Publications, Journals

2020

Steffen, C., Sellenschloh, K., Vollmer, M., Morlock, M.M., Heiland, M., Huber, G., Rendenbach, C.	Biomechanical comparison of titanium miniplates versus a variety of CAD/CAM plates in mandibular reconstruction	JMBBM (2020), 111, 104007: 1-7
Polster, V., Hube, R., Morlock, M.M.	Gross Stem Taper Failure with Head Dissociation in a Very Active Patient with an Uncemented Femoral Stem	JBJS Case Connector (2020), 10(3):1-5
Morlock, M., Hube, R., Wassilew, G., Prange, F., Huber, G., Perka, C.	Taper corrosion: a complication of total hip arthroplasty	EFORT Open Rev 2020;5:776-784
Guttowski, D., Polster, V., Huber, G., Morlock, M.M., Püschel, K., Nüchtern, J.	Comparative biomechanical in-vitro study of different modular total knee arthroplasty revision stems with bone defects	Journal of Arthroplasty (2020), 35(11): 3318-3325
Messer-Hannemann, P., Weyer, H., Campbell, G.M., Morlock, M.M.	Time-dependent viscoelastic response of acetabular bone and implant seating during dynamic implantation of press-fit cups	Medical Engineering & Physics 81 (2020), Pages 68-76
Zobel, S.M., Morlock, M.M., Huber,G.	Fatigue strength reduction of Ti-6Al-4V titanium alloy after contact with high-frequency cauterising instruments	Medical Engineering and Physics 81 (2020) 58–67
Haschke, H., Falkenberg, A., Morlock, M., Huber, G.	Do SiNx coatings bear the potential to reduce the risk of micromotion in modular taper junctions?	Proc IMechE Part H: Journal of Engineering in Medicine (2020), 9(234):897-908
Grünherz, L., Prein, C., Winkler, T., Kirsch, M., Hopfner, U., Streichert, T., Clausen-Schaumann, H., Zustin, J., Kirchhof, K., Morlock, M.M., Machens, H.-G.,Schilling, A.F.	Osteoidosis leads to altered differentiation and function of osteoclasts	J Cell Mol Med. 2020, 24(10):5665-5674
Ntalos, D., Huber, G., Sellenschloh, K., Saito, H., Püschel, K., Morlock, M.M., Frosch, K.H., Klatte, T.O.	Ausriss von All-suture-Ankern verursacht geringere Knochenschäden und ist von der Kortikalisdicke abhängig	Arthroskopie (2020), Preisträgerarbeit, 5(33): 378-385
Bätz, J., Syrigos, S., Vorbeck, M., Prüch, E., Campbell, G., Morlock, M.	The influence of broach design on bone friction and osseodensification in total hip arthroplasty	Clin Biomech (Bristol, Avon), 2020, 73:234-240
Bechstedt, M., Gustafson, J.A., Mell, S.P., Gührs, J., Morlock, M.M., Levine, B.R., Lundberg, H.J.	Contact Conditions for Total Hip Head-Neck Modular Taper Junctions with Microgrooved Stem Tapers	Journal of Biomechanics (2020), Volume 103,109689:1-7
Lossau, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.	Learning metal artifact reduction in cardiac CT images with moving pacemakers	Med Image Anal. (2020), 61:101655:1-14
Lützner, J., Günther, KP., Postler, A., Morlock, M.	Metallionenfreisetzung nach Hüft- und Kniegelenkendoprothetik – Mechanismen, biologische Wirkungen und notwendige Diagnostik	Zeitschrift für Orthopädie und Unfallchirurgie (2020), 5(158):369-382
Grupp, T.M., Baxmann, M., Jansson, V., Windhagen, H., Heller, K.-D., Morlock, M.M., Knaebel H.-P.	How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revision	Materials (Basel). 2020 Mar 2;13(5):1098
Weiser, L., Sellenschloh, K., Püschel, K., Morlock, M.M., Viezens, L., Lehamnn, W., Huber, G.	Reduced cement volume does not affect screw stability in augmented pedicle screws	European Spine Journal (2020), 29:1297–1303
Auerswald, M., Messer-Hannemann, P., Sellenschloh, K., Wahlefeld, J., Püschel, K., Hirschfeld Araujo, S., Morlock, M.M., Huber, G.	Lag-screw osteosynthesis in thoracolumbar pincer-fractures	Global Spine Journal (2020):1-10
Falkenberg, A., Dickinson, E.C., Morlock, M.M.	Adapter sleeves are essential for ceramic heads in hip revision surgery	Clinical Biomechanics (2020), 71:1–4
Falkenberg, A., Biller, S., Morlock, M., Huber, G.	Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors	Journal of Biomechanics (2020), 98:1-8
Steffen, C., Sellenschloh, K., Polster, V., Heyland, M., Vollmer, M., Morlock, M.M., Heiland, M., Huber, G., Redenbach, C.	Biomechanical comparison of polylactide-based versus titanium miniplates in mandible reconstruction in vitro	Journal of Stomatology, Oral and Maxillofacial Surgery (2020), 121(4):377-382

2019

Matar, H., Kay, E., Morlock, M., Board, T.	The hammer: instrument of Thor (and orthopaedic surgeons)	BMJ 2019; 367: l6648, 1-3
Lützner, J., Günther, KP., Postler, A., Morlock, M.	Metal Ion Release after Hip and Knee Arthroplasty - Causes, Biological Effects and Diagnostics	Z Orthop Unfall (2020) 158(4): 369-382
Messer-Hannemann P., Campbell, G.M., Morlock, M.M.	Deformation of acetabular press-fit cups: Influence of design and surgical factors	Clin Biomech (Bristol, Avon) (2019), 69:96-103
Lamb, J.N., Baetz, J., Messer-Hannemann, P., Adekanmbi, I., van Duren, B.H., Redmond, A., West, R.M., Morlock, M.M., Pandit, H.G.	A calcar collar is protective against early periprosthetic femoral fracture around cementless femoral components in primary total hip arthroplasty: a registry study with biomechanical validation	Bone Joint J (2019),101-B(7):779-786
Lossau Née Elss, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.	Motion Estimation and Correction in Cardiac CT Angiography Images using Convolutional Neural Networks	Comput Med Imaging Graph (2019), 76:101640
Ntalos, D., Sellenschloh, K., Huber, G., Briem, D., Püschel, K., Morlock, M.M., Frosch, K.-H., Fensky, F., Klatte, T.O.	Biomechanical analysis of conventional anchor revision after all-suture anchor pullout - a human cadaveric shoulder model	J Shoulder Elbow Surg (2019), 28(12): 2433-2437
Ntalos, D., Sellenschloh, K., Huber, G., Briem, D., Püschel, K., Morlock, M.M., Frosch, K.-H., Fensky, F., Klatte, T.O.	Conventional rotator cuff versus all-suture anchors - a biomechanical study focusing on the insertion angle in an unlimited cyclic model	PLoS One (2019), 14(11):1-13
Haschke, H., Konow, T., Huber, G., Morlock, M.M.	Influence of flexural rigidity on micromotion at the head-stem taper interface of modular hip prostheses	Med Eng Phys (2019), 68:1-10
Dickinson, E.C., Sellenschloh, K., Morlock, M.M.	Impact of stem taper damage on the fracture strength of ceramic heads with adapter sleeves	Clin Biomech (Bristol, Avon) (2019), 63:193-200
Messer-Hannemann, P., Bätz, J., Lampe, F., Klein, A., Püschel, K., Campbell, G.M., Morlock, M.	The influence of cavity preparation and press-fit cup implantation on restoring the hip rotation center	Clin Biomech (Bristol, Avon) (2019), 63:185-192
Bätz, J., Messer-Hannemann, P., Lampe, F., Klein, A., Püschel, K., Morlock, M.M., Campbell, G.M.	Effect of cavity preparation and bone mineral density on bone-interface densification and bone-implant contact during press-fit implantation of hip stems	J Orthop Res (2019), 37(7):1580-1589
Benignus, C., Morlock, M., Beckmann, J.	Total hip arthroplasty in young patients : Bearings and custom-made prostheses	Orthopäde (2019), 48(4):292-299
Falkenberg, A., Drummen, P., Morlock, M.M., Huber, G.	Determination of local micromotion at the stem-neck taper junction of a bi-modular total hip prosthesis design	Med Eng Phys (2019), Volume 65: 31-38
Rendenbach, C., Steffen, C., Sellenschloh K, Heyland, M., Morlock, M.M., Toivonen, J., Moritz, N., Smeets, R., Heiland, M., Vallittu, P.K., Huber, G.	Patient specific glass fiber reinforced composite versus titanium plate: A comparative biomechanical analysis under cyclic dynamic loading	Journal of the Mechanical Behavior of Biomedical Materials 91 (2019) 212–219
Lossau, T., Nickisch, H., Wissel, T., Bippus, R., Schmitt, H., Morlock, M., Grass, M.	Motion artifact recognition and quantification in coronary CT angiography using convolutional neural networks	Med Image Anal (2019), 52:68-79
Pröve, P.-L., Jopp-van Well, E., Stanczus, B., Morlock, M.M., Herrmann, J., Groth, M., Säring, D., Auf der Mauer, M.	Automated segmentation of the knee for age assessment in 3D MR images using convolutional neural networks	International Journal of Legal Medicine (2019), 133(4):1191-1205

2018

Oberst, S., Baetz, J., Campbell, G., Lampe, F., Lai, J.C.S., Hoffmann, N., Morlock, M.	Vibro-acoustic and nonlinear analysis of cadavric femoral bone impaction in cavity preparations	International Journal of Mechanical Sciences 144 (2018) 739–745
Foelkel, M. C., Herzog, V., Meier, M., Morlock, M.M.	Influence of application parameters of ultrasonic-assisted bone instruments on the tear force of a substitute material for spinal dura mater	Current Directions in Biomedical Engineering 2018; 4(1): 611 – 614
Morlock, M.M., Dickinson, E.C., Günther, K.-P., Bünte, D., Polster, V.	Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip Arthroplasty	J Arthroplasty 2018; 33(11): 3581-3590
Loger, K., Lutter, G., Huenges, K., Frank, D., Groß, J., Cremer, J., Attmann, T., Morlock, M., Pokorny, S.	Transcatheter mitral valve implantation: supra-annular and subvalvular fixation techniques	European Journal of Cardio-Thoracic Surgery 54 (2018) 1013–1021
Dong, X.N., Lu, Y., Krause, M., Huber, G., Chevalier, Y., Leng, H., Maquer, G.	Variogram-based evaluations of DXA correlate with vertebral strength, but do not enhance the prediction compared to aBMD alone	Journal of Biomechanics 77 (2018) 223–227
Kallinowski, F., Harder, F., Gutjahr, D., Raschidi, R., Silva, T.G., Vollmer, M., Nessel, R.	Assessing the GRIP of Ventral Hernia Repair: How to Securely Fasten DIS Classified Meshes	Frontiers in Surgery, Januar 2018, Volume 4, Article 78
Busch, J.D., Schröder, H., Sellenschloh, K., Adam, G., Ittrich, H., Huber, G.	Test method for mechanical properties of implantable catheters according to DIN 10555-3	Journal of the Mechanical Behavior of Biomedical Materials 82 (2018) 183–186
Weiser, L., Huber, G., Sellenschloh, K., Viezens, L., Püschel, K., Morlock, M.M., Lehmann, W.	Time to augment?! Impact of cement augmentation on pedicle screw fixation strength depending on bone mineral density	Eur Spine J. 2018 Aug;27(8): 1964-1971
Krull, A., Morlock, M.M., Bishop, N.E.	Factors influencing taper failure of modular revision hip stems	Medical Engineering and Physics 54 (2018) 65–73
Krull, A., Morlock, M.M., Bishop, N.E.	Maximizing the fixation strength of modular components by impaction without tissue damage	Bone Joint Res (2018);7: 196-204

2017

Morlock, M.M.	Modularity in Orthopaedics	J Trauma Orthopaedics Subspecialty Section (2017), 05(03): 60-62
Baxmann, M., Pfaff, A.M., Schilling, C., Grupp, T.M., Morlock, M.M.	Biomechanical Evaluation of the Fatigue Performance, the Taper Corrosion and the Metal Ion Release of a Dual Taper Hip Prosthesis under Physiological Environmental Conditions	Biotribology 12 (2017) 1–7
Rendenbach, C., Sellenschloh, K., Gerbig, L., Morlock, M.M., Beck-Broichsitter, B., Smeets, R., Heiland, M., Huber, G., Hanken, H.	CAD-CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysis	Journal of Cranio-Maxillo-Facial Surgery 45 (2017) 1878-1883
Buente, D., Bryant, M., Ward, M., Neville, A., Morlock, M., Huber, G.	The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanics	Medical Engineering and Physics 46 (2017) 79–88
Krull, A., Morlock, M.M., Bishop, N.E.	The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip Arthroplasty	Arthroplasty 2017 Oct;32(10):3200-3205
Krull, A., Bishop, N.E., Steffen, N.M., Lampe, F., Püschel, K., Morlock, M.M.	Influence of the compliance of a patient's body on the head taper fixation strength of modular hip implants	Clin Biomech (Bristol, Avon). 2017 Apr 25;46:1-5
Reichl, M., Kueny, R.A., Danyali, R., Obid, P.,Übeyli, H., Püschel, K., Morlock, M.M., Huber, G., Niemeyer, T., Richter, A.	Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw Construct	Clin Spine Surg. 2017 May;30(4):E440-E447
Pokorny, S., Huenges, K., Hansen, J.H., Schadow, Y., Fischer, G., Morlock, M.M., Cremer, J., Lutter, G.	Off-pump mitral valved stent implantation: comparison of apical and subannular fixation techniques	Eur J Cardiothorac Surg. 2017 Jan;51(1):112-118
Morlock, M.M.	Mix & Match	merete&friends Magazin, Sep 2017, S. 9
Weiser, L., Huber, G., Sellenschloh, K., Viezens, L., Püschel, K., Morlock, M.M., Lehmann, W.	Insufficient stability of pedicle screws in osteoporotic vertebrae: biomechanical correlation of bone mineral density and pedicle screw fixation strength	Eur Spine J. (2017) 26:2891–2897
Bryant, M.G., Buente, D., Oladokun, A., Ward, M., Huber, G., Morlock, M., Neville, A.	Surface and subsurface changes as a result of tribocorrosion at the stem-neck interface of bi-modular prosthesis	Biotribology 10 (2017) 1–16
Gührs, J., Körner, M., Bechstedt, M., Krull, A., Morlock, M.M.	Stem taper mismatch has a critical effect on ceramic head fracture risk in modular hip arthroplasty	Clin Biomech (Bristol, Avon). 2017 Jan;41:106-110
Morlock, M.M., Jäger, M.	Endoprothetik des älteren Menschen Biomaterialien, Implantatwahl, Verankerungstechnik	Der Orthopäde, 46(1), 4-17, 2017
Morlock,M., Bünte, D., Gührs, J. and Bishop, N.	Corrosion of the Head-Stem Taper Junction - Are We on the Verge of an Epidemic?	Review Article. HSS J. 2017 Feb;13(1):42-49
Nagel, K. Bishop, N., Schlegel, U., Püschel, K., Morlock, M.	The influence of cement morphology parameters on the strength of the cement-bone interface in tibial tray fixation	JoA, 32 (2017) 563-569
Pokorny, S., Huenges, K., Hansen, J.H., Schadow, Y., Fischer, G., Morlock, M.M., Cremer, J., Lutter, G.	Off-pump mitral valved stent implantation: comparison of apical and sub-annular fixation techniques	European Journal of Cardiothoracic Surgery (EJCTS) 51 (2017) 112–118
Obid P, Danyali R, Kueny R, Huber G, Reichl M, Richter A, Niemeyer T, Morlock M, Püschel K, Übeyli H.	Hybrid Instrumentation in Lumbar Spinal Fusion: A Biomechanical Evaluation of Three Different Instrumentation Techniques	Global Spine J. 2017 Feb;7(1):47-53
Damm, N., Bishop, N.E., Morlock, M.M.	The influence of trabecular bone quality and implantation direction on press-fit mechanics	J Orthop Res. 2017, 224-233
Weiser, L., Nüchtern, J.V., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Hoffmann, M., Lehmann, W., Großterlinden, L.G.	Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repair	Knee Surg Sports Traumatol Arthrosc (2017) 25:2025–2031

2016

Thomsen, F.S.L., Peña, J.A., Lu, Y., Huber, G., Morlock, M., Glüer, C-C., Delrieux, C.A.	A new algorithm for estimating the rod volume fraction and the trabecular thickness from in vivo computed tomography	Med Phys. 2016 Dec;43(12):6598-607
Campbell, G.M., Tiwari, S., Picke, A.K., Hofbauer, C., Rauner, M., Morlock, M.M., Hofbauer, L.C., Glüer, C.C.	Effects of insulin therapy on porosity, non-enzymatic glycation and mechanical competence in the bone of rats with type 2 diabetes mellitus	Bone 91 (2016) 186–193
Weiser, L., Dreimann, M., Huber, G., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.	Cement augmentation versus extended dorsal instrumentation in the treatment of osteoporotic vertebral fractures: a biomechanical comparison	Bone Joint J. 2016 Aug;98-B(8):1099-105. PMID: 27482024
Haschke, H., Bishop, N., Witt, F., Eicke, Y., Morlock, M.	Contamination of modular hip taper interfaces increases post-assembly interface seating	Orthopaedic Proceedings vol. 98-B no. SUPP 8 31 (2016)
Haschke, H., Jauch-Matt, S.Y., Sellenschloh, K., Huber, G., Morlock, M.M.	Assembly force and taper angle difference influence the relative motion at the stem-neck interface of bi-modular hip prostheses	Proc IMechE Part H: J Engineering in Medicine 2016, Vol. 230(7) 690–699
Koper M., Mathijssen, N.M.C., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.	Clinical and Wear Analyses of 9 Large Metal-on-Metal Total Hip Prostheses	PLOS One. 2016 Oct 6;11(10):e0163438
Huber, G., Nagel, K., Skrzypiec, D.M., Klein, A., Püschel, K., Morlock, M.M.	A description of spinal fatigue strength	J Biomech. 49 (2016) 875–880
Morlock, M.M., Bünte, D., Ettema, H., Verheyen, C.C., Hamberg, Ã., Gilbert, J.	Primary hip replacement stem taper fracture due to corrosion in 3 patients	Acta Orthop., 2016; 87(2): 189–192
Skrzypiec, D.M., Nagel, K., Sellenschloh, K., Klein, A., Püschel, K., Morlock, M.M., Huber, G.	Failure of the human lumbar motion-segments resulting from anterior shear fatigue loading	Industrial Health 2016, 54, 308-314

2015

Damm, N., Morlock, M.M., Bishop, N.E.	Friction coefficient and effective interference at the implant-bone interface	JBM 48 (2015) 3517-3521, 2015
Weiser, L., Nüchtern, J.V., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Hoffmann, M., Lehmann, W., Großterlinden, L.G.	Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repair	Knee Surg Sports Traumatol Arthrosc, Published online: 19 December 2015
Kallinowski, F., Baumann, E., Harder, F., Siassi, M., Mahn, A., Vollmer, M., Morlock, M.M.	Dynamic intermittent strain can rapidly impair ventral hernia repair	J Biomech. 48 (2015) 4026-4036
Bünte, D., Huber, G., Bishop, N., Morlock, M.	Quantification of material loss from the neck piece taper junctions of a bimodular primary hip prosthesis. A retrieval study from 27 failed Rejuvenate bimodular hip arthroplasties	Bone Joint J. 2015 Oct;97-B(10):1350-7
Witt, F., Gührs, J., Morlock, M.M., Bishop, N.E.	Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses	PLOS ONE, 2015;10(8):e0135517. PMID: 26280914
Jauch, S.Y., Wallstabe, S., Sellenschloh, K., Rundt, D., Püschel, K., Morlock, M.M., Meenen, N.M., Huber, G.	Biomechanical modelling of impact-related fracture characteristics and injury patterns of the cervical spine associated with riding accidents	Clin Biomech (Bristol, Avon). 2015 Oct;30(8):795-801
Chang Liao, M.L., de Boer, T., Mutoh, H., Raad, N.S., Richter, C., Wagner, E., Downie, B.R., Unsöld, B., Arooj, I., Streckfuss-Bömeke K, Döker, S., Luther, S., Guan, K., Wagner, S., Lehnart, S.E., Maier, L.S., Stühmer, W.., Wettwer, E., van Veen, T.A., Morlock, M.M., Knöpfel, T., Zimmermann, W.H.	Sensing Cardiac Electrical Activity With a Cardiac Myocyte Targeted Optogenetic Voltage Indicator	Circ Res. 2015 Aug 14;117(5):401-12 PMID: 26078285
Weiser, L., Ruppel, A.A., Nüchtern, J.V., Sellenschloh, K., Zeichen, J., Püschel, K., Morlock M.M., Lehmann, W.	Extra- vs. intramedullary treatment of pertrochanteric fractures: a biomechanical in vitro study comparing dynamic hip screw and intramedullary nail	Arch Orthop Trauma Surg. 2015 Aug;135(8):1101-6, Epub 2015 Jun 9
Morlock, M.M.	The taper disaster - how could it happen?	Hip Int. 2015 Jul-Aug;25(4):339-46
Klein, A., Nagel, K., Gührs, J., Poodendaen, C., Püschel, K., Morlock, M.M., Huber, G.	On the Relationship between Stature and Anthropometric Measurements of Lumbar Vertebrae	Science & Justice, 2015 Dec;55(6):383-7
Campbell, G.M., Tiwari, S., Hamann, C., Picke, A.-K., Rauner, M., Huber, G., Pena, J.A., Damm, T., Barkmann, R., Morlock, M.M., Hofbauer, L.C., Glüer, C.C.	Effects of Parathyroid Hormone on Cortical Porosity, Non-enzymatic Glycation and Bone Tissue Mechanics in Rats with Type 2 Diabetes Mellitus	Bone 2015 , Bone 82 (2016) 116–121
Gührs, J., Krull, A., Witt, F., Morlock, M.M.	The influence of stem taper re-use upon the failure load of ceramic heads	Med Eng Phys. 2015 Jun;37(6):545-52, Epub 2015 Apr 20
Weiser, L., Korecki, M.A., Sellenschloh, K., Fensky, F., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.	Interposition sleeve as treatment option for interprosthetic fractures of the femur: a biomechanical in vitro assessment	Int Orthop. 2015 Apr 26;. [Epub ahead of print] PMID: 25913266 [PubMed - as supplied by publisher]
Koper, M.C., Mathijssen, N.M.C., van Ravenswaay Claasen, H.H., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.	Severe wear and pseudotumor formation due to taper mismatch in a total hip arthroplasty	JBJS Case Connect, 2015 Apr 08; 5 (2): e29, (accepted)
Reichl, M., Kueny, R.A., Danyali, R,. Obid, P., Übeyli, H., Püschel, K., Morlock, M.M., Huber, G., Niemeyer, T., Richter, A.	Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw Construct	J Spinal Disord Tech. 2015 Jan 21 [Epub ahead of print]

2014

Weiser, L., Korecki, M.A., Sellenschloh, K., Fensky, F., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.	The role of inter-prosthetic distance, cortical thickness and bone mineral density in the development of inter-prosthetic fractures of the femur: a biomechanical cadaver study	Bone Joint J. 2014 Oct;96-B(10):1378-84
Schlegel, U.J., Püschel, K., Morlock, M.M., Nagel, K.	Effect of tibial tray design on cement morphology in total knee arthroplasty	J Orthop Surg Res. 2014 Nov 29;9:123
Maquer, G., Schwiedrzik, J., Huber, G., Morlock, M.M., Zysset, P.K.	Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion	J Mech Behav Biomed Mater. 2015 Feb;42:54-66, Epub 2014 Nov 11
Werner, P.H. Ettema, H.B., Witt, F., Morlock, M.M., Verheyen, C.C.	Basic principles and uniform terminology for the head-neck junction in hip replacement	Hip Int. 2015 Mar-Apr;25(2):115-9, Epub 2014 Nov 1
Pokorny, S., Huenges, K., Engel, A., Gross, J., Frank, D., Morlock, M.M., Cremer, J., Lutter, G.	In Vivo Quantification of the Apical Fixation Forces of Different Mitral Valved Stent Designs in the Beating Heart	Ann Biomed Eng. 2015 May;43(5):1201-9, Epub 2014 Oct 29
Lu, Y., Engelke, K., Glueer, C., Morlock, M., Huber, G.	The effect of in situ/in vivo 3D QCT image voxel size on the finite element model of human vertebral cancellous bone	Proc Inst Mech Eng H. 2014 Nov;228(11):1208-13
Morlock, M.M., Witt, F., Bishop, N., Behn, R., Dalla Pria, P., Barrow, R., Dymond, I.	Wear of a composite ceramic head caused by liner fracture	Orthopedics. 2014 Jul;37(7):e653-6
Krause, M., Soltau, M., Zimmermann, E.A., Hahn, M., Kornet, J., Hapfelmeier, A., Breer, S., Morlock, M., Wulff, B., Püschel, K., Glueer, C.C., Amling, M., Busse, B.	Effects of long-term alendronate treatment on bone mineralisation, resorption parameters and biomechanics of single human vertebral trabeculae	Eur Cell Mater. 2014 Sep 22;28:152-65
Lu, Y., Krause, M., Bishop, N., Sellenschloh, K., Glüer, C.C., Püschel, K., Amling, M., Morlock, M.M., Huber, G	The role of patient-mode high-resolution peripheral quantitative computed tomography indices in the prediction of failure strength of the elderly women's thoracic vertebral body	Osteoporos Int. 2015 Jan;26(1):237-44, Epub 2014 Aug 19
Siassi, M., Mahn, A., Baumann, E., Vollmer, M., Huber, G., Morlock, M., Kallinowski, F.	Development of a dynamic model for ventral hernia mesh repair	Langenbecks Arch Surg. 2014 Oct;399(7):857-62, Epub 2014 Aug 21
Schlegel, U.J., Bishop, N.,E., Püschel, K., Morlock, M.M., Nagel, K.	Comparison of different cement application techniques for tibial component fixation in TKA	Int Orthop. 2015 Jan;39(1):47-54
Witt, F., Bosker, B.H., Bishop, N.E., Ettema, H.B., Verheyen, C.C., Morlock, M.M.	The Relation Between Titanium Taper Corrosion and Cobalt-Chromium Bearing Wear in Large-Head Metal-on-Metal Total Hip Prostheses: A Retrieval Study	J Bone Joint Surg Am. 2014 Sep 17;96(18):e157
Koper, M.C., Mathijssen, N.M.C., van Ravenswaay Claasen, H.H., Witt, F., Morlock, M.M., Vehmeijer, S.B.W.	Pseudotumor After Bilateral Ceramic-on-Metal Total Hip Arthroplasty A Case Report	JBJS Case connector, Volume 4, Number 1, March 12, 2014
Kueny, R.A., Kolb, J.P., Lehmann, W., Püschel, K., Morlock, M.M., Huber, G.	Influence of the Screw Augmentation Technique and a Diameter Increase on Pedicle Screw Fixation in the Osteoporotic Spine: Pullout versus Fatigue Testing	Eur Spine J. 2014 Oct;23(10):2196-202
Rupprecht, M., Schlickewei, C., Fensky, F., Morlock, M., Püschel, K., Rueger, J.M., Lehmann, W.	Periprosthetic and interimplant femoral fractures : Biomechanical analysis	Unfallchirurg. 2014 Jun 5;. German. PMID: 24893727
Pokorny, S., Huenges, K., Bähr, T., Hansen, J.H., Fischer, G., Gross, J., Morlock, M., Cremer, J., Lutter, G.	Transapical mitral valved stent implantation: enhanced survival and decreased paravaluvlar leakages	International Journal of Cardiology, Epub 2014 Jun 19
Lu, Y., Maquer, G., Museyko, O., Püschel, K., Engelke, K., Zysset, P., Morlock, M., Huber, G.	Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength	J Biomech. 2014 Apr 16;. [Epub ahead of print], PMID: 24818795 [PubMed - as supplied by publisher]
Lu, Y., Engelke, K., Püschel, K., Morlock, M.M., Huber, G.	Influence of 3D QCT scan protocol on the QCT-based finite element models of human vertebral cancellous bone	Med Eng Phys. 2014 May 31;. [Epub ahead of print] PMID: 24894031
Ivicsics, M.F., Bishop, N.E., Püschel, K., Morlock, M.M., Huber, G.	Increase in facet joint loading after nucleotomy in the human lumbar spine	J Biomechanics 47 (2014) 1712-1717, 2014
Schlegel, U.J., Püschel, K., Morlock, M.M., Nagel, K.	An in vitro comparison of tibial tray cementation using gun pressurization or pulsed lavage	Int Orthop. (2014)38:967-971, 2014
Berteau, J.P., Mielke, G., Morlock, M.M., Huber, G.	Morphological and biomechanical analyses of the subchondral mineralized zone in human sacral facet joints: Application to improved diagnosis of osteoarthritis	Clin Anat. 2015 May;28(4):538-44, Epub 2015 Feb 26
Pokorny, S., Heinig, A., Hettich, H., Bähr, T., Marczynski-Bühlow, M., Morlock, M.M., Sattler, B., Schöttler, J., Lutter, G.	Transapical mitral valved stent implantation: computed tomographic evaluation of different prototype designs	EuroIntervention. 2014 Aug 30. pii: 20131008-03. doi: 10.4244/EIJY14M08_14. [Epub ahead of print]
Bishop, N.E., Höhn, J.C., Rothstock, S., Damm, N.B., Morlock, M.M.	The influence of bone damage on press-fit mechanics	J Biomech. 2014 Jan 20;. [Epub ahead of print] PMID: 24503049 [PubMed - as supplied by publisher]
Winkler, T., Dai, X.Y., Mielke, G., Vogt, S., Buechner, H., Schantz, J.T., Harder, Y., Machens, H.G., Morlock, M.M., Schilling, A.F.	Three-dimensional quantification of calcium salt-composite resorption (CSC) in vitro by micro-computed tomography (micro-CT)	JOM, Vol. 66, No. 4, pp 559-565, 2014
Hamann, C., Picke, A.K., Campbell, G.M., Balyura, M., Rauner, M., Bernhardt, R., Huber, G., Morlock, M.M., Günther, K.P., Bornstein, S.R., Glüer, C.-C., Ludwig, B., Hofbauer, L.C.	Effects of Parathyroid Hormone on Bone Mass, Bone Strength, and Bone Regeneration in Male Rats with Type 2 Diabetes Mellitus	Endocrinology, 2014 Apr;155(4):1197-206
Weiss, C., Morlock, M.M., Hoffmann, N.P.	Friction induced dynamics of ball joints: instability and post bifurcation behavior	European Journal of Mechanics A/Solids 45 (2014) 161-173
Nüchtern, J., V., Ruecker, A.H., Sellenschloh, K., Rupprecht, M., Pueschel, K., Rueger, J.M., Morlock, M.M., Lehmann, W.	Malpositioning of the lag-screws by one- or two-screw nailing systems for pertrochanteric femoral fractures: a biomechanical comparison of Gamma3 and Intertan	J Orthop Trauma, 2014 Mar 3 [Epub ahead of print]

2013

Glüer, C.C., , Krause, M., Museyko, O., Wulff, B., , Campbell, G., , Damm, T., Daugschies, M., Huber, G., Lu, Y., Peña, J., Waldhausen, S., Bastgen, J., Rohde, K., Breer, S., Steinebach, I., Thomsen, F., Amling, M., Barkmann, R., Engelke, K., Morlock, M., Pfeilschifter, J., Püschel, K.	Neue Horizonte für die In-vivo-Bestimmung wesentlicher Aspekte der Knochenqualität ; Mikrostruktur und Materialeigenschaften, bestimmt mit Quantitativer Computertomografie und Quantitativen Ultraschallmethoden, entwickelt durch das BioAsset Konsortium	Osteologie 2013; Vol.22:223-233
Nagel, K., Klein, A., Püschel, K., Morlock, M., Huber, G.	Dependence of spinal segment mechanics on load direction, age and gender	Research Project F2059, Federal Institute for Occupational Safety and Health, Dortmund/Berlin/Dresden, 2013
Fensky, F., Kueny, R.A., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W., Huber, G., Hansen-Algenstaedt, N.	Biomechanical advantage of C1 pedicle screws over C1 lateral mass screws: a cadaveric study	Eur Spine J. 2013 Dec 31. [Epub ahead of print] PMID: 24378628 [PubMed - as supplied by publisher]
Pokorny, S., Dai, H., Bähr, T., Huenges, K., Marczynski-Bühlow, M., Morlock, M.M., Cremer, J., Lutter, G.	Transapical mitral valved stent implantation: comparison between circular and D-shaped design	EuroIntervention. 2013 Nov 25;. [Epub ahead of print] PMID: 24273248 [PubMed - as supplied by publisher]
Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.P., Morlock, M.M., Huber, G.	The effect of nucleotomy on facet joint loading - a porcine in vitro study	Clin Biomech (Bristol, Avon). 2013 Oct; 28(8):853-9, 2013
Ivicsics, M.F., Bishop, N.E., Sellenschloh, K., Berteau, J.P., Morlock, M,M,, Huber, G.	The effect of nucleotomy on facet joint loading in the porcine lumbar spine	Comput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:222-3
Höfemann, M., Berteau, J.P., Lu, Y.T., Morlock, M.M., Huber, G.	Necessary precision levels for the subchondral mineralised zone thickness of the facet joint to optimise finite-element model	Comput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:224-5
Berteau, J.P., Nover, L., Mielke, G., Ivicsics, M., Morlock, M.M., Huber, G.	In vitro characterisation of the biomechanical properties of the subchondral mineralised zone of lumbosacral facet joints	Comput Methods Biomech Biomed Engin. 2013 Jul;16 Suppl 1:226-7
Stemmer, P., Pourzal, R., Liao, Y., Marks, L., Morlock, M., Jacobs, J., Wimmer, M., Fischer, A.	Microstructure of Retrievals Made from Standard Cast HC-CoCrMo Alloys	ASTM Metal-On-Metal Total Hip Replacement Devices, p 1-17, 2013
Lu, Y., Rosenau, E., Paetzold, H., Klein, A., Püschel, K., Morlock, M., Huber, G.	Strain changes on the cortical shell of vertebral bodies due to spine ageing: A parametric study using a finite element model evaluated by strain measurements	Proc Inst Mech Eng H. 2013 Aug 29;. [Epub ahead of print]Proc Inst Mech Eng H. 2013 Aug 29;. [Epub ahead of print]
Fan, N., Morlock, M.M., Bishop, N.E., Huber, G., Hoffmann, N., Ciavarella, M., Chen, G.X., Hothan, A., Witt, F.	The influence of stem design on critical squeaking friction with ceramic bearings	J Orthop Res. 2013 Jun 27;. [Epub ahead of print] PMID: 23813771 [PubMed - as supplied by publisher]
Hothan, A., Lewerenz, K., Weiss, C., Hoffmann, N., Morlock, M., Huber, G.	Vibration transfer in the ball-stem contact interface of artificial hips	Med Eng Phys. 2013 May 23;. [Epub ahead of print]
Kolb, J.P., Kueny, R.A., Püschel, K., Boger, A., Rueger, J.M., Morlock, M.M., Huber, G., Lehmann, W.	Does the cement stiffness affect fatigue fracture strength of vertebrae after cement augmentation in osteoporotic patients?	Eur Spine J. 2013 May 16;. [Epub ahead of print]
Friesecke, Ch., Morlock, M.	Myokaditis durch Metallose	Hamburger Ärzteblatt 4, S. 28.-30, 2013
Nüchtern, J.V., Sellenschloh, K., Bishop, N., Jauch, S., Briem, D., Hoffmann, M., Lehmann, W., Pueschel, K., Morlock, M.M., Rueger, J.M., Großterlinden , L.G.	Biomechanical Evaluation of 3 Stabilization Methods on Acromioclavicular Joint Dislocations	Am J Sports Med. 2013 Apr 25; [Epub ahead of print]
Hannemann, F., Hartmann, A., Schmitt, J., Lützner, J., Seidler, A., Campbell, P., Delaunay, C.P., Drexler, H., Ettema, H.B., García-Cimbrelo, E., Huberti, H., Knahr, K., Kunze, J., Langton, D.J., Lauer, W., Learmonth, I., Lohmann, C.H., Morlock, M., Wimmer, M.A., Zagra, L., Günther, K.P.	European multidisciplinary consensus statement on the use and monitoring of metal-on-metal bearings for total hip replacement and hip resurfacing	Orthop Traumatol Surg Res. 2013 Mar 15. doi:pii: S1877-0568(13)00027-3. 10.1016/j.otsr.2013.01.005. [Epub ahead of print]
Rothstock, S., Saadatmand, M., Vollmer, M., Paech, A., Jürgens, C., Nassutt, R., Morlock, M.M.	Influence of Cooling on Curing Temperature Distribution During Cementing of Modular Cobalt-Chromium and Monoblock Polyethylene Acetabular Cups	Surgical Invovation, 2013
Jauch, S.Y., Huber, G., Sellenschloh, K., Haschke, H., Baxmann, M., Grupp, T.M., Morlock, M.M.	Micromotions at the Taper Interface Between Stem and Neck Adapter of a Bimodular Hip Prosthesis During Activities of Daily Living	JoR, DOI: 10.1002/jor.22354, 2013
Fensky, F., Nüchtern, J.V., Kolb, J.P., Huber, S., Rupprecht, M., Jauch, S., Sellenschloh, K., Püschel, K., Morlock, M.M., Rueger, J.M., Lehmann, W.	Cement augmentation of the Proximal Femoral Nail Antirotation for the treatment of osteoporotic pertrochanteric fractures - a biomechanical cadaver study	Injury, 2013 Jun;44(6):802-7, 2013
Günther, K,P,, Schmitt, J., Campbell, P., Delaunay, C.P., Drexler, H., Ettema, H.B., GarcÃa-Cimbrelo, E., Hannemann, F., Hartmann, A., Huberti, H., Knahr, K., Kunze, J., Langton, D.J., Lauer, W., Learmonth, I., Lohmann, C.H., Lätzner, J., Morlock, M., Seidler, A., Wimmer, M.A., Zagra, L.	Consensus statement "Current evidence on the management of metal-on-metal bearings"	Hip Int. 2013 Feb 21;23(1):2-5
Hoenig, E., Leicht, U., Winkler, T., Mielke, G., Beck, K., Peters, F., Schilling, A.F., Morlock, M.M.	Mechanical Properties of Native and Tissue-Engineered Cartilage depend on Carrier Permeability: A Bioreactor Study	Tissue Eng Part A. 2013 Feb 7;. [Epub ahead of print]
Skrzypiec, D.M., Bishop, N.E., Klein, A., Püschel, K., Morlock, M.M., Huber, G.	Estimation of shear load sharing in moderately degenerated human lumbar spine	J Biomech. 2013 Jan 9;. [Epub ahead of print]
Bishop, N., Witt, F., Pourzal, R., Fischer, A., Rütschi, M., Michael, M., Morlock, M.	Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings	J Orthop Res. 2013 Jul;31(7):1116-22, Epub 2013 Feb 25

2012

Bishop, N.E., Hothan, A., Morlock, M.M.	High friction moments in large hard-on-hard hip replace-ment bearings in conditions of poor lubrication	J Orthop Res. 2013 May;31(5):807-13, Epub 2012 Dec 13
Lehmann, W., Rupprecht, M., Rücker, A., Hoffmann, M., Morlock, M., Püschel, K., Rueger, J.M.	Interprothetische Frakturen am Femur	Trauma Berufskrankh 2012 • 14:190–195, 2012
Rehmer, A., Bishop, N.E., Morlock, M.M.	Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses	Clin Biomech (Bristol, Avon), 2012 Jan;27(1): 77-83, 2012
Paetzold, H., Goepfert, C., Huber, G., Hoenig, E., Pörtner, R., Schilling, A.F., Meenen, N.M., Morlock, M.M.	The development of the collagen fibre network in tissue-engineered cartilage constructs in vivo. Engineered cartilage reorganises fibre network	Eur Cell Mater. 2012 Apr 5;23: 209-21, 2012
Krause, M., Breer, S., Hahn, M., Rüther, W., Morlock, M.M., Amling, M., Zustin, J.	Cementation and interface analysis of early failure cases after hip-resurfacing arthroplasty	Int Orthop. 2012 Jul;36(7): 1333-40, 2012
Lehmann, W., Rupprecht, M., Nuechtern, J., Melzner, D., Sellenschloh, K., Kolb, J., Fensky, F., Hoffmann, M., Püschel, K., Morlock, M., Rueger, J.M.	What is the risk of stress risers for interprosthetic fractures of the femur? A biomechanical analysis	International Orthopaedics, 2012 Dec; 36(12):2441-6, 2012
Gebert de Uhlenbrock, A., Püschel, V., Püschel, K., Morlock, M.M., Bishop, N.E.	Influence of time in-situ and implant type on fixation strength of cemented tibial trays - A post mortem retrieval analysis	Clin Biomech (Bristol, Avon),07/2012;27(9): 929-35, 2012
Skrzypiec, D.M., Klein, A., Bishop, N.E., Stahmer, F., Püschel, K., Seidel, H., Morlock, M.M., Huber, G.	Shear strength of the human lumbar spine	Clin Biomech (Bristol, Avon), 2012 Aug; 27(7): 646-51, 2012
Weiss, C., Hothan, A., Huber, G., Morlock, M.M., Hoffmann, N.P.	Friction-induced whirl vibration: Root cause of squeaking in total hip arthroplasty	J Biomech. 45(2):297-303, 2012
Breer, S., Krause, M., Busse, B., Hahn, M., Rüther, W., Morlock, M.M., Amling, M., Zustin, J.	Analysis of retrieved hip resurfacing arthroplasties reveals the interrelationship between interface hyperosteoidosis and demineralization of viable bone trabeculae	J Orthop Res. 2012 Jul;30(7):1155-61, 2012
Krause M, Breer S, Hahn M, Rüther W, Morlock MM, Amling M, Zustin J.	Cementation and interface analysis of early failure cases after hip-resurfacing arthroplasty	Int Orthop. 2012 Jan 11. [Epub ahead of print]

2011

Jauch, S.Y., Huber, G., Hoenig, E., Baxmann, M., Grupp, T.M., Morlock, M.M.	Influence of material coupling and assembly condition on the magnitude of micromotion at the stem-neck interface of a modular hip endoprosthesis	J Biomech. 44 (2011) 1747-1751, 2011
Morlock, M.M., Bishop, N., Kaddick, C.	Welche Hüftgelenkgleitpaarung für welchen Patienten? Tribologie der Zukunft (“Which hip articulation bearing for which patient? Tribology of the future	Der Orthopäde 2011 Vol40(12):1061-1067, e-pub Nov 16.7, 2011
Morlock, M., Huber, G., Kaddick, Ch., Bishop, N.	Welchen Beitrag kann die Schadensanalyse zur Qualitätssicherung leisten?	Orthopädische Nachrichten 20.2011, DKOU Kongressausgabe 1, S.2, 2011
Hinsch, A., Vettorazzi, E., Morlock, M.M., Rüther, W., Amling, M., Zustin, J.	Sex differences in the morphological failure patterns following hip resurfacing arthroplasty	BMC Med. 2011 Oct 13;9(1):113. [Epub ahead of print]
Das, D., Zhang, Z., Winkler, T., Mour, M., Günter, C.I., Morlock, M.M., Machens, H.G., Schilling, A.F.	Bioresorption and Degradation of Biomaterials	Adv Biochem Eng Biotechnol. 2011 Oct 6; [Epub ahead of print]
Gradl, G., Stedtfeld, H.W., Morlock, M., Sellenschloh, K., Püschel, K., Mittlmeier, T., Gradl, G.	Locking plate fixation of humeral head fractures with a telescoping screw. A comparative biomechanical study versus a standard plate	Injury. 2012 Jun;43(6): 734-8, Epub 2011 Sep 25
Morlock, M., Hothan, A., Weiss, C., Hoffmann, N.	Noises originating from artificial hip replacements: where do they come from and how can they be prevented?	Orthopädie im Profil, Nr. 2, S. 12-14, 2011
Rehmer, A., Bishop, N.E., Morlock, M.M.	Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses	Clin Biomech (Bristol, Avon). 2012 Jan; 27(1):77-83, Epub 2011 Sep 8, 2011
Rupprecht, M., Sellenschloh, K., Grossterlinden, L., Püschel, K., Morlock, M., Amling, M., Rueger, J.M., Lehmann, W.	Biomechanical evaluation for mechanisms of periprosthetic femoral fractures	J Trauma. 2011 Apr;70(4):E62-6, 2011
Riecke, B., Heiland, M., Hothan, A., Morlock, M., Amling, M., Blake, F.A.	Primary implant stability after maxillary sinus augmentation with autogenous mesenchymal stem cells: a biomechanical evaluation in rabbits	Clin Oral Implants Res. 2011 Nov;22(11):1242-6. EpubApr 19, 2011
Rothstock, S., Uhlenbrock, A., Bishop, N., Laird, L., Nassutt, R., Morlock, M.	Influence of interface condition and implant design on bone remodelling and failure risk for the resurfaced femoral head	J Biomech. 44(9):1646-1653, 2011
Morlock, M., Bishop, N.	Zur Biomechanik von Kurzschaftprothesen	Orthopädie im Profil, Nr. 1, S. 10-11, 2011
Hothan, A., Huber, G., Weiss, C., Hoffmann, N., Morlock, M.	The influence of component design, bearing clearance and axial load on the squeaking characteristics of ceramic hip articulations	J Biomech. 44(5):837-41. Epub 2011 Feb 4
Rupprecht, M., Grossterlinden, L., Ruecker, A.H., de Oliveira, A.N., Sellenschloh, K., Nüchtern, J., Püschel, K., Morlock, M., Rueger, J.M., Lehmann, W.	A Comparative Biomechanical Analysis of Fixation Devices for Unstable Femoral Neck Fractures: The Intertan Versus Cannulated Screws or a Dynamic Hip Screw	J Trauma. 2011 Sep;71(3):625-34, 2011
Rupprecht, M., Grossterlinden, L., Sellenschloh, K., Hoffmann, M., Püschel, K., Morlock, M., Rueger, J.M., Lehmann, W.	Internal fixation of femoral neck fractures with posterior comminution: A biomechanical comparison of DHS® and Intertan nail®	Int Orthop. 2011 Feb 1. [Epub ahead of print]
Hoenig, E., Winkler, T., Goepfert, C., Mielke, G., Paetzold, H., Schuettler, D., Machens, H.G., Morlock, M.M., Schilling, A.F.	High amplitude direct compressive strain enhances mechanical properties of scaffold-free tissue-engineered cartilage	Tissue Eng Part A. 2011 Feb 27. [Epub ahead of print]
Schlegel, U.J., Knifka, J., Röllinghoff, M., Koebke, J., Eysel, P., Morlock, M.M.	Influence of Cementing the Pin on Resistance to Fracture in Hip Resurfacing	Clinical Biomechanics 26 (2011) 136–140, 2011
Schlegel, U.J., Siewe, J., Delank, K.S., Eysel, P., Püschel, K., Morlock, M.M., Gebert de Uhlenbrock., A.	Pulsed lavage improves fixation strength of cemented tibial components	Int Orthop.35, 1165-1169, 2011

2010

Mour, M., Das, D., Winkler, T., Hoenig, E., Mielke, G., Morlock, M.M., Schilling A.F..	Advances in porous biomaterials for dental and orthopaedic applications	Materials 2010, 3, 2947-2974.
Huber, G., Skrzypiec, D.M., Klein, A., Püschel, K., Morlock, M.M.	High cycle fatigue behaviour of functional spinal units	Ind Health. 2010;48(5):550-6.
Hothan, A., Huber, G., Weiss, C., Hoffmann, N., Morlock, M.	Deformation characteristics and eigenfrequencies of press-fit acetabular cups	Clin Biomech Bristol Avon. 2011 Jan;26(1):46-51. Epub 2010 Sep 30.
Gebert de Uhlenbrock, A., Wintzer, C., Imig, H., Morlock, M.M.	Fluid transfer as a mechanism leading to endotension	Med Eng Phys. 2010 Oct;32(8):914-20. Epub 2010 Aug 1.
Schlegel, U.J., Knifka, J., Röllinghoff, M., Koebke, J., Eysel, P., Morlock, M.M.	Effects of impaction on cement mantle and trabecular bone in hip resurfacing	Arch Orthop Trauma Surg. (Ausgabe 00004/2011), S.459-464, 2011. Epub 2010 Jul 15.
Schlegel, U.J., Rothstock, S., Siewe, J., Schiwy-Bochat, K.H., Eysel, P., Morlock, M.M.	Does Impaction Matter in Hip Resurfacing? A Cadaveric Study	J Arthroplasty., 2011 Feb;26(2): 296-302. Epub 2010 May 31.
Winkler, T., Hoenig, E., Gildenhaar, R., Berger, G., Fritsch, D., Janssen, R., Morlock, M.M., Schilling, A.F.	Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities	Acta Biomater. 2010 Oct;6(10):4127-35. Epub 2010 May 7.
Winkler, T., Hoenig, E., Huber, G., Janssen, R., Fritsch, D., Gildenhaar, R., Berger, G., Morlock, M.M., Schilling, A.F.	Osteoclastic bioresorption of biomaterials: Two- and three-dimensional imaging and quantification	Int J Artif Organs. 2010 Apr;33(4):198-203.
Rothstock, S., Uhlenbrock, A., Bishop, N., Morlock, M.	Primary stability of uncemented femoral resurfacing implants for varying interface parameters and material formulations during walking and stair climbing	J Biomech. 2010 Feb 10;43(3):521-6, 2010.
Weiss, C., Gdaniec, P., Hoffmann, N.P., Hothan, A., Huber, G., Morlock, M.M.	Squeak in hip endoprosthesis systems: An experimental study and a numerical technique to analyze design variants	Medical Engineering & Physics 32 (6): 604-609 JUL 2010.
Zustin, J., Hahn, M., Morlock, M.M., Rüther, W., Amling, M., Sauter, G.	Femoral component loosening after hip resurfacing arthroplasty	Skeletal Radiology 39 (8): 747-756 Aug 2010.
Bergmann, G., Graichen, F., Rohlmann, A., Bender, A., Heinlein, B., Duda, G.N., Heller, M.O., Morlock, M.M.	Realistic loads for testing hip implants	Bio-medical Materials and Engineering 20 (2): 65-75 2010.
Zustin, J., Sauter, G., Morlock, M.M., Rüther, W., Amling, M.	Association of Osteonecrosis and Failure of Hip Resurfacing Arthroplasty	Clin Orthop Relat Res. (2010) 468: 756-761, 2010.
Lehmann, W., Rupprecht, M., Hellmers, N., Sellenschloh, K., Briem, D., Püschel, K., Amling, M., Morlock, M., Rueger, J.M	Biomechanical evaluation of peri- and interprosthetic fractures of the femur<u1:p></u1:p>	The Journal of Trauma, Injury, Infection and Critical Care 2010 Jun;68(6):1459-63.

2009

Weiss, C., Hothan, A., Morlock M., Hoffmann, N.	Friction-Induced Vibration of Artificial Hip Joints	GAMM-Mitt. 32, No. 2, 193 – 204 (2009), 2009.
Lange,T., Schilling, A.F., Peters, F., Haag, F., Morlock, M.M., Rueger, J.M., Amling, M.	Proinflammatory and osteoclastogenic effects of beta-tricalciumphosphate and hydroxyapatite particles on human mononuclear cells in vitro	Biomaterials. 2009 Jul 2. [Epub ahead of print]
Röhl, K., Ullrich, B., Huber, G., Morlock, M.M.	Biomechanical analysis of expansion screws and cortical screws used for ventral plate fixation on the cervical spine	Eur Spine J. 2009 Jul 9. [Epub ahead of print]
Learmonth, I.D., Morlock, M.M.	Towards understanding polyethylene wear; a clinical view	Tribologyin Orthopaedics Newsletter, No. 7, March, p.16-17., 2009
Huber, G., Weik, T., Morlock, M	Schädigung eines Hüftendoprothesenschaftes durch Einsatz eines Hochfrequenzmessers	Orthopäde 2009 [Epub ahead of print].
Graeff, C., Chevalier, Y., Charlebois, M., Varga, P., Pahr, D., Nickelsen, T.N., Morlock, M.M., Glüer, C.C., Zysset P.K.	Improvements in vertebral body strength under teriparatide treatment assessed in vivo by finite element analysis: results from the EUROFORS study	J Bone Miner Res., Vol 24, Issue 10, p1672-1680, 2009
Bergmann, G., Graichen, F., Rohlmann, A., Bender, A., Heinlein, B., Duda, G.N., Heller, M.O., Morlock, M.M.	Realistic loads for testing hip implants	Bio-Medical Materials and Engineering 2009 (in press).
Pörtner, R., Goepfert, C., Wiegandt, K., Janssen, R., Ilinich, E., Paetzold, H., Eisenbarth, E., Morlock, M.	Technical Strategies to Improve Tissue Engineering of Cartilage-Carrier-Constructs	Adv Biochem Eng Biotechnol. 2009;112:145-81.
Pourzal, R., Theissmann, R., Morlock, M., Fischer, A.	Micro-structural alterations within different areas of articulating surfaces of a metal-on-metal hip resurfacing system	17th International Conference on Wear of Materials (WOM), Las Vegas, 2009.
Gebert, A., Peters, J., Bishop, N.E., Westphal, F., Morlock, M.M.	Influence of press-fit parameters on the primary stability of uncemented femoral resurfacing implants	Medical Engineering & Physics, 31(1):160-4, 2009.
Bishop, N.E., Schoenwald, M., Schultz, P., Pueschel, K., Morlock M.M.	The condition of the cement mantle in femoral hip prosthesis implantations - a post mortem retrieval study	Hip International, 19(2):87-95, 2009.

2008

Renkawitz, T., Santori, F.S., Grifka, J., Valverde, C., Morlock, M.M., Learmonth, I.D.	A new short uncemented, proximally fixed anatomic femoral implant with a prominent lateral flare: design rationals and study design of an international clinical trial	BMC Musculoskeletal Disorders 2008, 9:147, 2008.
Morlock, M.M., Bishop, N., Zustin, J., Hahn, M., Rüther, W., Amling, M.	Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens	="" style="vertical-align: top;" class="align_left"> JBJS-Am. 2008;90 Suppl 3:89-95, 2008.
Windolf, M., Götzen, N., Morlock, M.	Systematic accuracy and precision analysis of video motion capturing systems - exemplified on the Vicon-460 system	="" rowspan="1" style="vertical-align: top;" class="align_left"> Journal of Biomechanics, 2008 Jul 29. [Epub ahead of print]
Morlock, M.M., Bishop, N., Stahmer, F., Zustin, J., Sauter, G., Hahn, M., Krause, M., Rüther, W., und Amling, M.	Versagensgründe von Oberflächenersatzimplantaten der Hüfte - Eine Analyse von 250 Revisionspräparaten	="" rowspan="1" style="vertical-align: top;" class="align_left"> DerOrthopäde 2008 (E-pub ahead of print).
Bergmann, G., Graichen, F., Rohlmann, A., Heinlein, B., Duda, G., Heller, M., Morlock, M.	Realistic loads for testing hip implants	="" rowspan="1" style="vertical-align: top;" class="align_left"> J. Biomech. Engineering (submitted).
Morlock, MM.	Editorial	="" rowspan="1" style="vertical-align: top;" class="align_left">ClinBiomech (Bristol, Avon). 2008 Apr 4.
Simon, L.C., Schultz, A.P., Morlock, M., Jürgens, C.	"Basketball Foot"-Prognose nach medialer subtalar Luxation	="" rowspan="1" style="vertical-align: top;" class="align_left"> Sportverletzung - Sportschaden, Vol 22:p. 31-37, 2008.
Seidel, H., Pöpplau, B., Morlock, M., Püschel, K., Huber, G.	The size of lumbar vertebral endplate areas - Prediction by anthropometric characteristics and significance for fatigue failure due to whole-body vibration	="" rowspan="1" style="vertical-align: top;" class="align_left"> International Journal of Industrial Ergonomics, p. 1-12, 2008
Eisenbarth, E., Paetzold, H., Morlock, M.	Veränderung der biochemischen und biomechanischen Eigenschaften von Knorpel durch unconfined compression Tests in phosphatgepufferter Salzlösung (Alteration of biochemical and biomechanical cartilage properties by means of unconfined compression tests in phosphate buffered saline solution)	="" rowspan="1" style="vertical-align: top;" class="align_left"> Biomedical Engineering (accepted).
Gebauer, M., Goetzen, N., Barvencik, F., Rupprecht, M., Rueger, J., Püschel, K., Morlock, M. and Amling, M.	Biomechanical analysis of atlas fractures. A study on 40 human atlas specimens	="" rowspan="1" style="vertical-align: top;" class="align_left"> Spine. 2008 Apr 1;33(7):p. 766-70.
Bishop, N., Waldow, F., Morlock, M.M.	Friction moments of large metal-on-metal hip joint bearings and other modern designs	="" rowspan="1" style="vertical-align: top;" class="align_left"> Med Eng Phys. 2008 Feb 19;. [Epub ahead of print]

2007

Morlock, M., Bishop, N.	Tribologie unterschiedlicher Gleitpaarungen: Ein wesentlicher Aspekt in der Revisionsendoprothetik (Tribology in Revision Arthroplasty)	in: Revisionsendoprothetik der Hüftpfanne Hsg. Wirtz, Rader, Reichel, Springer Verlag, S. 201-229, 2007.
Grant, J.A., Bishop, N., Götzen, N., Sprecher, C., Honl, M., Morlock, M.	Artificial composite bone as a model of human trabecular bone: The implant-bone interface	="" style="vertical-align: top;" class="align_left"> Journal of Biomechanics, Vol. 40 (5), p. 1158-1164, 2007.
Rikli, D., Honigmann, P., Babst, R., Cristalli, A., Morlock, M., Mittlmeier, T.	Intra-articular pressure measurement in the radioulnocarpal joint using a novel sensor: in vitro and in vivo results	="" rowspan="1" style="vertical-align: top;" class="align_left"> J Hand Surg [Am]. Vol.32(1):p.67-75, 2007.
Huber, G., Morlock, M., Ito,	Consistent hydration of intervertebral discs during in vitro testing	="" rowspan="1" style="vertical-align: top;" class="align_left"> Medical Engineering & Physics, Vol. 29, Issue 7, p. 808-813, 2007

2006

Morlock, M., Rüther, W., Hahn, M., Delling, G.	Wunsch und Wirklichkeit - Tribologie und Implantationstechnik des Oberflächenersatzes	Orthopädie im Profil, Vol. 2, Nr. 1, S. 16-17, 2006.
Honl, M., Schwieger, K., Salineros, M., Jacobs, J., Morlock, M., Wimmer, M.	Orientation of the acetabular component: a comparison of five navigation systems with conventional surgical technique	="" style="width: 35%; vertical-align: top;" class="align_left"> JBJS-Br, Vol. 88 Nr. 10, p. 1401-1405, 2006.
Hornez NC., Chai F., Eisenbarth E., Traisnel M., Breme J., Hildebrand H.	Cytocompatibility and biocorrosion of implant alloys in different cell culture systems	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Biomaterialien 7 (2), 2006, 82-89
Eisenbarth E., Velten D., Müller M., Thull R., Breme J.	Nanostructured niobium oxide coatings influence osteoblast adhesion	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J Biomed Mater Res A. 2006 Oct; 79(1): 166-75.
Eisenbarth E., Velten D., Breme J.	Biomimetic Implant Coatings	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Biomolecular Engineering 24 (2007) 27-32
Morlock, M.	Gleitpaarung heute und morgen	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> MedReport, Nr. 19, Vol. 30, S. 5, 2006.
Morlock, M.	Die Biomechanik des Fußes	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Wintertagung der österreichischen gesellschaft für Fußchirurgie, Wien, Jatros Orthopädie, Vol. 11, Nr. 1, p. 12-14, 2006.
Westphal, F., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M.	Migration and cyclic motion of a new short-stemmed hip prothesis – a biomechanical in-vitro study	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Clin Biomech 21(8):834-40, 2006.
Westphal, F., Bishop, N., Püschel, K., Morlock, M.	Biomechanics of a new short-stemmed uncemented hip prothesis: an in-vitro study in human bone	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Hip International, Vol. 16 S-3, p. 22-29, 2006.
Klestil, T., Morlock, M., Schwieger, K., Sellenschloh, K., Curda, B., Biedermann, R., Hennerbichler, A., Schmoelz, W., Rabl, W., Blauth, M.	Migration of two different cementless hip arthoplasty stems in combination with two different heads: a biomechanical in vitro study	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Arch Orthop Trauma Surg. 126 (6): 387-93, 2006.
Siebel, T., Maubach, S., Morlock, M.	Lessons learned from early clinical experience and results of 300 ASR^® hip resurfacing implantations	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 345-353, 2006.
Morlock, M., Bishop, N., Rüther, W., Delling, G., Hahn, M.	Biomechanical, morphological and histological analysis of early failures in hip resurfacing arthroplasty	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 333-344, 2006.
Yew, A., Jin, Z., Donn, A., Morlock, M., Isaac, G.	Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 311-319, 2006.
Jin, Z., Meakins, S., Morlock, M., Parsons, P., Hardaker, C., Flett, M., Isaac, G.	Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 299-309, 2006.

2005

Morlock, M., Spears, I., Pfleiderer, M., Schneider, E.	Micromotion at the bone-implant interface	Proceedings of the 1^st GAMM Seminar on Continuum Biomechanics. Editors. W. Ehlers B. Markert. Report No. II-14, Glückauf Verlag, Essen, p.99-108, 2005.
Morlock, M.	Editorial	Clinical Biomechanics 20(9):S1, 2005.
Morlock, M., Bishop, N.	The bigger the better – Tribologie aus der Sicht des Großkopfes	Orthopaedic Dimensions 2 / 2005, p. 16-18, 2005.
Honl, M., Schwieger, K., Gauck, Ch., Lampe, F., Morlock, M.M., Wimmer, M., Hille, E.	Pfannenposition und Orientierung im Vergleich – Navigation vs. konventionelle Handimplantation von Hüftendoprothesen	Orthopäde 34(11):p. 1131-6, 2005.
Huber, G., Paetzold, H., Püschel, K., Morlock, M.	Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung	Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1062, Wirtschaftsverlag, Dresden, 2005.
Nagel-Heyer S., Goepfert C., Morlock M. and Pörtner, R.	Relationship between physical, biochemical and biomechanical properties of tissue-engineered cartilage-carrier-constructs	Biotechnology Letters (27):187-192, 2005.
Hoffmann B., Kokott A., Schafranska o., Detsch R., Winter S., Eisenbarth E., Peters K., Breme J., Kirkpatrick CJ., Ziegler G.	TiO₂-Beschichtung auf Implantatlegierungen im Korrosions-, Auslaug- und Biokompatibilitätstest	Biomedizinische Technik Oktober 2005, Band 50, Heft 10, 320-329
Peters K., Unger R., Eisenbarth E., Hoffmann B., Detsch R., Schäfer J., Stumpf S., Breme J., Ziegler G., Kirkpatrick C.	The Intercellular Contact as an Indicator for Compatibility of Biomaterials in Endothelial Cells	="" style="vertical-align: top;"> Biomaterialien 6(1), 2005: 7-13
Velten D., Eisenbarth E., Schanne N., Breme J.	Biomedical Oxide Coatings on Ti-alloys prepared by means of the Sol-Gel Process	="" rowspan="1" style="vertical-align: top;"> Biomaterialien (6)1, 2005: 22-28
Seebeck J., Goldhahn J., Morlock M., Schneider E.	Mechanical behaviour of screws in normal and osteoporotic bone	="" rowspan="1" style="vertical-align: top;"> Osteoporosis International 16 Suppl 2: p.107-11 2005.
Götzen, N., Nassutt, R., Lampe, F., Morlock, M.	Load-shift – numerical evaluation of a new design philosophy for uncemented hip prostheses	="" rowspan="1" style="vertical-align: top;"> Journal of Biomechanics 38(3):595-604, 2005.

2004

Morlock, M.	Biomechanik	In: Lendenwirbelsäule Ursachen, Diagnostik und Therapie von Rückenschmerzen. Hrsg.: Hildebrandt, Jan; Müller, Gerd; Pfingsten, Michael. Urban & Fischer. S.150-164, 2004, ISBN 3-437-23250-9.
Eisenbarth E., Velten D., Müller M., Breme J.	Biocompatibility of ß-stabilizing elements of titanium alloys	Biomaterials. 2004 Nov; 25 (26):5705-13
Tinschert J., Götzen N., Natt, G., Morlock M.M., Spiekermann H.	Vollkeramische Brücken aus Oxidkeramik – Ist die Lebensdauer vorhersagbar?	Biomaterialien 5, 50-51, 2004.
Honl M., Schwieger K., Dries S., Gauck Ch., Lampe F., Morlock M., Wimmer M.	COMPARISON OF THR-CUP-ORIENTATION USING DIFFERENT NAVIGATION SYSTEMS	CAOS International Meeting 2004.
Seebeck J., Goldhahn J., Städele H., Messmer P., Morlock M.M., Schneider, E.	Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws	J Orthop Res. 2004 Nov;22(6):1237-42, 2004.
Niehoff, A., Kersting, U., Zaucke, F., Morlock, M., Brüggemann, G.-P.	Adaptation of mechanical, morphological, and biochemical properties of the rat growth plate to dose-dependent voluntary exercise	="" style="vertical-align: top;" class="align_left"> Bone 35(4):899-908, 2004.
Schwieger, K., Rentzsch, R., Carrero, V., Becker, A., Bishop, N., Hille, E., Louis, H., Morlock, M., Honl, M.	The abrasive water jet cutting as a new procedure for cutting cancellous bone – in vitro testing in comparison with the oscillating saw	="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomedical Materials Research, Nov 15, 71B(2):223-8, 2004.

2003

Wintzer, Ch., Birken, L., Kleinschmidt, D., Riepe, G., Morlock, M., Müller, J., Debus, E., Imig, H.	Systemdruck bei Typ III Endoleak – Untersuchungen im Kreislaufsimulator	Gefässchirurgie 8: 206-211, 2003.
Morlock, M., Lampe, F., Honl, M.	Biomechanik des Gelenkersatzes	Medizintechnik-Report Hamburg, TUHH-Technologie GmbH, S. 7-10, 2003.
Wening, J.V., Stegemann, J., Lechert, B., Morlock, M.M., Püschel, K.	Zertifiziertes Materialversagen	Mitteilungen der DGU Vol 25 Nr. 48 Oktober, S. 43-44, 2003.
Lampe, F., Nassutt, R., Götzen, N., Honl, M., Dries, S., Kokenge, T., Morlock, M. und Hille, E.	Die Load Shift-Hüftendoprothese – numerische und klinische Evaluation eines neuenKonzepts der adaptiven Stielverankerung [Load shift-total hip replacement - numerical and clinical evaluation of a new concept of adaptive stem fixation]	Z Orthop Ihre Grenzgeb 141(6):657-64, 2003, Zeitschrift für Orthopädie.
Honl, M., Carrero, V., Schwieger, K., Rentzsch, R., Dierk, O., Drie, S., Pude, F., Bluhm, A., Hille, E., Louis, H., und Morlock, M.	The pulsed water jet for selective removal of bone cement during revision arthroplasty	Biomed Tech 48(10):275-80, 2003.
Honl, M., Schwieger, K., Carrero, V., Rentzsch, R., Dries, S., Pude, F., Bluhm, A., Hille, E., Louis, H., Morlock, M.,	Der gepulste Wasserstrahl zur selektiven Knochenzemententfernung in der Revisionsendoprothetik	Biomed Tech. 48, S. 275-280, 2003.
Honl, M., Rentzsch, R., Schwieger, K., Carrero, V., Dierk, O., Dries, S., Louis, H., Pude, F., Bishop, N., Hille, E., Morlock, M.	The water jet as a new tool for endoprosthesis revision surgery - an in vitro study on human bone and bone cement	Biomed Mater <st1:place w:st="on"><st1:country-region w:st="on">Eng.</st1:country-region></st1:place> 2003; 13(4): 317-25.
Wagner, J.F., Lippens, V., Nagel, V., Morlock, M., Vollmer, M.	An Instrument Quantifying Human Balance Skills: Attitude Reference System for an Ankle Exercise Board	International Journal of Computer Science in Sport, SE1, 96-110, 2003.
Honl, M., Uebeyli, H., Dierk, O., Schwieger, K., Rentzsch, R., Carrero, V., Dries, S., Betthäuser, A., Höpker, W., Hille, E., Morlock, M.	Der Druckwasserstrahl zum selektiven Abtrag der Synovialis– In-vitro-Studie zur Machbarkeit eines neuen Synovektomieverfahrens	Z Orthop; 141:322-327, 2003.
Huber, G., Linke, B., Morlock, M. M., and Ito, K.	The Influence of In Vitro Testing Method on Measured Intervertebral Disc Characteristics	Spinal Implants: Are We Evaluating Them Appropriately, ASTM STP 1431, M. N. Melkerson, S. L. Griffith, and J. S. Kirkpatrick, Eds., ASTM International, <st1:place w:st="on">West Conshohocken</st1:place>, PA, 2003.
Honl, M., Dierk, O., Gauck, C., Carrero, V., Lampe, F., Quante, M., Schwieger, C., Hille, E., Morlock, M.	Comparison of robotic-assisted and manual implantation of a primary total hip replacement – a prospective study	="" style="vertical-align: top;" class="align_left"> J Bone Joint Surg Am 85: 1470-1478, 2003.
v. Knoch, M., Bluhm, A., Morlock, M., von Foerster, G.	Absence of surface roughness changes after insertionof one type of matte cemented femoral component during 2 to 15 years	="" rowspan="1" style="vertical-align: top;" class="align_left"> J Arthroplasty;18(4):471-477, 2003.
Honl, M., Morlock, M., Mallwitz, J., Hille, E. and Delling, G.	Pelvic girdle reconstruction by spinal fusion in combination with ischial screw fixation in a case of Aneurysmal Bone Cyst	="" rowspan="1" style="vertical-align: top;" class="align_left"> Sarcoma, p.1-6, 2003.

2002

Neumann, H.G., Baumann, A., Wanke, G., Hamelynck, K.J., Morlock, M.	Ceramized articulating surfaces of metal-metal hip joint prosthesis	BIOCERAMICS 14 KEY ENGINEERING MATERIALS 218-2: 601-604, 2002
E. Reichle, M. Morlock, K. Sellenschloh, C. Eggers	Zur Definition der Pedikelfehllage Primärstabilität und Lockerungsverhalten von Pedikelschrauben in Abhängigkeit von ihrer Lage: spongiöse Verankerung, kortikale Verankerung, Perforation und Fehllage	Orthopäde 31 (4), 402-405, 2002
E. Reichle, K. Sellenschloh, M. Morlock, C. Eggers	Einbringung von Pedikelschrauben unter Einsatz unterschiedlicher Unterstützungsverfahren Ein Laborversuch an 12 Wirbelsäulenpräparaten	Orthopäde 31 (4), 368-371, 2002
Riepe, G., Heintz, C., Kaiser, E., Chakfe, Morlock M, Delling M, Imig,	What can we learn from explanted endovascular devices?	="" style="vertical-align: top;" class="align_left"> Orthopäde 31 (4), 368-371, 2002.
Morlock, M., Strandborg, J., Sellenschloh, K., Nassutt, R., Püschel, K., Eggers, Ch.	Vergleich unterschiedlicher Wirbelkörperersatzsysteme hinsichtlich Migration und Primärstabilität bei dorso-ventraler Spondylodese nach Korporektomie mit und ohne Laminektomie	="" rowspan="1" style="vertical-align: top;" class="align_left"> European Journal of Vascular and Endovascular Surgery, Vol. 24, pp. 117-122, 2002.
Honl, M., Carrero, V., Hille, E., Schneider, E., Morlock, M.	Bone-Patellar-Tendon-Bone Grafts for ACL Reconstruction – An in-vitro investigation of the mechanical Beviour under Static ans Dynamic Loading Conditions	="" rowspan="1" style="vertical-align: top;" class="align_left">Orthopäde 31 (5):514-521, 2002
Riepe, G., Meincke, J., Nassutt, R., Morlock, M., Gross-Fengels, W., Imig, H.	Schädigung von Polyestergefäßprothesen durch Gefäßklemmen	="" rowspan="1" style="vertical-align: top;" class="align_left"> American Journal of Sports Medicine Jul-Aug 30(4): pp. 549-557, 2002.
Hahn, M., Nassutt, R., Delling, G., Mahrenholtz, O., Schneider, E., Morlock, M.	The Influence of Material and Design Features on the Mechanical Properties of Transpedicular Spinal Fixation Implants	="" rowspan="1" style="vertical-align: top;" class="align_left"> Zentralblatt für Chirurgie (Zentralbl Chir.) Mar; 127(2):89-94, 2002.

2001

Riepe G, Chakfe N, Meincke J, Nassutt R, Seemann D, Klinggraff G, Morlock M, Imig H.	Late complications after alloplastic vascular replacement	Kongressbd Dtsch Ges Chir Kongr. ;118:p.475-7, 2001.
Wimmer, M., Artelt, D., Kunze, J., Morlock, M., Schneider, E., Nassutt, R.	Friction and wear properties of metal/metal hip joints – application of a novel testing and analysis method	Zeitschr. Matwiss. 32: p. 891-896, 2001.
Morlock, M., Nassutt, R., Vollmer, M., Groß, E., Huber, G.	Schlagkräfte beim Boxen	SENSOR report, Vol. 16, No. 1, S. 20-21, 2001.
Honl, M., Dierk, O., Müller, V., Küster, J., Hille, E., Morlock, M	Die Jet Cutting Diskotomier – ein neues mikroinvaives Verfahren	="" rowspan="1" style="vertical-align: top;" class="align_left"> in: Siegert, R., Jurk, V., Magritz, R. (Hrsdg.) Wasserstrahldissektion in der Medizin, Books on Demand GmbH, S. 79-90, 2001.
Honl, M., Dierk, O., Küster, J.R., Müller, G., Müller, V., Hille, E., Morlock, M.	Die Wasserstrahldiskotomie im mikroinvasiven Zugang – In-vitro Testung und erste klinische Aspekte eines neuen Verfahrens	="" rowspan="1" style="vertical-align: top;" class="align_left"> Zeitschrift für Orthopädie und ihree Grenzgebiete, Vol. 139 Nr. 1, S. 45-51, 2001.
Heintz, C., Riepe, G., Birken, L., Kaiser, E., Chakfé, N., Morlock, M., Delling, G. and Imig, H.	Corroded nitinol wires in explanted aortic endografts: an important mechanism of failure?	="" rowspan="1" style="vertical-align: top;" class="align_left">J Endovasc Ther. 8(3):p. 248-53, 2001.
Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Müller, V., Honl, M.	Duration and Frequency of Every Day Activities in Total Hip Patients	="" style="vertical-align: top;" class="align_left"> Journal of Biomechanics Vol. 34 (7), p. 873-881, 2001.
Morlock, M., Nassutt, R., Janßen, R., Willmann, G., Honl ,M.	Mismatched Wear Couple Zirconium Oxide / Aluminium oxide in Total Hip Replacement: A Case Study	="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Arthroplasty 16 (8), pp.1071-1074, 2001.
Spears, Pfleiderer, M., Schneider, E., Morlock, M., and Hille, E.	The effect of interfacial parameters on cup-bone relative micromotions: A finite element investigation	="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomechanics Vol 34 No. 1, pp. 113-120, 2001.
Morlock, M. und Schneider, E.	Meßsystem zur Belastungsanalyse bei Pflegekräften am Arbeitsplatz und Ergebnisse	="" rowspan="1" style="vertical-align: top;" class="align_left">in: Low Back Pain in the Health care Profession, ISSA Prevention Series No. 1024, Hamburg, S. 76-81, 2001.
Lampe, F., Morlock, M., Pfleiderer,M., Wimmer, M., Nassutt, R. und Schneider,E.	Die Auswirkungen von Belastungen auf die Endoprothesen-Knochenverbindung - Konsequenzen für Design, Verweildauer und Rehabilitation	="" rowspan="1" style="vertical-align: top;" class="align_left"> in: Zschorlich, V. (Hrsg.) “Prävention und Rehabilitation des Haltungs- und Bewegungsapparates”, Schriftenreihe der Deutschen Vereinigung für Sportwissenschaft, Academia Verlag, St. Augustin, Bd. 103, pp. 49-66, 2001.

2000

Honl, M., Rentsch, R., Üebelyi, H., Hille, E., Morlock, M., Louis, H.	Water-jet cutting in medical use - an overview	in: Jetting Technology, BHR Group 2000, p. 183-196, 2000.
Morlock, M., Honl, M.	Biomechanik der Wirbelsäule - Belastung, Einfluss von Degeneration und operativer Verfahren auf das mechanische Verhalten	Materialien zum II. Wirbelsäulenkurs, BG Klinik Bergmannstrost, Halle, S. 15-22, 2000.
Meenen, N., Sarvary, A., Mühlenfeld, K., Sotonyi, P., Morlock, M., Baranyi, G., Rueger, J.	Behandlungsverfahren: Ruptur der Achillessehne - Argumente für die Nahtversorgung	="" style="width: 35%; vertical-align: top;" class="align_left"> Trauma und Berufskrankheit, Vol. 2, Nr. 5, S. 157-159, 2000.
Riepe, G., Chafke, N., Morlock, M., Schröder, A., Imig, H.	Langzeitverhalten von Gefäßprothesen im Menschen - Degeneration des Polyesters durch Hydrolyse	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">In: in: Meenen, N., Katzer, A., Rüger, J., (eds.) Zelluläre Interaktion mit Biomaterialien, Hefte zur Zeitschrift "der Unfallchirurg", Vol. 278, S.175-177, 2000.
Müller, V., Dierk, O., Morlock, M., Hille, E. und Honl, M.	Aneurysma spurium der Arteria poplitea nach vorderer Kreuzbandplastik	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Zeitschrift für Arthroskopie Vol. 13, p. 194-196, 2000.
Spears, Pfleiderer, M., Schneider, E., Hille, E., Bergmann, G., Morlock, M.	Interfacial conditions between a press-fit acetabular cup and bone during daily activities: Implications for achieving bone in-growth	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Journal of Biomechanics Vol 33, No. 11, p. 1471-1477, 2000.
Honl, M., Lampe, F., Gauck, CH., Müller, G., Morlock, M., und Hille, E.	Die robotergestützte Implantation von Hüftendoprothesen - Erfahrungen und Ergebnisse nach 100 Operationen	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">exracta orthopaedica, Heft 1, S. 1-6, 2000.
Honl, M., Rentzsch, R., Lampe, F., Müller, V., Dierk, O., Hille, E., Louis, H., Morlock, M.	Water Jet Cutting zur Bearbeitung von Knochen und Knochenzement - Parameterstudie zu Möglichkeit und Grenzen einer neue Methode	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Medizintechnik Vol. 45, Nr. 9, p. 222-227, 2000.
Riepe, G., Heintz, C., Chafké, N., Morlock, M., Groß-Fengels, W., Imig, H.	Stentdrahtbrüche und Maschenlockerungen explantierter, endovaskulärer Prothesen	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Zentralblatt für Chirurgie 125, S. 22-26, 2000.
Honl, M., Rentsch, R., Müller, G., Brandt, C., Hille, E., Louis, H., Morlock, M.	The use of water-jetting technology in prostheses revision Surgery – First results of parameter studies on bone and bone cement	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J Biomed Mater Res., Vol. 53, No. 6, pp. 781-790, 2000.
Morlock, M., Bonin, V., Mueller G., Deuretzbacher, C. and Schneider E.	Determination of the In-vivo Loading of the Lumbar Spine with a new approach directly at the Workplace – first results for nurses	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Clinical Biomechanics, Vol. 15, No. 8, pp. 549-558, 2000.
Honl, M., Lampe, F., Gauck, CH., Müller, G., Morlock, M., und Hille, E.	Die robotergestützte Implantation von Hüftendoprothesen - Erfahrungen und Ergebnisse nach 100 Operationen	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> extracta orthopaedica, Heft 1, S. 1-6, 2000.

1999 / 1998

Hahn, M., Nassutt, R., Morlock, M., Delling, G., Schneider, E.,	Ein vereinfachtes Verfahren zur mechanischen Prüfung von LWS-Implantaten	Biomedizinische Technik, Vo. 44, Nr.10, S. 283-289, 1999.
Honl, M., Müller, V., Morlock, M., Dierk, O., Betthäuser, A., Müller, G., Hille, E., Schneider, E.	Altersabhängigkeit der Fixationsfestigkeit der ACL-Plastik. Klinische Übertragung einer in-vitro Studie	Deutsche Zeitschrift für Sportmedizin, Vol. 49, Sonderheft 1, S. 233-237, 1998.
Morlock, M. und Nassutt, R.	Ermittlung der Eigenschaften und der Wirkung kohäsiver Stützbandagen	="" style="vertical-align: top;" class="align_left"> Orthopädietechnik, Vol. 50, Nr. 5, S. 400-412,. 1999.
Morlock, M., Schneider, E.	Die Bestimmung der Belastung von Krankenpflegekräften am Arbeitsplatz - Erste Ergebnisse	="" rowspan="1" style="vertical-align: top;" class="align_left"> Sichere Arbeit – Internationales Fachmagazin für Prävention in der Arbeitswelt, Nr. 4, S. 22-27, 1999.
Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider, E.	Intramuscular Pressures in the Erector Spinae and Intraabdominal Pressure Related to Posture and Loading	="" rowspan="1" style="vertical-align: top;" class="align_left"> Spine, Vol. 23, No. 23, p. 2580-2590, 1998.
Nassutt, R., Morlock, M.,	Mechanische Überprüfung der Winkelstabilität von internen Fixateuren und winkelstabilen Plattensystemen	="" rowspan="1" style="vertical-align: top;" class="align_left"> Trauma und Berufskrankheit, Vol. 1, Nr. 4, S. 398-401, 1999.
Placzek, R., Birken, L., Morlock, M., Rüther, W., Schneider, E	Der Einfluss unterschiedlicher Zylinderdurchmesser von Implantaten zur lumbalen Wirbelsäulenfusion auf die Kompressionsfestigkeit im FSU-Modell	="" rowspan="1" style="vertical-align: top;" class="align_left"> Biomedizinische Technik, Band 43, Heft 9, S. 253-256, 1998.
Placzek, R., Kothe, R., Knopf, U., Morlock, M., Rüther, W., Schneider, E.	Mechanische Untersuchung potentieller keramischer Implantatmaterialien zur minimal-invasiven abterioren lumbalen interkorporellen Fusion	="" rowspan="1" style="vertical-align: top;" class="align_left"> Biomedizinische Technik, Band 44, Heft 7-8, S. 206-211, 1999.
Rehbein, P., Nassutt, R., Eggers, Ch. und Morlock, M.,	Mechanische Testungen von Implantaten für die 'Ventrale interkorporelle Spondylodese' für die untere Halswirbelsäule	="" rowspan="1" style="vertical-align: top;" class="align_left"> Trauma und Berufskrankheit, Vol. 1, Nr.4, S. 332-336, 1999.
Riepe, G., Heilberger, P., Umscheid, T., Chafke, N., Raithel, D., Stelter, W., Morlock, M., Kretz, J., Schröder, A. and Imig, H.	The Frame Dislocation of Body Middle Rings in Endovsacular Stent Tube Grafts	="" rowspan="1" style="vertical-align: top;" class="align_left"> European Journal of Vascular and Endovascular Surgery, Vol. 17, pp.28-34, 1999.
Seebeck, J., Morlock, M., und Schneider, E.,	Optimale Implantatverankerung in osteoporotischem Knochen mittels monokortikaler Schrauben	="" rowspan="1" style="vertical-align: top;" class="align_left"> Trauma und Berufskrankheit, Vol. 1, Nr.4, S . 411-414, 1999.
Seide, K., Morlock, M., Schümann, U., Wolter, D.,	Wirkprinzipien der winkelstabilen Plattenschraubenverbindung bei Fixateur interne-Osteosynthesen	="" rowspan="1" style="vertical-align: top;" class="align_left">uma und Berufskrankheit, Vol. 1, Nr.4, S. 320-325, 1999.
Spears, I., Morlock, M., Pfleiderer, M., Schneider, E., and Hille, E.	The influence of friction and interference on the seating of a press-fit cup: A finite element investigation	="" rowspan="1" style="vertical-align: top;" class="align_left">Journal of Biomechanics, Vol. 32, pp. 1183-1189, 1999.
Morlock, M., Bonin, V., Mueller G., Deuretzbacher, C. and Schneider E.	Determination of the In-vivo Loading of the Lumbar Spine with a new approach directly at the Workplace – first results for nurses	="" rowspan="1" style="vertical-align: top;" class="align_left"> Clinical Biomechanics (accepted).
Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Müller, V., Honl, M	Duration and Frequency of Every Day Activities in Total Hip Patients	="" rowspan="1" style="vertical-align: top;" class="align_left"> Journal of Biomechanics (accepted).
Riepe, G., Chakfe, N., Whiteley, M., Nassutt, R., Morlock, M. und Imig. H.	Die Notwendigkeit eines Gefäßchirurgischen Prüflabors	="" rowspan="1" style="vertical-align: top;" class="align_left"> Gefäßchirurgie (accepted).
Riepe, G., Heintz, C., Chafké, N., Morlock, M., Groß-Fengels, W., Imig, H	Stentdrahtbrüche und Maschenlockerungen explantierter, endovasculärer Prothesen	="" rowspan="1" style="vertical-align: top;" class="align_left"> Zentralblatt für Chirurgie (accepted).
Spears, I., Morlock, M., Pfleiderer, M., Schneider, E., and Hille, E	Relative Micromotion at the bone-implant interface during the gait-cycle: A finite element approach	="" rowspan="1" style="vertical-align: top;" class="align_left"> Journal of Biomechanics (accepted)
Honl, M., Morlock, M., Mallwitz, J., Hille, E. and Delling, G	Pelvic girdle reconstruction by spinal fusion in combination with ischial screw fixation in a case of Aneurysmal Bone Cyst	="" rowspan="1" style="vertical-align: top;" class="align_left"> JBJS (submitted).
Honl, M., Rentsch, R., Bluhm, A., Hille, E., Morlock, M., Louis, H.,	Waterjetting Technology in Prosthesis Revision Surgery – Cutting Experiments on Bone and Bone Cement	="" rowspan="1" style="vertical-align: top;" class="align_left"> Applied Biomaterials(submitted).
Honl, M., Rentzsch, R., Lampe, F., Müller, V., Dierk, O., Hille, E., Louis, H., Morlock, M.	Water Jet Cutting zur Bearbeitung von Knochen und Knochenzement - Parameterstudie zu Möglichkeit und Grenzen einer neue Methode	="" rowspan="1" style="vertical-align: top;" class="align_left"> Medizintechnik (submitted).
Meenen, N., Englert, C., Morlock, M	The use of hydoxyapatite-ceramic as bone substitute for subchondral critical size bone defects	="" rowspan="1" style="vertical-align: top;" class="align_left"> Clinical Orthopaedics and Related Research (submitted).
Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider, E.	Intramuscular Pressure Measurements in the Erector Spinae as a Tool to Quantify Dynamic Muscular Activity in-vivo	="" rowspan="1" style="vertical-align: top;" class="align_left"> Spine (submitted).
Müller, V., Dierk, O., Morlock, M., Hille, E. und Honl, M.	Aneurysma spurium der Arteria poplitea nach vorderer Kreuzbandplastik	="" rowspan="1" style="vertical-align: top;" class="align_left"> Zeitschrift für Arthroskopie (submitted).
Spears, I., Pfleiderer, M., Schneider, E., Hille, E., Bergmann, G., Morlock, M.	Interfacial conditions between a press-fit acetabular cup and bone during daily activities: Implications for achieving bone in-growth	="" rowspan="1" style="vertical-align: top;" class="align_left"> Journal of Biomechanics (submitted).
v. Knoch, M., Bluhm, A., Morlock, M., von Förster, G.	Surface roughness changes of non-polished femoral components of artificial hip joints during 2 to 15 years in service	="" rowspan="1" style="vertical-align: top;" class="align_left"> JBJS (B) (submitted).

1997

Brüggemann, G.-P., Morlock, M. and Zatsiorsky, V.M. (1997)	Analysis of the bob and luge events (men) at the XVII Olympic Winter Games in Lillehammer	Journal of Applied Biomechanics, Vol. 13, No. 1, pp. 98-109.
Duda, G., Schneider, E., Chao, E.Y.S. (1997)	Internal forces and moments in the femur during walking	J Biomech 30, No. 9, pp. 933-942.
Matter, H.-P., Morlock, M. und Gruber, G. (1997)	Wie wirkt ein Schockabsorbermaterial in der Einlagenversorgung?	="" style="width: 35%; vertical-align: top;" class="align_left"> Orthopädieschuhtechnik, No. 10, S. 20-25.
Morlock, M., Mittlmeier, Th. (1996)	Modern gait anylsis: a tool to improve shoes, insoles and the understanding of foot function	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Acta OrthopaedicaBegica, Vol. 62, S1, pp. 11-16, 1996.
Morlock, M., Bonin, V. and Schneider, E. (1997)	Trunk muscle fatigue and associated EMG changes during a dynamic iso-inertial test	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Euopean Journal of Applied Physiology, Vol. 76, No. 1, pp. 75-80.
Morlock, M., Brüggemann, H.-P. und Schneider E. (1997)	Muskuläre Stabilisierung und Kreuzschmerz, Österreichische Zeitschrift für Physikalische Medizin und Rehabilitation	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Vol. 7, Supplement 2, S. 16-22.
Müller, G. (1997)	Trainingstherapie im Rahmen der Manuellen Medizin (Training Therapy in Manual Medicine)	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Manuelle Medizin, Vol. 35, Nr. 4, S. 210-219.
Riepe, G., Loos, J., Imig, H., Schröder, A., Schneider, E., Petermann, J., Rogge, A., Ludwig, M., Schenke, A., Nassutt, R., Chafke, N. and Morlock, M. (1997)	Long-term in-vivo alterations of polyester vascular grafts in humans	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> European Journal of Vascular and Endovascular Surgery, Vol. 13, pp. 540-548.
Schneider, E. (1997)	Res biomechanica (hamburgensis)	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Hefte zu "Der Unfallchirurg" Vol. 261, S. 3-5
Seide, K., Wolter, D., Kortmann, H. (1997)	Klinische Ergebnisse der Behandlung von Frakturen und Fehlstellungen mit einem Software - gesteuerten Hexapod - Mechanismus im Ilizarow-Ringfixateur	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Hefte zu "Der Unfallchirurg", Vol. 263, S. 927 – 929.
Spears, I. (1997)	A finite element model of prismatic enamel: A reappraisal of data on Young’s modulus	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Journal of Dental Research, Vol. 76, No.10, pp. 1690-1697.
Wimmer, M.A. and Andriacchi, T.P. (1997)	Tractive forces during rolling motion in the evaluation of wear in total knee replacement	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Journal of Biomechanics, Vol. 30, No. 2, pp. 131-137.
Wolter D. und Seide K. (1997)	Das intelligente Implantat	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Hefte zu "Der Unfallchirurg" Vol. 261, S. 236-240
Kunze, J., Wimmer, M., Koelling, S., Schneider, E.	Determination of titanium and zirconium wear debris in blood serum by means of HNO3/HF pressurised digestion using ICP-optical emission spectrometry	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Fresenius Journal of Analytical Chemestry (accepted).
Lampe, F., Grischke, M., Wimmer, M., Nassutt, R., Klages, C., Hille, E., Schneider, E	Einfluß der Oberflächenhärte der Gelenkkugel auf abraive Verschleißmechanismen in der Paarung mit Polyethylen für künstliche Hüftgelenke	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Biomedizinische Technik (accepted).
Müller, G., Heinold, M., Stiller, T., Schröder, J. und Pietrek, M	Der Hamburger Rumpfmuskeltest. Ein klinischer Test zur quantitativen Erfassung von Maximalkraft und Kraftausdauer der Rumpfmuskulatur.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> (A Clinical Test for Quantification of Trunk Muscle Strength and Endurance). Z. f. Sportmedizin (accepted).
Lampe, F., Betthäuser, A., Hille, E., Heinold, M., Schröder, J.	Limited range of motion quadriceps training adapted to different types of knee joint instabilities	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Knee Surgery Sports Traumatology Arthroskopy (submitted).
Lampe, F., Grischke, M., Klages, C.P., Wimmer, M.A., Nassutt, R., Hille, E. und Schneider, E.	Verschleißverhalten experimenteller amorpher Kohlenwasserstoff-Beschichtungen auf Kobalt-Chrom-Hüftköpfen in der Paarung mit Polyethylen	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Z. Orthopädie (submitted).
Morlock, M., Bonin, V., Mueller G. and Schneider E.	Loading of the Lumbar Spine at the Workplace	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> A Combined Biomechanical and Epidemiological Approach, Spine (submitted).
Müller, G., Morlock, M., Vollmer, M., Honl, M., Hille, E. and Schneider	E. Intra-muscular pressures in the erector spinae and intraabdominal pressure related to posture and loading	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Spine (submitted).
Riepe, G., Chakfe, N., Whiteley, M., Nassutt, R., Morlock, M. und Imig. H.	Die Notwendigkeit eines Gefäßchirurgischen Prüflabors	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Zeitschrift der Deutschen Gesellschaft für Gefäßchirurgie 1997
Riepe, G., Heilberger, P., Umscheid, T., Chafke, N., Raithel, D., Stelter, W., Morlock, M., Kretz, J., Schröder, A. and Imig, H.	The frame dislocation of body middle rings in endovsacularstent tube grafts	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> European Journal of Vascular and Endovascular Surgery (submitted).
Spears, I.	Functional adaptations of human molars: implications for interpreting the fossil record	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> American Journal of Physical Anthroplogy (submitted).
Spears, I.	The effect of Young’s modulus of restorative material on the distribution of tensile stress at the surface of a restored molar,	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Dental Materials (submitted).
Wimmer, M., Andriacchi, T., Natarajan, R., Loos, J., Karlhuber, M., Petermann, J., Schn eider, E., Rosenberg A.	A striated pattern of wear in UHMWPE components of Miller-Galante total knee replacement	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J. Arthroplasty (submitted).
Wimmer, M.A., Andriacchi, T.P., Natarajan, R.N., Loos, J., Karlhuber, M., Petermann, J., Schneider, E. and Galante, J.O.	Early patterns of wear in retrieved UHMWPE components of total knee replacement,	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J. Arthroplasty (submitted).

1996

Brüggemann, G.-P., Morlock, M. and Zatsiorsky	V.M. (1997) Analysis of the bob and luge events (men) at the XVII olympic winter games in Lillehammer	Appl Biomech 13, No. 1, 98-108.
Duda, G., Brand, D., Freitag, S., Lierse, W., Schneider, E. (1996)	Variability of femoral muscle attachments.	J Biomech 29, No. 9, 1185-1190.
Müller, G. und Hille, E. (1996)	Muskuläre Dysbalancen im Rumpf. Möglichkeiten und Grenzen der klinischen und maschinellen Diagnostik in der Sportmedizin. (Muscular Imbalance of the Trunk - Properties and Limitations of Clinical and Machine Testing)	Part 1. Z. f. Sportmedizin 47, Nr. 4, 285-293.
Müller, G. und Hille, E. (1996)	Muskuläre Dysbalancen im Rumpf. Möglichkeiten und Grenzen der klinischen und maschinellen Diagnostik in der Sportmedizin. (Muscular Imbalance of the Trunk - Properties and Limitations of Clinical and Machine Testing)	="" style="width: 35%; vertical-align: top;" class="align_left"> rt 2. Z. f. Sportmedizin 47, Nr. 5, 312-318.
Schneider, E., Wimmer, M.A. and Nassutt, R. (1996)	Das Abriebverhalten von Prothesenoberflächen im Knochenlager	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left">Trilogie und Schmierungstechnik 43, Nr. 5, 242-244.
Schneider, E. (1997)	Res biomechanica (hamburgensis)	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Hefte zu "Der Unfallchirurg" 261, 3-5
Seide, K. und Wolter, D. (1996)	Universelle dreidimensionale Korrektur und Reposition mit dem Ringfixateur unter Anwendung der Fixateur - Anordnung.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Unfallchirurg 99, 422-424.
von Strempel, A., Krönauer, I, Morlock, M.and Schneider, E. (1996)	Stability of the instrumented spine: dynamic versus rigid instrumentation.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> SPINE: State of the Art Reviews 10, No. 3, 397-408.
Wimmer, M.A. and Andriacchi, T.P. (1997)	Tractive forces during rolling motion in the evaluation of wear in total knee replacement.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Journal of Biomechanics 30, No. 2, 131-137.
Wolter D. und Seide K. (1977)	Das intelligente Implantat.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Hefte zu "Der Unfallchirurg" 261, 236-240.
Duda, G., Schneider, E., Chao, E.Y.S. (1997)	Internal forces and moments in the femur during walking	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J Biomech (in press)
Morlock, M., Mittlmeier, Th. (1997)	Modern gait anylsis: a tool to improve shoes, insoles and the understanding of foot function	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Acta OrthBelgica (in press).
Morlock M., Bonin V. and Schneider E.(1997)	Trunk muscle activity and trunk muscle performance during an isodynamic fatigue test.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> European Journal of Applied Physiology (in press).
Müller, G., Heinold, M., Stiller, T., Schröder, J. und Pietrek, M. (1997)	Der Hamburger Rumpfmuskeltest. Ein klinischer Test zur quantitativen Erfassung von Maximalkraft und Kraftausdauer der Rumpfmuskulatur. (A Clinical Test for Quantification of Trunk Muscle Strength and Endurance).	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Z. f. Sportmedizin (in press).
Riepe, G., Loos, J., Imig, H., Schröder, A., Schneider, E., Petermann, J., Rogge, A., Ludwig, M., Schenke, A., Nassutt, R., Chafke, N. and Morlock, M. (1997)	Long-Term in-vivo Alterations of Polyester Vascular Grafts in Humans.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Europ. J. of Vascular and Endovascular Surg (in press).
Lampe, F., Grischke, M., Klages, C.P., Wimmer, M.A., Nassutt, R., Hille, E. und Schneider, E.	Verschleißverhalten experimenteller amorpher Kohlenwasserstoff-Beschichtungen auf Kobalt-Chrom-Hüftköpfen in der Paarung mit Polyethylen.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Z. Orthopädie (submitted).
Morlock, M., Bonin, V., Meyer, K. and Schneider, E.	Subjective versus Objective Workplace Loading in Nurses with and without a history of Occupationally-Related Low Back Disability.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Clinical Biomechanics (submitted).
Morlock, M., Bonin, V., Mueller G. and Schneider E.	Loading of the Lumbar Spine at the Workplace - A Combined Biomechanical and Epidemiological Approach.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> VOLVO AWARD, Spine (submitted).
Pfleiderer, M., Knecht, M., Peters, C., Schneider, E.	Initial stability and pelvic deformation with noncementedacetabular components - The influence of adjuvant screw fixation.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> Clin OrthopRel Res (submitted).
Smit, Th.H., Odgaard, A. and Schneider, E	Structure and function of vertebral trabecular bone.	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> VOLVO AWARD, Spine (submitted).
Wimmer, M.A., Andriacchi, T.P., Natarajan, R.N., Loos, J., Karlhuber, M., Petermann, J., Schneider, E. and Galante, J	Early patterns of wear in retrieved UHMWPE components of total knee replacement	="" rowspan="1" style="width: 35%; vertical-align: top;" class="align_left"> J. Arthroplasty (submitted).

Publications, Journals

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999 / 1998

1997

1996

TU Hamburg

Links