Veröffentlichungen / Publications

Download this list as BibTeX file.

2021

  • Buggisch, Christina and Gagani, Abedin and Fiedler, Bodo (2021). Capacitance measurements on integrated conductors for detection of matrix cracks in GFRP. Functional Composite Materials. 2 (1), 2. [Abstract] [doi] [www] [BibTex]

  • Doblies, Audrius and Feiler, Christian and Würger, Tim and Schill, Eduard and Meißner, Robert H. and Fiedler, Bodo (2021). Mechanical degradation estimation of thermosets by peak shift assessment: General approach using infrared spectroscopy. Polymer. 221 123585. [Abstract] [BibTex]

  • Drücker, Sven and Schulze, Martina and Ipsen, Hendrik and Bandegani, Laura and Hoch, Helge and Kluge, Maximilian and Fiedler, Bodo (2021). Experimental and numerical mechanical characterization of additively manufactured Ti6Al4V lattice structures considering progressive damage. International Journal of Mechanical Sciences. 189 105986. [doi] [BibTex]

  • Körbelin, Johann and Kötter, Benedikt and Voormann, Hauke and Brandenburg, Lukas and Selz, Stefan and Fiedler, Bodo (2021). Damage tolerance of few-layer graphene modified CFRP: From thin-to thick-ply laminates. CNT-NET 07 Special Issue with regular papers. 209 108765. [Abstract] [BibTex]

  • Kötter, Benedikt and Endres, Janina and Körbelin, Johann and Bittner, Florian and Endres, Hans-Josef and Fiedler, Bodo (2021). Fatigue and fatigue after impact behaviour of Thin- and Thick-Ply composites observed by computed tomography. Composites Part C: Open Access. 5 100139. [Abstract] [doi] [BibTex]

  • Kötter, Benedikt and Yamada, Kohei and Körbelin, Johann and Kawabe, Kazumasa and Nishikawa, Masaaki and Hojo, Masaki and Fiedler, Bodo (2021). Steel foil reinforcement for high performance bearing strength in Thin?Ply composites. Composites Part C: Open Access. 4 100085. [Abstract] [doi] [BibTex]

  • Langot, J. and Pelzmann, T. and Chávez-Gómez, P. and Boanta, C. S. and Karsten, J. and Fiedler, B. and Lévesque, M. and Robert, E. (2021). Multi-physics modeling of the ignition of polymer matrix composites (PMCs) exposed to fire. Fire Safety Journal. 122 (12), 103312. [doi] [BibTex]

  • Würger, Tim and {Di Mei} and Vaghefinazari, Bahram and Winkler, David A. and Lamaka, Sviatlana V. and Zheludkevich, Mikhail L. and Meißner, Robert H. and Feiler, Christian (2021). Exploring structure-property relationships in magnesium dissolution modulators. npj Materials Degradation. 5 (1), 117. [doi] [BibTex]

  • Yamada, Kohei and Kötter, Benedikt and Nishikawa, Masaaki and Fukudome, Shuto and Matsuda, Naoki and Kawabe, Kazumasa and Fiedler, Bodo and Hojo, Masaki (2021). Mechanical properties and failure mode of thin-ply fiber metal laminates under out-of-plane loading. Composites Part A: Applied Science and Manufacturing. 143 106267. [Abstract] [doi] [BibTex]

2020

  • Borba, N. Z. and Körbelin, J. and Fiedler, B. and {dos Santos}, J. F. and Amancio-Filho, S. T. (2020). Low-velocity impact response of friction riveted joints for aircraft application. Materials & Design. 186 108369. [Abstract] [doi] [BibTex]

  • Borba, N. Z. and Kötter, B. and Fiedler, B. and {dos Santos}, J. F. and Amancio-Filho, S. T. (2020). Mechanical integrity of friction-riveted joints for aircraft applications. Composite Structures. 232 111542. [Abstract] [doi] [BibTex]

  • Fockaert, L. I. and Würger, T. and Unbehau, R. and Boelen, B. and Meißner, R. H. and Lamaka, S. V. and Zheludkevich, M. L. and Terryn, H. and Mol, J.M.C. (2020). ATR-FTIR in Kretschmann configuration integrated with electrochemical cell as in situ interfacial sensitive tool to study corrosion inhibitors for magnesium substrates. Electrochimica Acta. 345 136166. [doi] [BibTex]

  • Gibhardt, D. and Fleschhut, C. and Fiedler, B. (2020). The influence of different glass fiber/epoxy matrix combinations on the durability under severe moisture impact. IOP Conference Series: Materials Science and Engineering. 942 012009. [doi] [BibTex]

  • Harder, Sergej and Röper, Florian and Gibhardt, Dennis and Koert, Benedikt and Fiedler, Bodo (2020). Strength of scarf-bonded CFRP repairs containing disc-shaped zones of weak bonding considering hot-wet conditioning. International Journal of Adhesion and Adhesives. 102 102643. [Abstract] [doi] [BibTex]

  • Jia, Yunlong and Fiedler, Bodo (2020). Tensile creep behaviour of unidirectional flax fibre reinforced bio-based epoxy composites. Composites Communications. 18 5--12. [Abstract] [doi] [BibTex]

  • Körbelin, Johann and Dreiner, Chiara and Fiedler, Bodo (2020). Impact of Temperature on LVI-Damage and Tensile and Compressive Residual Strength of CFRP. Composites Part C: Open Access. 100074. [doi] [BibTex]

  • Kötter, Benedikt and Karsten, Julian and Körbelin, Johann and Fiedler, Bodo (2020). CFRP Thin-Ply Fibre Metal Laminates: Influences of Ply Thickness and Metal Layers on Open Hole Tension and Compression Properties. Materials (Basel, Switzerland). 13 (4), [Abstract] [doi] [www] [BibTex]

  • Kötter, Benedikt and Yamada, Kohei and Körbelin, Johann and Kawabe, Kazumasa and Nishikawa, Masaaki and Hojo, Masaki and Fiedler, Bodo (2020). Steel foil reinforcement for high performance bearing strength in Thin-Ply composites. Composites Part C: Open Access. 100085. [Abstract] [doi] [BibTex]

  • Schütt, Fabian and Zapf, Maximilian and Signetti, Stefano and Strobel, Julian and Krüger, Helge and Röder, Robert and Carstensen, Jürgen and Wolff, Niklas and Marx, Janik and Carey, Tian and Schweichel, Marleen and Terasa, Maik-Ivo and Siebert, Leonard and Hong, Hyo-Ki and Kaps, Sören and Fiedler, Bodo and Mishra, Yogendra Kumar and Lee, Zonghoon and Pugno, Nicola M. and Kienle, Lorenz and Ferrari, Andrea C. and Torrisi, Felice and Ronning, Carsten and Adelung, Rainer (2020). Conversionless efficient and broadband laser light diffusers for high brightness illumination applications. Nature Communications. 11 (1), 72107. [Abstract] [doi] [BibTex]

  • Würger, Tim and Feiler, Christian and Vonbun-Feldbauer, Gregor B. and Zheludkevich, Mikhail L. and Meißner, Robert H. (2020). A first-principles analysis of the charge transfer in magnesium corrosion. Scientific Reports. 10 (1), 15006. [Abstract] [doi] [BibTex]

  • Yamada, K. and Nishikawa, M. and Kötter, B. and Matsuda, N. and Kawabe, K. and Fiedler, B. and Hojo, M. (2020). Effect of Ply-level Hybridization and Insertion of Metal Layers on Impact Damage Modes and Compression Strength after Impact of Thin-ply Composite Laminates: (In Japanese). Japan Society for Composite Materials. 46 (3), 104--114. [BibTex]

  • Zhang, Hao and Horvat, Joseph and Lewis, R. A. and Adelung, Rainer and Fiedler, Bodo and Mishra, Yogendra K. (2020). Aerographite phonon density of states affects double resonant Raman scattering. Journal of Applied Physics. 128 (19), 195101. [doi] [BibTex]

  • {Katharina Kröning, Beate Krause, Petra Pötschke and Bodo Fiedler} (2020). Nanocomposites with p- and n-Type Conductivity Controlled by Type and Content of Nanotubes in Thermosets for Thermoelectric Applications. Nanomaterials. 10 (1144), [Abstract] [www] [BibTex]

2019

  • Bosbach, Björn and Baytekin-Gerngross, Melike and Sprecher, Eike and Wegner, Johann and Gerngross, Mark-Daniel and Carstensen, Jürgen and Adelung, Rainer and Fiedler, Bodo (2019). Maximizing bearing fatigue lifetime and CAI capability of fibre metal laminates by nanoscale sculptured Al plies. Composites Part A: Applied Science and Manufacturing. 117 144--155. [doi] [BibTex]

  • Doblies, Audrius and Boll, Benjamin and Fiedler, Bodo (2019). Prediction of Thermal Exposure and Mechanical Behavior of Epoxy Resin Using Artificial Neural Networks and Fourier Transform Infrared Spectroscopy. Polymers. 11 (2), [Abstract] [doi] [BibTex]

  • Feiler, Christian and {Di Mei} and Vaghefinazari, Bahram and Würger, Tim and Meißner, Robert H. and Luthringer-Feyerabend, Bérengère J.C. and Winkler, David A. and Zheludkevich, Mikhail L. and Lamaka, Sviatlana V. (2019). In silico screening of modulators of magnesium dissolution. Corrosion Science. 108245. [doi] [BibTex]

  • Ghimpu, Lidia and Lupan, Oleg and Postica, Vasile and Strobel, Julian and Kienle, Lorenz and Terasa, Maik-Ivo and Mintken, Mona and Tiginyanu, Ion and Marx, Janik and Fiedler, Bodo and Adelung, Rainer (2019). Individual CdS-covered aerographite microtubes for room temperature VOC sensing with high selectivity. Materials Science in Semiconductor Processing. 100 275--282. [doi] [BibTex]

  • Gibhardt and Doblies and Meyer and Fiedler (2019). Effects of Hygrothermal Ageing on the Interphase, Fatigue, and Mechanical Properties of Glass Fibre Reinforced Epoxy. Fibers. 7 (6), 55. [doi] [BibTex]

  • Harder, S. and Schmutzler, Henrik and Hergoss, Philipp and Freese, Jens and Holtmannspötter, Jens and Fiedler, Bodo (2019). Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces. Composites Part A: Applied Science and Manufacturing. 121 299--307. [Abstract] [doi] [BibTex]

  • Hu, X. and Karnetzke, J. and Fassbender, M. and Drücker, S. and Bettermann, S. and Schroeter, B. and Pauer, W. and Moritz, H.-U. and Fiedler, B. and Luinstra, G. and Smirnova, I. (2019). Smart reactors -- Combining stimuli-responsive hydrogels and 3D printing. Chemical Engineering Journal. 123413. [doi] [BibTex]

  • Koch, Ilja and Just, Gordon and Brod, Martin and Chen, Jiuheng and Doblies, Audrius and Dean, Aamir and Gude, Maik and Rolfes, Raimund and Hopmann, Christian and Fiedler, Bodo (2019). Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading. Materials (Basel, Switzerland). 12 (11), [Abstract] [doi] [BibTex]

  • Leopold, Christian and Just, Gordon and Koch, Ilja and Schetle, Andreas and Kosmann, Julia B. and Gude, Maik and Fiedler, Bodo (2019). Damage mechanisms of tailored few-layer graphene modified CFRP cross-ply laminates. Composites Part A: Applied Science and Manufacturing. 117 332--344. [doi] [BibTex]

  • Marx, J. and Lewke, M.R.D. and Smazna, D. and Mishra, Y. K. and Adelung, R. and Schulte, K. and Fiedler, B. (2019). Processing, growth mechanism and thermodynamic calculations of carbon foam with a hollow tetrapodal morphology -- Aerographite. Applied Surface Science. 470 535--542. [doi] [BibTex]

  • Marx, J. and Roth, S. and Brouschkin, A. and Smazna, D. and Mishra, Y. K. and Schulte, K. and Adelung, R. and Fiedler, B. (2019). Tailored crystalline width and wall thickness of an annealed 3D carbon foam composites and its mechanical property. Carbon. 142 60--67. [doi] [BibTex]

  • Marx, Janik and Berns, Jan-Christoph and Spille, Claas and Mintken, Mona and Adelung, Rainer and Schlüter, Michael and Fiedler, Bodo (2019). Theoretical Computational Fluid Dynamics Study of the Chemical Vapor Deposition Process for the Manufacturing of a Highly Porous 3D Carbon Foam. Chemical Engineering & Technology. 42 (6), 1240--1246. [doi] [BibTex]

  • Meeuw, H. and Wisniewski, V. K. and Köpke, U. and Nia, A. S. and Vázquez, A. R. and Lohe, M. R. and Feng, X. and Fiedler, B. (2019). In-line monitoring of carbon nanoparticle epoxy dispersion processes. Production Engineering. 51 (4), 585. [Abstract] [doi] [BibTex]

  • Meeuw, Hauke and Körbelin, Johann and Wisniewski, Valea and Nia, Ali and Vázquez, Adrián and Lohe, Martin and Feng, Xinliang and Fiedler, Bodo (2019). Carbon Nanoparticles' Impact on Processability and Physical Properties of Epoxy Resins---A Comprehensive Study Covering Rheological, Electrical, Thermo-Mechanical, and Fracture Properties (Mode I and II). Polymers. 11 (2), 231. [Abstract] [doi] [BibTex]

  • Plunkett, Alexander and Kröning, Katharina and Fiedler, Bodo (2019). Highly Optimized Nitrogen-Doped MWCNTs through In-Depth Parametric Study Using Design of Experiments. Nanomaterials (Basel, Switzerland). 9 (4), [Abstract] [doi] [BibTex]

  • Schuett, M. and Karsten, J. and Schott, L. and Wittich, H. and Schulte, K. and Fiedler, B. (2019). Experimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loading. CEAS Aeronautical Journal. 10 (2), 565--587. [Abstract] [doi] [BibTex]

  • Strobel, Julian and Ghimpu, Lidia and Postica, Vasile and Lupan, Oleg and Zapf, Maximilian and Schönherr, Sven and Röder, Robert and Ronning, Carsten and Schütt, Fabian and Mishra, Yogendra Kumar and Tiginyanu, Ion and Adelung, Rainer and Marx, Janik and Fiedler, Bodo and Kienle, Lorenz (2019). Improving gas sensing by CdTe decoration of individual Aerographite microtubes. Nanotechnology. 30 (6), 065501. [Abstract] [doi] [BibTex]

  • Studer, Julia and Dransfeld, Clemens and {Jauregui Cano}, Jon and Keller, Andre and Wink, Marianne and Masania, Kunal and Fiedler, Bodo (2019). Effect of fabric architecture, compaction and permeability on through thickness thermoplastic melt impregnation. Composites Part A: Applied Science and Manufacturing. 122 45--53. [doi] [BibTex]

  • Sui, X. M. and Tiwari, M. and Greenfeld, I. and Khalfin, R. L. and Meeuw, H. and Fiedler, B. and Wagner, H. D. (2019). Extreme scale-dependent tensile properties of epoxy fibers. Express Polymer Letters. 13 (11), 993--1003. [doi] [BibTex]

  • Taale, Mohammadreza and Krüger, Diana and Ossei-Wusu, Emmanuel and Schütt, Fabian and {Ur Rehman}, Muhammad Atiq and Mishra, Yogendra Kumar and Marx, Janik and Stock, Norbert and Fiedler, Bodo and Boccaccini, Aldo R. and Willumeit-Römer, Regine and Adelung, Rainer and Selhuber-Unkel, Christine (2019). Systematically designed periodic electrophoretic deposition for decorating 3D carbon-based scaffolds with bioactive nanoparticles. ACS Biomaterials Science & Engineering. [BibTex]

  • Taale, Mohammadreza and Schütt, Fabian and Carey, Tian and Marx, Janik and Mishra, Yogendra Kumar and Stock, Norbert and Fiedler, Bodo and Torrisi, Felice and Adelung, Rainer and Selhuber-Unkel, Christine (2019). Biomimetic Carbon Fiber Systems Engineering: A Modular Design Strategy To Generate Biofunctional Composites from Graphene and Carbon Nanofibers. ACS applied materials & interfaces. 11 (5), 5325--5335. [Abstract] [doi] [BibTex]

2018

  • Augustin, T. and Karsten, J. and Fiedler, B. (2018). Detection and localization of impact damages in carbon nanotube--modified epoxy adhesive films with printed circuits. Structural Health Monitoring: An International Journal. in press. [Abstract] [BibTex]

  • Augustin, T. and Karsten, J. and Kötter, B. and Fiedler, B. (2018). Health monitoring of scarfed CFRP joints under cyclic loading via electrical resistance measurements using carbon nanotube modified adhesive films. Composites Part A: Applied Science and Manufacturing. 105 150--155. [Abstract] [doi] [BibTex]

  • Backes, E. and Passador, F. and Leopold, C. and Fiedler, B. and Pessan, L. (2018). Electrical, thermal and thermo-mechanical properties of epoxy/multi-wall carbon nanotubes/mineral fillers nanocomposites. Journal of Composite Materials. in press. [Abstract] [doi] [BibTex]

  • Bosbach, B. and Ohle, C. and Fiedler, B. (2018). Structural health monitoring of fibre metal laminates under mode I and II loading. Composites Part A: Applied Science and Manufacturing. 107 471--478. [Abstract] [doi] [BibTex]

  • Bosbach, Björn and Baytekin-Gerngross, Melike and Heyden, Emil and Gerngross, Mark-Daniel and Carstensen, Jürgen and Adelung, Rainer and Fiedler, Bodo (2018). Reaching maximum inter-laminar properties in GFRP/nanoscale sculptured aluminium ply laminates. Composites Science and Technology. 167 32--41. [BibTex]

  • Drücker, S. and Inman, S. and Fiedler, B. (2018). Simulation and Optimization of the Load Introduction Geometry of Additively Manufactured Lattice Structure Specimens. ECCM18 - 18th European Conference on Composite Materials. [BibTex]

  • Fiedler, Bodo and Schulte, Karl (2018). 6.8 Carbon Nanotube-Based Composites. 201--229. [doi] [BibTex]

  • Harder, S. and Goralski, P. and Scharnagl, N. and Hergoss, P. and Schmutzler, H. and Fiedler, B. (2018). Effect of laser surface treatment on the adhesive properties of bonded CFRP joints. 18th European Conference on Composite Materials (ECCM18). [Abstract] [BibTex]

  • Hu, X. and Karnetzke, J. and Fassbender, M. and Drücker, S. and Fiedler, B. and Luinstra, G. and {Smirnova I.} (2018). Intelligente Reaktoren: Kombination von Stimuli-Responsiven Hydrogelen und 3D-Druck. [BibTex]

  • Jia, Yunlong and Fiedler, Bodo (2018). Influence of Furfuryl Alcohol Fiber Pre-Treatment on the Moisture Absorption and Mechanical Properties of Flax Fiber Composites. Fibers. 6 (3), 59. [doi] [BibTex]

  • Körbelin, Johann and Derra, Manuel and Fiedler, Bodo (2018). Influence of temperature and impact energy on low velocity impact damage severity in CFRP. Composites Part A: Applied Science and Manufacturing. 115 76--87. [Abstract] [doi] [BibTex]

  • Kötter, B. and Polyak, D. and Körbelin, J.C. and Fiedler, B. (2018). Influence of ply thickness on failure initiation, propagation and mechanical properties in CFRP laminates. 7th International Conference on Fatigue of Composites (ICFC 7). 1--10. [BibTex]

  • Leopold, Christian and Harder, S. and Philipkowski, Timo and Liebig, Wilfried V. and Fiedler, Bodo (2018). Comparison of Analytical Approaches Predicting the Compressive Strength of Fibre Reinforced Polymers. Materials (Basel, Switzerland). 11 (12), [Abstract] [doi] [BibTex]

  • Marx, J. and Brouschkin, A. and Roth, S. and Smazna, D. and Mishra, Y. K. and Wittich, H. and Schulte, K. and Adelung, R. and Fiedler, B. (2018). Fundamentals of the temperature-dependent electrical conductivity of a 3D carbon foam---Aerographite. Synthetic Metals. 235 145--152. [Abstract] [doi] [BibTex]

  • Marx, J. and Wilhelmy, F. and Beisch, H. and Fiedler, B. (2018). Manufacturing of a hierarchical carbon foam with tailored catalytically Me/Me x O y particles. Vacuum. 155 490--495. [Abstract] [doi] [BibTex]

  • Meeuw, H. and Körbelin, J. and von Bernstorff, D. and Augustin, T. and Liebig, W. V. and Fiedler, B. (2018). Smart dispersion: Validation of OCT and impedance spectroscopy as solutions for in-situ dispersion analysis of CNP/EP-composites. Materialia. 1 185--197. [Abstract] [doi] [BibTex]

  • Meeuw, Hauke and Radek, Markus and Fiedler, Bodo (2018). Development of a colored GFRP with antistatic properties. AIP Publishing. 71 (3), 586--590. [Abstract] [doi] [BibTex]

  • Meeuw, Hauke and Wisniewski, Valea and Fiedler, Bodo (2018). Frequency or Amplitude?---Rheo-Electrical Characterization of Carbon Nanoparticle Filled Epoxy Systems. Polymers. 10 (9), 999. [Abstract] [doi] [BibTex]

  • Plesco, Irina and Strobel, Julian and Schütt, Fabian and Himcinschi, Cameliu and {Ben Sedrine}, Nabiha and Monteiro, Teresa and Correia, Maria Rosário and Gorceac, Leonid and Cinic, Boris and Ursaki, Veaceslav and Marx, Janik and Fiedler, Bodo and Mishra, Yogendra Kumar and Kienle, Lorenz and Adelung, Rainer and Tiginyanu, Ion (2018). Hierarchical Aerographite 3D flexible networks hybridized by InP micro/nanostructures for strain sensor applications. Scientific reports. 8 (1), 13880. [Abstract] [doi] [BibTex]

  • Smazna, D. and Shree, S. and Hoppe, M. and Hansen, L. and Marx, J. and Dittman, J. and Zaho, K. and Fiedler, B. and Holger, K. and Adelung, R. (2018). Surface modification of highly porous 3D networks via atmospheric plasma treatment. Contributions to Plasma Physics. 14 (3), 1600137. [doi] [BibTex]

  • Würger, Tim and Heckel, Wolfgang and Sellschopp, Kai and Müller, Stefan and Stierle, Andreas and Wang, Yuemin and Noei, Heshmat and Feldbauer, Gregor (2018). Adsorption of Acetone on Rutile TiO 2 : A DFT and FTIRS Study. The Journal of Physical Chemistry C. 122 (34), 19481--19490. [Abstract] [doi] [BibTex]

2017

  • Augustin, T. and Fiedler, B. (2017). Health monitoring of CFRP using printed circuits. JEC Composites Magazine. (117), 61--63. [Abstract] [BibTex]

  • Augustin, T. and Grunert, D. and Langner, H. H. and Haverkamp, V. and Fiedler, B. (2017). Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink. Advanced Manufacturing: Polymer & Composites Science. 3 (3), 110--119. [Abstract] [doi] [BibTex]

  • Augustin, T. and Karsten, J. and Fiedler, B. (2017). Impact Damage Detection and Localization of Adhesively Bonded Fiber Reinforced Structures using Silver Nanoparticle Based Printed Circuits. Structural Health Monitoring 2017. 1461--1468. [Abstract] [BibTex]

  • Bosbach, B. and Ohle, C. and Fiedler, B. (2017). Structural Health Monitoring of Multifunctional Fibre Metal Laminates under Mode I Loading. Structural Health Monitoring 2017. 1976--1983. [BibTex]

  • Drücker, S. and Schneider, K. and Ghothra, N.-K. and Bargmann, S. (2017). Finite element simulation of pole vaulting. Sports Engineering. 9 (2), 123. [doi] [BibTex]

  • Drücker, S. and Wilmers, J. and Bargmann, S. (2017). Influence of the microstructure on effective mechanical properties of carbon nanotube composites. Coupled systems mechanics. 6 (1), 1--15. [doi] [BibTex]

  • Garlof, S. and Mecklenburg, M. and Smazna, D. and Mishra, Y. K. and Adelung, R. and Schulte, K. and Fiedler, B. (2017). 3D carbon networks and their polymer composites: Fabrication and electromechanical investigations of neat Aerographite and Aerographite-based PNCs under compressive load. Carbon. 111 103--112. [Abstract] [doi] [www] [BibTex]

  • Harder, S. and Grossheider, K. and Hergoss, P. and Schmutzler, H. and Fiedler, B. (2017). Ytterbium Fibre Laser Surface Pre-Treatment of CFRP Soft Patch Repairs. SAMPE Conference 2017 Stuttgart. [Abstract] [BibTex]

  • Heckel, Wolfgang and Würger, Tim and Müller, Stefan and Feldbauer, Gregor (2017). Van der Waals Interaction Really Matters: Energetics of Benzoic Acid on TiO 2 Rutile Surfaces. The Journal of Physical Chemistry C. 121 (32), 17207--17214. [Abstract] [doi] [BibTex]

  • Leopold, C. and Augustin, T. and Schwebler, T. and Lehmann, J. and Liebig, W. V. and Fiedler, B. (2017). Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes. Journal of Colloid and Interface Science. 506 620--632. [Abstract] [doi] [BibTex]

  • Leopold, C. and Augustin, T. and Schwebler, T. and Liebig, W. V. and Wittich, H. and Fiedler, B. (2017). Influence of carbon nanoparticle geometry in epoxy matrix on mechanical properties and failure initiation regarding the size effect. 21st International Conference on Composite Materials (ICCM). [Abstract] [BibTex]

  • Leopold, C. and Schetle, A. and Kosmann, J. and Fiedler, B. (2017). Ply-tailored nanoparticle matrix modification in cross-ply CFRP laminates. 21st International Conference on Composite Materials (ICCM). [Abstract] [BibTex]

  • Leopold, C. and Schütt, M. and Liebig, W. V. and Philipkowski, T. and Kürten, J. and Schulte, K. and Fiedler, B. (2017). Compression Fracture of CFRP Laminates Containing Stress Intensifications. Materials (Basel, Switzerland). 10 (9), [Abstract] [doi] [BibTex]

  • Lupan, O. and Postica, V. and Marx, J. and Mecklenburg, M. and Mishra, Y. K. and Schulte, K. and Fiedler, B. and Adelung, R. (2017). Individual hollow and mesoporous aero-graphitic microtube based devices for gas sensing applications. Applied Physics Letters. 110 (26), 263109. [doi] [BibTex]

  • Marx, J. and Beisch, H. and Garlof, S. and Fiedler, B. (2017). Structural improvement of a bio-inspired 3D globular carbon foam by a continuously thermal treatment: A comprehensive study. Advanced Material Science. 2 (4), [doi] [BibTex]

  • Marx, J. and Garlof, S. and Timmermann, J. and Smazna, D. and Adelung, R. and Schulte, K. and Fiedler, B. (2017). Growth model of a carbon based 3D structure (Aerographite) and electrical/mechanical properties of composites. 21st International Conference on Composite Materials (ICCM). [BibTex]

  • Meeuw, H. and Leopold, C. and Kosmann, J. and Schetle, A. and Liebig, W. V. and Fiedler, B. (2017). Influence of carbon nanoparticle modification on crack initiation in CFRP cross-ply laminates and potential for SHM. [BibTex]

  • Meija, R. and Signetti, S. and Schuchardt, A. and Meurisch, K. and Smazna, D. and Mecklenburg, M. and Schulte, K. and Erts, D. and Lupan, O. and Fiedler, B. and Mishra, Y. K. and Adelung, R. and Pugno, N. M. (2017). Nanomechanics of individual aerographite tetrapods. Nature communications. 8 14982. [Abstract] [doi] [BibTex]

  • Rana, S. and Fangueiro, R. and Thakur, V. K. and Joshi, M. and Thomas, S. and Fiedler, B. (2017). Nanomaterials from Natural Products for Industrial Applications. Journal of Nanomaterials. 2017 1--2. [doi] [BibTex]

  • {Wojciech Szmyt, Katharina Kröning, Bodo Fiedler, and Clemens Dransfeld} (2017). Carbon fiber-carbon nanotube multiscale composites - The key to multifunctionality. [BibTex]

2016

  • Augustin, T. and Langner, H. and Haverkamp, V. and Fiedler, B. (2016). Online-monitoring of carbon fiber reinforced plastics using silver nanoparticle based ink. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Bosbach, B. and Meeuw, H. and Fiedler, B. (2016). Characterisation of fibre-metal-laminates under bearing loading. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Chandrasekaran, S. and Liebig, W.. and Mecklenburg, M. and Fiedler, B. and Smazna, D. and Adelung, R. and Schulte, K. (2016). Fracture, failure and compression behaviour of a 3D interconnected carbon aerogel (Aerographite) epoxy composite. Composites Science and Technology. 122 50--58. [Abstract] [doi] [www] [BibTex]

  • Garlof, S. and Fiedler, B. (2016). Template-free, facile synthesis of core-shell carbon networks. 4th international conference on Nanomechanics and Nanocomposites (ICNN 4). [www] [BibTex]

  • Garlof, S. and Fukuda, T. and Mecklenburg, M. and Smazna, D. and Mishra, Y. K. and {Adelung, R. Schulte, K.} and Fiedler, B. (2016). Electro-mechanical piezoresistive properties of three dimensionally interconnected carbon aerogel (Aerographite)-epoxy composites. Composites Science and Technology. 134 226--233. [Abstract] [doi] [www] [BibTex]

  • Garlof, S. and Mecklenburg, M. and Adelung, R. and Smazna, D. and Fiedler, B. and Schulte, K. (2016). Electrical and thermal conductivity of aerogel/epoxy composites. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Garlof, Svenja and Fiedler, Bodo (2016). Template-free, facile synthesis of core--shell carbon networks. Nanocomposites. 2 (4), 153--161. [doi] [BibTex]

  • Jiang, B. and Peng, H. and Wu, W. and Jia, Y. and Zhang, Y. (2016). Numerical Simulation and Experimental Investigation of the Viscoelastic Heating Mechanism in Ultrasonic Plasticizing of Amorphous Polymers for Micro Injection Molding. Polymers. 8 (5), 199. [Abstract] [doi] [www] [BibTex]

  • Johannsen, I. and Jaksik, K. and Wirch, N. and Pötschke, P. and Fiedler, B. and Schulte, K. (2016). Electrical conductivity of melt-spun thermoplastic poly(hydroxy ether of bisphenol A) fibres containing multi-wall carbon nanotubes. Polymer. 97 80--94. [doi] [www] [BibTex]

  • Lamprecht, C. and Taale, M. and Paulowicz, I. and Westerhaus, H. and Grabosch, C. and Schuchardt, A. and Mecklenburg, M. and Bottner, M. and Lucius, R. and Schulte, K. and Adelung, R. and Selhuber-Unkel, C. (2016). A Tunable Scaffold of Microtubular Graphite for 3D Cell Growth. ACS applied materials & interfaces. 8 (24), 14980--14985. [Abstract] [doi] [www] [BibTex]

  • Leopold, C. and Harder, S. and Buggisch, C. and Liebig, W. and Fiedler, B. (2016). Influence of 90°-layer thickness on damage initiation and propagation in cfrp cross-ply laminates. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Leopold, C. and Liebig, W. and Wittich, H. and Fiedler, B. (2016). Influence of graphene nanoparticles on the size effect of epoxy matrix. 17th European Conference on Composite Materials (ECCM17). [Abstract] [BibTex]

  • Leopold, C. and Liebig, W. V. and Wittich, H. and Fiedler, B. (2016). Size effect of graphene nanoparticle modified epoxy matrix. Composites Science and Technology. 134 217--225. [doi] [BibTex]

  • Leopold, Christian and Liebig, Wilfried V. and Fiedler, Bodo (2016). Damage initiation and failure mechanisms at nanoparticles in polymer nanocomposites with regard to the size effect: 4th international conference on Nanomechanics and Nanocomposites (ICNN 4). [BibTex]

  • Liebig, W. V. and Leopold, C. and Hobbiebrunken, T. and Fiedler, B. (2016). New test approach to determine the transverse tensile strength of CFRP with regard to the size effect. Composites Communications. 1 54--59. [doi] [BibTex]

Displaying results 1 to 100 out of 352

Page 1

Page 2

Page 3

Page 4

Next >