1155/2018/2412608
  Open Access | Verlags DOI
• Tribological classification schemes and their application (Part 1) - Journal Article
  Krasmik, V.; Seibel, Arthur; Schlattmann, Josef
  Tribologie und Schmierungstechnik 2 (65): 5-15 (2018-03)
  
• How powder characteristics influence: The part properties of laser beam melted titanium - Journal Article
  Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus
  LIA Today 1 (26): 10-12 (2018-01)
  
• Additive Manufacturing: Printing the future of particle-foam processing - Journal Article
  Schütz, Johannes; Beck, Jonas; Schmiedeck, Marcus; Emmelmann, Claus
  Kunststoffe International 8 (108): 32-35 (2018)
  
• Cloudbasierte Potentialerschließung in der additiven Fertigung - Thesis
  Rudolph, Jan-Peer
  Berlin : Springer Vieweg (2018)
  
• Evolutionary-based optimization strategy in a hybrid manufactured process using LMD - Journal Article
  Ewald, Ake; Sassenberg, Torben; Schlattmann, Josef
  Procedia CIRP (74): 163-167 (2018)
  Open Access | Verlags DOI
• From powder to solid: The material evolution of Ti-6Al-4V during laser metal deposition - Conference Paper
  Surrey, Philipp; Möller, Mauritz; Emmelmann, Claus; Heilemann, Markus; Weber, Julian
  Key Engineering Materials (770 KEM): 135-147 (2018)
  Verlags DOI
• Gestaltung von Fabrikstrukturen für die additive Fertigung - Thesis
  Möhrle, Markus
  Berlin : Springer Vieweg (2018)
  
• Integrated curvature sensing of soft bending actuators using inertial measurement units - Conference Paper
  Seibel, Arthur; Schiller, Lars
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (9): (2018)
  Verlags DOI
• Laser metal deposition of bionic aluminum supports: reduction of the energy input for additive manufacturing of a fuselage - Conference Paper
  Heilemann, Markus; Beckmann, Jaco; Konigorski, Detlev; Emmelmann, Claus
  Procedia CIRP (74): 136-139 (2018)
  Open Access | Verlags DOI
• Post-processing of additively manufactured cutting edges by laser ablation - Conference Paper
  Hallmann, Sina; Wolny, Tim; Emmelmann, Claus
  Procedia CIRP (74): 276-279 (2018)
  Open Access | Verlags DOI
• Prozessgüte für das Laserstrahltrennen kohlenstofffaserverstärkter Kunststoffe - Thesis
  Canisius, Marten
  Berlin : Springer Vieweg (2018)
  
• Solution for the Direct Kinematics Problem of the General Stewart-Gough Platform by Using only Linear Actuators’ Orientations - Conference Paper
  Schulz, Stefan; Seibel, Arthur; Schlattmann, Josef
  International Symposium on Advances in Robot Kinematics (ARK 2018)
  Verlags DOI
• Systematic study of the effect of non-uniform seal stiffness on the contact stress in flat-faced soft-seated spring operated pressure relief valves - Conference Paper
  Schimanowski, Alex; Seibel, Arthur; Schlattmann, Josef
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (13): V013T05A044 (2018)
  Verlags DOI
• The influence of frictional facing thickness on the contact pressure distribution of multi-disc dry clutches - Journal Article
  Abdullah, Oday Ibraheem; Rasham, Ali M.; Jobair, Hussein K.
  FME Transactions 1 (46): 33-38 (2018)
  Open Access | Verlags DOI
• Werkstoff- und Prozessverhalten von Metallpulvern in der laseradditiven Fertigung - Thesis
  Seyda, Vanessa
  Shaker Verlag (2018)
  

2017

• Sensor concept for solving the direct kinematics problem of the Stewart-Gough platform - Conference Paper
  Schulz, Stefan; Seibel, Arthur; Schreiber, Daniel; Schlattmann, Josef
  IEEE International Conference on Intelligent Robots and Systems (2017-September): 8206015, 1959-1964 (2017-12-13)
  Verlags DOI
• Thermoelastic analysis of grooved friction clutches using finite element method - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef
  Tribology Transactions 6 (60): 1011-1021 (2017-11-02)
  Verlags DOI
• Development of an adaptive, self-learning control concept for an additive manufacturing process - Journal Article
  Renken, Volker; Albinger, Stephan; Goch, Gert; Neef, Arne; Emmelmann, Claus
  CIRP Journal of Manufacturing Science and Technology (19): 57-61 (2017-11)
  Verlags DOI
• The application of multi-body simulation approach in the kinematic analysis of beetle leg joints - Journal Article
  Vagts, Steffen; Schlattmann, Josef; Bußhardt, Philipp; Kleinteich, Thomas; Gorb, Stanislav N.
  Artificial Life and Robotics 4 (22): 412-420 (2017-12-01)
  Verlags DOI
• Study of the friction and wear behavior of metal/polymer-metal multi-material configurations - Journal Article
  Krasmik, Viktor; Schlattmann, Josef
  Key Engineering Materials (739): 211-219 (2017)
  Verlags DOI
• Characterization of the anisotropic properties for laser metal deposited Ti-6Al-4 V - Journal Article
  Möller, Mauritz; Ewald, Ake; Weber, Julian; Heilemann, Markus; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022308 (2017-05-01)
  Verlags DOI
• Process monitoring of laser remote cutting of carbon fiber reinforced plastics by means of reflecting laser radiation - Journal Article
  Oberlander, Max; Bartsch, Katharina; Schulte, C.; Canisius, Marten; Hergoss, Philipp; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022009 (2017-05-01)
  Verlags DOI
• Relationship between powder characteristics and part properties in laser beam melting of Ti-6Al-4V, and implications on quality - Journal Article
  Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications 2 (29): 022311 - (2017-05-01)
  Verlags DOI
• Analysis of design guidelines for automated order acceptance in additive manufacturing - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (60): 187-192 (2017)
  Open Access | Verlags DOI
• The temperatures distributions of a single-disc clutches using heat partitioning and total heat generated approaches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Majeed, Mahir H.; Sabri, Laith Abed
  Case Studies in Thermal Engineering (11): 43-54 (2018-03)
  Open Access | Verlags DOI
• A cloud-based platform for automated order processing in additive Manufacturing - Journal Article
  Rudolph, Jan-Peer; Emmelmann, Claus
  Procedia CIRP (63): 412-417
  Open Access | Verlags DOI
• Ermüdungseigenschaften der laseradditiv gefertigten Titanlegierung TiAl6V4 - Thesis
  Wycisk, Eric
  Springer Vieweg, Light Engineering für die Praxis : (2017)
  
• Friction-induced vibrations during tightening of bolted joints: insights from a multi-body model - Conference Paper
  Baramsky, Nicolaj; Seibel, Arthur; Schlattmann, Josef
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (4a): (2017)
  Verlags DOI
• Laser metal deposition of Ti-6Al-4V structures: Analysis of the build height dependent microstructure and mechanical properties - Conference Paper
  Heilemann, Markus; Möller, Mauritz; Emmelmann, Claus; Burkhardt, Irmela; Riekehr, Stefan; Ventzke, Volker; Kashaev, Nikolai; Enz, Josephin
  Materials Science and Technology Conference and Exhibition 2017 (1): 312-320 (2017)
  Verlags DOI
• Methoden zur Ermittlung montagerelevanter Eigenschaften in der Automobilindustrie mithilfe von Konnektivitätsgraphen - Thesis
  Hoffmann-Berling, Philipp
  Sierke Verlag, Konstruktionsmethodik und Produktentwicklung 8: (2017)
  
• Methodik und Richtlinien für die Konstruktion von laseradditiv gefertigten Leichtbaustrukturen - Thesis
  Kranz, Jannis
  Berlin : Springer Vieweg (2017)
  Verlags DOI
• Methodological support for the selection of simplified equations of state for modeling technical fluids - Conference Paper
  Schimanowski, Alex; Seibel, Arthur; Schlattmann, Josef
  ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (11): (2017)
  Verlags DOI
• Zur Ableitung tribologischer Lösungen mit Hilfe von Ordnungsschemata - Thesis
  Krasmik, Viktor
  Sierke Verlag, Konstruktionsmethodik und Produktentwicklung 9: (2017)
  

2016

• Laser scored machining of fiber reinforced plastics to prevent delamination - Journal Article
  Hintze, Wolfgang; Cordes, Marcel; Geis, Tobias; Blühm, Melchior Frieder; Emmelmann, Claus; Canisius, Marten
  Procedia Manufacturing (6): 1-8 (2016)
  Open Access | Verlags DOI
• Robot system for the sustainable mobility assurance in the assistance and care - Conference Paper
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  Proceedings of IEEE Workshop on Advanced Robotics and its Social Impacts, ARSO (2016-November): 7736252, 32-36 (2016-11-04)
  Verlags DOI
• Design for laser additive manufacturing - Book Part
  Emmelmann, Claus; Herzog, Dirk; Kranz, Jannis
  Laser Additive Manufacturing: Materials, Design, Technologies, and Applications : 259-279 (2016-09-27)
  Verlags DOI
• Additive manufacturing of metals - Journal Article
  Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus
  Acta Materialia (117) : 371-392 (2016-09-15)
  Verlags DOI
• Thermal behavior of friction clutch disc based on uniform pressure and uniform wear assumptions - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef
  Friction 3 (4): 228-237 (2016-09-01)
  Open Access | Verlags DOI
• Design measures for reducing static friction in tribological systems - Journal Article
  Seibel, Arthur
  Konstruktion 7-8 (68): 72-74 (2016-07)
  
• Temperature analysis of a pin-on-disc tribology test using experimental and numerical approaches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef
  Friction 2 (4): 135-143 (2016)
  Open Access | Verlags DOI
• Friction and wear measurements with an adapted ball-on-pyramid test setup - Conference Paper
  Krasmik, Viktor; Schlattmann, Josef
  Tribology Online 2 (11): 130-139 (2016)
  Verlags DOI
• New prototype of the two-legged robot CENTAUROB - Conference Paper
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  Proceedings of the ASME International Mechanical Engineering Congress and Exposition (11): (2016)
  Verlags DOI
• Laser cutting of carbon fibre reinforced plastics of high thickness - Journal Article
  Herzog, Dirk; Schmidt-Lehr, Matthias; Oberlander, Max; Canisius, Marten; Radek, Markus; Emmelmann, Claus
  Materials and Design (92) : 742-749 (2016-02-15)
  Verlags DOI
• Picosecond laser processing of polycrystalline cubic boron nitride - A method to examine the ablation behavior of a high cubic boron nitride content grade material - Journal Article
  Daniel, Christian; Ostendorf, Sven; Hallmann, Sina; Emmelmann, Claus
  Journal of Laser Applications 1 (28): 012001 (2016-02-01)
  Verlags DOI
• Analysis of residual stress formation in additive manufacturing of Ti-6Al-4V - Conference Paper
  Möller, Mauritz; Herzog, Dirk; Wischeropp, Tim Marten; Emmelmann, Claus; Krywka, Christina; Staron, Peter; Munsch, Maximilian
  Materials Science and Technology Conference and Exhibition 2016 (1): 43-50 (2016)
  
• Evolutionary-based design and control of geometry aims for AMD-manufacturing of Ti-6Al-4V parts - Journal Article
  Möller, Mauritz; Baramsky, Nicolaj; Ewald, Ake; Emmelmann, Claus; Schlattmann, Josef
  Physics Procedia (83): 733-742 (2016-01-01)
  Open Access | Verlags DOI
• IR-thermography for quality prediction in selective laser deburring - Journal Article
  Möller, Mauritz; Conrad, Christian; Haimerl, Walter; Emmelmann, Claus
  Physics Procedia (83): 1261-1270 (2016-01-01)
  Open Access | Verlags DOI
• Influence of an angular hatching exposure strategy on the surface roughness during picosecond laser ablation of hard materials - Journal Article
  Daniel, Christian; Manderla, Jannik; Hallmann, Sina; Emmelmann, Claus
  Physics Procedia (83): 135-146 (2016-01-01)
  Open Access | Verlags DOI
• Influence of process parameters on the quality of aluminium alloy en AW 7075 using Selective Laser Melting (SLM) - Journal Article
  Kaufmann, Niko; Imran, Muhammad; Wischeropp, Tim Marten; Emmelmann, Claus; Siddique, Shafaqat; Walther, Frank
  Physics Procedia (83): 918-926 (2016-01-01)
  Open Access | Verlags DOI
• The parallel two-legged walking robot centaurob - Book Part
  Du, Shucen; Schlattmann, Josef; Schulz, Stefan; Seibel, Arthur
  Parallel Manipulators: Design, Applications and Dynamic Analysis: 101-142 (2016)
  

2015

• Computed tomography for characterization of fatigue performance of selective laser melted parts - Journal Article
  Siddique, Shafaqat; Imran, Muhammad; Rauer, Miriam; Kaloudis, Michael; Wycisk, Eric; Emmelmann, Claus; Walther, Frank
  Materials & Design (83): 661-669 (2015-10-15)
  Verlags DOI
• Influences of post processing on laser powder bed fused Ti-6Al-4V part properties - Conference Paper
  Jahn, Simon; Seyda, Vanessa; Emmelmann, Claus; Sändig, Sabine
  Materials Science and Technology Conference and Exhibition (1): 69-76 (2015-10)
  
• Manufacturing of Medical Implants by Combination of Selective Laser Melting and Laser Ablation - Journal Article
  Hallmann, Sina; Glockner, P.; Daniel, Christian; Seyda, Vanessa; Emmelmann, Claus
  Lasers in Manufacturing and Materials Processing 3 (2): 124-134 (2015-09-01)
  Verlags DOI
• Laser cutting of carbon fiber-reinforced plastic with an absorber transparent for visible spectrum - Journal Article
  Canisius, Marten; Herzog, Dirk; Schmidt-Lehr, Matthias; Oberlander, Max; Direnga, Julie; Emmelmann, Claus
  Journal of Laser Applications 3 (27): 032003 (2015-08-01)
  Verlags DOI
• Effect of surface roughness on the thermoelastic behaviour of friction clutches - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Lytkin, Michael
  FME Transactions 3 (43): 241-248 (2015)
  Open Access | Verlags DOI
• Influence of pin size on tensile and fatigue behavior of TI-CFRP hybrid structures produced by laser additive manufacturing - Conference Paper
  Huelsbusch, Daniel; Haack, Matthias; Solbach, Andreas; Emmelmann, Claus; Walther, Frank
  ICCM International Conferences on Composite Materials (2015-07)
  
• Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting - Journal Article
  Siddique, Shafaqat; Imran, Muhammad; Wycisk, Eric; Emmelmann, Claus; Walther, Frank
  Journal of Materials Processing Technology (221): 205-213 (2015-07)
  Verlags DOI
• Investigations on the process strategy of laser remote cutting of carbon fiber reinforced plastics with a thickness of more than 5 MM - Conference Paper
  Schmidt-Lehr, Matthias; Oberlander, Max; Herzog, Dirk; Canisius, Marten; Radek, Markus; Emmelmann, Claus
  ICCM International Conferences on Composite Materials: (2015-07)
  
• Performance of various designs of hybrid loop-loaded CFRP-titanium straps - Conference Paper
  Büttemeyer, Holger; Schiebel, Patrick; Solbach, Andreas; Emmelmann, Claus; Herrmann, Axel S.
  ICCM International Conferences on Composite Materials: (2015-07)
  
• Finite element analysis of transient thermoelastic behavior in multi-disc clutches - Conference Paper
  Abdullah, Oday Ibraheem; Al-Sahb, Wassan Abd; Al-Shabibi, Abdullah M.
  SAE Technical Papers April (2015): (2015-04-14)
  Verlags DOI
• Effect of Al₂ Gd on microstructure and properties of laser clad Mg-Al-Gd coatings - Journal Article
  Chen, Hong; Zhang, Ke; Yao, Chengwu; Dong, Jie; Li, Zhuguo; Emmelmann, Claus
  Applied Surface Science (330): 393-404 (2015-03-01)
  Verlags DOI
• Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4 - Journal Article
  Kranz, Jannis; Herzog, Dirk; Emmelmann, Claus
  Journal of Laser Applications S1 (27): S14001 (2015-02-01)
  Verlags DOI
• Laser cutting of carbon fiber reinforced plastic using a 30 kW fiber laser - Conference Paper
  Herzog, Dirk; Schmidt-Lehr, Matthias; Canisius, Marten; Oberlander, Max; Tasche, Jan Philipp; Emmelmann, Claus
  Journal of Laser Applications S2 (27): S28001 (2015-02-01)
  Verlags DOI
• A new proceeding of control strategy for a parallel structural biped robot - Conference Paper
  Du, Shucen; Schlattmann, Josef
  Assistive Robotics: Proceedings of the 18th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2015: 405-412 (2015)
  Verlags DOI
• An Analytical approach to evaluating nonmonotonic functions of fuzzy numbers - Journal Article
  Seibel, Arthur; Schlattmann, Josef
  Open Access | Verlags DOI
• Experimental investigation of the friction and wear behaviour with an adapted ball-on-prism test setup - Journal Article
  Krasmik, Viktor; Schlattmann, Josef
  Tribology in Industry 3 (37): 291-298 (2015)
  Open Access
• Fatigue Performance of Laser Additive Manufactured Ti–6al–4V in Very High Cycle Fatigue Regime up to 1E9 Cycles - Journal Article
  Wycisk, Eric; Siddique, Shafaqat; Herzog, Dirk; Walther, Frank; Emmelmann, Claus
  Frontiers in Materials : Structural Materials 2:72
  Open Access | Verlags DOI
• Surface morphology and fracture strength analysis of nanosecond ablated alumina - Journal Article
  Ribas Gomes, Diego; Hallmann, Sina; Daniel, Christian; Fredel, Márcio Celso; Janßen, Rolf
  Journal of the Ceramic Society of Japan 1435 (123) : 160-166 (2015)
  Verlags DOI

2014

• Structural and contact analysis of disc brake assembly during single stop braking event - Journal Article
  Belhocine, Ali; Abu Bakar, Abd Rahim; Abdullah, Oday Ibraheem
  Transactions of the Indian Institute of Metals 68 (3): 403-410 (2015-06-15)
  Verlags DOI
• Investigation of thermo-elastic behavior of multidisk clutches - Journal Article
  Abdullah, Oday Ibraheem; Akhtar, Mumtaz Jamil; Schlattmann, Josef
  Journal of Tribology 1 (137): 011703 (2015-01-01)
  Verlags DOI
• Forschungsschwerpunkt Maritime Systeme - Zukunft gestalten - Forschung und wissenschaftliche Ausbildung - Book
  Müller, Sven-Brian; Krüger, Stefan; Abdel-Maksoud, Moustafa; Rung, Thomas; Ackermann, Günter; Fricke, Wolfgang; Düster, Alexander; Wirz, Friedrich; Kreuzer, Edwin; Pick, Marc-André; Lödding, Hermann; Friedewald, Axel; Grabe, Jürgen; Jahn, Carlos; Emmelmann, Claus
  Open Access
• An Extended analytical approach to evaluating monotonic functions of fuzzy numbers - Journal Article
  Seibel, Arthur; Schlattmann, Josef
  Advances in Fuzzy Systems, vol. 2014, Article ID 892363, 9 pages, 2014.
  Open Access | Verlags DOI
• Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties - Journal Article
  Wycisk, Eric; Solbach, Andreas; Siddique, Shafaqat; Herzog, Dirk; Walther, Frank; Emmelmann, Claus
  Physics Procedia C (56): 371-378 (2014-01-01)
  Open Access | Verlags DOI
• General systems theory in a horizontal and vertical action process for cross-disciplinary knowledge transfer - Conference Paper
  Vagts, Steffen; Schlattmann, Josef
  Proceedings of the ASME International Mechanical Engineering Congress and Exposition - 2013 : presented at ASME 2013 International Mechanical Engineering Congress and Exposition ; November 15 - 21, 2013, San Diego, California, USA. - New York, NY : ASME. - Vol. 12 (2014).
  Verlags DOI
• Low coherence interferometry in selective laser melting - Journal Article
  Neef, Arne; Seyda, Vanessa; Herzog, Dirk; Emmelmann, Claus; Schönleber, Martin; Kogel-Hollacher, Markus
  Physics Procedia C (56): 82-89 (2014-01-01)
  Open Access | Verlags DOI

2013

• High cycle fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting - Conference Paper
  Wycisk, Eric; Emmelmann, Claus; Siddique, Shafaqat; Walther, Frank
  Manufacturing Science and Technology (ICMST2013) : Selected, Peer Reviewed Papers from the 2013 4th International Conference on Manufacturing Science and Technology (ICMST 2013), August 3-4, 2013, Dubai, UAE. - Zurich : Trans Tech Publishers, 2013. - Seite 134-139
  Verlags DOI
• Contact analysis of a dry friction clutch system - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef
  ISRN Mechanical Engineering, vol. 2013, Article ID 495918, 9 pages, 2013
  Open Access | Verlags DOI
• Experimental and analytical investigation of cemented tungsten carbide ultra-short pulse laser ablation - Conference Paper
  Calderón Urbina, Juan Pablo; Daniel, Christian; Emmelmann, Claus
  Physics Procedia (41): 752-758 (2013)
  Open Access | Verlags DOI
• Laser additive manufacturing of gas permeable structures - Conference Paper
  Klahn, Christoph; Bechmann, Florian; Hofmann, Siegfried; Dinkel, Michael; Emmelmann, Claus
  Physics Procedia (41): 873-880 (2013)
  Open Access | Verlags DOI
• Effect of band contact on the temperature distribution for dry friction clutch - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef
  Tribology in Industry 4 (35): 317-329 (2013)
  Open Access
• Optimization of shape and design parameters of the rigid clutch disc using FEM - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Pireci, Emir
  FME Transactions 4 (41): 317-324 (2013)
  Open Access
• Stresses and deformations analysis of a dry friction clutch system - Journal Article
  Abdullah, Oday Ibraheem; Schlattmann, Josef; Al-Shabibi, Abdullah M.
  Tribology in Industry 2 (35): 155-162 (2013)
  Open Access
• Technical impact on the future engineering education - Conference Paper
  Schlattmann, Josef
  2013 International Conference on Interactive Collaborative Learning (ICL 2013) : Kazan, Russia, 25 - 27 September 2013 ; [in conjunction with the 42nd International Conference on Engineering Pedagogy (IGIP)] / [supported by] IEEE; [IGIP ...]. - Piscataway, NJ : IEEE, 2013. - Art.-Nr. 6644693, i.e. Seite 728-733
  Verlags DOI
• Towards understanding frictional properties of articular joints in beetle legs : μCT-based 3D model and multi-body simulation of joint kinematics - Conference Paper
  Vagts, Steffen; Haschke, Henning; Schlattmann, Josef; Kleinteich, Thomas; Bußhardt, Philipp; Pullwitt, Tom; Gorb, Stanislav N.
  WTC 2013 5th World Tribology Congress : September, 8 - 13, 2013, Palaolimpico, Torino, Italy / promoted by Associazione Italiana di Tribologia. - Torino. - Vol. 2 (2013), Seite 1348-135
  

2012

• Investigation of aging processes of Ti-6Al-4V powder material in laser melting - Journal Article
  Seyda, Vanessa; Kaufmann, Niko; Emmelmann, Claus
  Physics Procedia (39): 425-431 (2012)
  Open Access | Verlags DOI

2011

• Analysis of laser ablation of CFRP by ultra-short laser pulses with short wavelength - Journal Article
  Emmelmann, Claus; Petersen, Maren; Goeke, André; Canisius, Marten
  Physics Procedia PART 1 (12): 565-571 (2011-01-01)
  Open Access | Verlags DOI
• Laser additive manufacturing of modified implant surfaces with osseointegrative characteristics - Journal Article
  Emmelmann, Claus; Scheinemann, Peter; Munsch, Martin; Seyda, Vanessa
  Physics Procedia PART 1 (12): 375-384 (2011-01-01)
  Open Access | Verlags DOI
• Analysis of the influence of burst-mode laser ablation by modern quality tools - Journal Article
  Emmelmann, Claus; Calderón Urbina, Juan Pablo
  Physics Procedia PART 2 (12): 172-181 (2011-01-01)
  Open Access | Verlags DOI
• Development of plasma-laser-hybrid welding process - Journal Article
  Emmelmann, Claus; Kirchhoff, Marc; Petri, Nikolai
  Physics Procedia PART 1 (12): 194-200 (2011-01-01)
  Open Access | Verlags DOI
• High-precision calibration of a weld-on-the-fly-system - Journal Article
  Emmelmann, Claus; Schenk, Kerstin; Wollnack, Jörg; Kirchhoff, Marc
  Physics Procedia PART 1 (12): 739-743 (2011-01-01)
  Open Access | Verlags DOI
• Process and mechanical properties: Applicability of a scandium modified Al-alloy for laser additive manufacturing - Journal Article
  Schmidtke, Katja; Palm, Frank; Hawkins, A.; Emmelmann, Claus
  Physics Procedia PART 1 (12): 369-374 (2011-01-01)
  Open Access | Verlags DOI
• Systematic development of lightweight components for highly dynamic laser-remote-scanners using topology optimization - Journal Article
  Emmelmann, Claus; Kirchhoff, Marc; Beckmann, Frank
  Physics Procedia (12): 459-464 (2011-01-01)
  Open Access | Verlags DOI

2010

• Influence of laser cutting parameters on CFRP part quality - Conference Paper
  Goeke, André; Emmelmann, Claus
  Physics Procedia PART 2 (5): 253-258 (2010-01-01)
  Open Access | Verlags DOI