2025

• Evers, Lasse; Müller, Matthias; Möller, Carsten; Brouschkin, Alexander; Dege, Jan Hendrik
  Control loop based dimensional error compensation for milling of near-net-shaped, thin-walled structures - Conference Proceedings
  Decarbonizing Value Chains, ed. by Holger Kohl, Günther Seliger, Franz Dietrich, Ha Thuc Vien: 399-407 (2025)
  Open Access | Verlags DOI
• Mundt, Christopher; Weidner, Robert; Möller, Carsten; Dege, Jan Hendrik; Lödding, Hermann
  Der befähigte Werker: Kopplung von Smarten Handwerkzeugen, aktiven Exoskeletten und Digitalen Assistenzsystemen in der Produktion der Zukunft - Journal Article
  Zeitschrift für Wirtschaftlichen Fabrikbetrieb 120 (6): 457-463 (2025)
  Verlags DOI
• Brouschkin, Alexander; Möller, Carsten; Dege, Jan Hendrik
  Modeling Process Forces in CFRP Grinding: Influence of Cutting Materials and Coolant on Process Force Behavior - Conference Paper
  20th CIRP Conference on Modeling of Machining Operations, CMMO 2025
  Open Access | Verlags DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Model based assessment of maximal surface temperatures and heat flow in edge trimming of UD CFRP with tools of different type - Journal Article
  Composites Part B: Engineering 300: 112483 (2025)
  Open Access | Verlags DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  The role of material properties in modeling maximal surface temperatures and heat distribution in milling of UD CFRP - Review
  CIRP journal of manufacturing science and technology 62: 24-37 (2025)
  Verlags DOI

2024

• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut - Conference Paper
  3rd CIRP Conference on Composite Material Parts Manufacturing, CCMPM2024
  Open Access | Verlags DOI
• Hintze, Wolfgang; Shchegel, Ganna; Mehnen, Jan Philipp; Möller, Carsten; Dege, Jan Hendrik
  Modeling of temperature fields in milling of unidirectionally reinforced CFRP depending on the fibre orientation angle and the effective width of cut - Conference Paper
  Procedia CIRP 131: 19-25 (2025)
  Open Access | Verlags DOI
• Brouschkin, Alexander; Otto, Niklas; Möller, Carsten; Dege, Jan Hendrik
  Surface quality during grinding of CFRP - Journal Article
  ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb 119 (7/8): 558-562 (2024)
  Verlags DOI
• Flehmke, Malte; Hinrichs, Marco; Möller, Carsten; Dege, Jan Hendrik
  Cutting carbon footprint with smart tool management and cemented carbide (WC-Co) upcycling - Conference Paper
  6th Conference on Production Systems and Logistics, CPSL 2024
  Verlags DOI

2023

• Junghans, Sebastian; Flehmke, Malte; Stützle, Joshua; Möller, Carsten; Dege, Jan Hendrik
  Enhancing Tool Replacement Decisions in Milling of Ti-6Al-4V Using Convolutional Neural Networks and Time-series-to-image Encoding - Conference Paper
  Research Paper Series, SSRN (2023-11-29)
  Verlags DOI
• Evers, Lasse; Blühm, Melchior Frieder; Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  Characterization of the surface error during peripheral milling of thin-walled, near-net-shaped structures - Conference Paper
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Verlags DOI
• Flehmke, Malte; Junghans, Sebastian; Jessen, Andreas; Shchegel, Ganna; Möller, Carsten; Dege, Jan Hendrik
  Improving Efficiency and Sustainability Through Predictive Tool Wear Monitoring During Manual Drilling of CFRP - Conference Paper
  Congress of the German Academic Association for Production Technology (WGP 2023)
  Verlags DOI
• Junghans, Sebastian; Möller, Carsten; Dege, Jan Hendrik
  ML-Modelle für den intelligenten Werkzeugwechsel - Journal Article
  Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (11): 752-757 (2023-11)
  Verlags DOI
• Evers, Lasse; Müller, Matthias; Möller, Carsten; Dege, Jan Hendrik
  Dimensional Error Compensation during Finish Milling - Journal Article
  Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 118 (10): 688-692 (2023-10-19)
  Verlags DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina; Dege, Jan Hendrik; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Oxidation and wear behavior of CrAlMoN with varied Mo-content for cutting Ti6Al4V - Journal Article
  Production Engineering 18: 87-97 (2024)
  Open Access | Verlags DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlMoN high performance tool coatings for machining of TiAl6V4 - Journal Article
  Production Engineering 17 (3-4): 437-444 (2023-06)
  Open Access | Verlags DOI

2022

• Romanenko, Denys; Jothi Prakash, Vishnuu; Kuhn, Tobias; Möller, Carsten; Hintze, Wolfgang; Emmelmann, Claus
  Effect of DED process parameters on distortion and residual stress state of additively manufactured Ti-6Al-4V components during machining - Journal Article
  Procedia CIRP 111: 271-276 (2022)
  Open Access | Verlags DOI
• Hintze, Wolfgang; Möller, Carsten; Ploog, Petter; Bobzin, Kirsten; Kalscheuer, Christian; Stachowski, Nina
  Influence of self-lubricating tool coatings on cutting temperature and coefficient of friction during turning of Ti6Al4V - Conference Paper
  20th Plansee Seminar (2022)
  

2021

• Bobzin, Kirsten; Brögelmann, Tobias; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Self-lubricating CrAlVN coatings for turning of Ti6Al4V: oxidation and wear behavior - Journal Article
  Materialwissenschaft und Werkstofftechnik 52 (12): 1394-1412 (2021-12)
  Open Access | Verlags DOI
• Bobzin, Kirsten; Kalscheuer, Christian; Carlet, Marco; Stachowski, Nina; Hintze, Wolfgang; Möller, Carsten; Ploog, Petter
  Wear development of self-lubricating CrAlVN coatings during turning Ti6Al4V - Journal Article
  SSRN eLibrary: 70-77 (2021)
  Open Access | Verlags DOI
• Möller, Carsten; Hintze, Wolfgang; Wenserski, Robert von
  Impact separation of support structures from laser powder bed fusion generated LPBF parts - Conference Paper
  11th Congress of the German Academic Association for Production Technology (WGP 2021)
  Verlags DOI
• Möller, Carsten; Dege, Jan Hendrik; Heuwinkel, Markus
  Entwicklung eines tangentialen Walzenstirnfräskonzeptes für Titanstrukturbauteile - Conference Presentation
  Hanser Tagungen "Schwer zerspanbare Werkstoffe in der industriellen Praxis" (2021)
  
• Hintze, Wolfgang; Möller, Carsten; Romanenko, Denys; Junghans, Sebastian
  Adaptive Präzisionsbearbeitung additiv gefertigter Leichtbaustrukturen in der digitalisierten Prozesskette - Journal Article
  Unter Span: 42-43 (2021)
  

2020

• Hintze, Wolfgang; Ploog, Petter; Blühm, Melchior; Möller, Carsten
  Development of a process-oriented tribological test rig for the performance assessment of tool coatings in turning of titanium Ti6Al4V - Journal Article
  SSRN eLibrary 20: 107-115 (2020)
  Verlags DOI
• Hintze, Wolfgang; Rosenthal, Oliver; Möller, Carsten
  Was die Stabilität von Werkzeugspannmitteln beeinflusst - Research Report
  VDW-Branchenreport September 2020
  
• Hintze, Wolfgang; Rosenthal, Oliver; Möller, Carsten
  Tool holder influence in roughing with end mills - Technical Report
  CIRP Winter Meetings (2020-02-21)
  
• Rosenthal, Oliver; Hintze, Wolfgang; Möller, Carsten
  Assessment of tool holder performance in roughing with end mills: Process dynamics and surface formation - Journal Article
  Production Engineering 14: 253-263 (2020-01-08)
  Verlags DOI
• Hintze, Wolfgang; Wenserski, Robert von; Junghans, Sebastian; Möller, Carsten
  Finish machining of Ti6Al4V SLM components under consideration of thin walls and support structure removal - Journal Article
  Procedia Manufacturing (48): 485-491 (2020)
  Open Access | Verlags DOI

2019

• Hintze, Wolfgang; Wenserski, Robert von; Möller, Carsten
  Assessment of support structures with regard to their machinability in simultaneous precision machining of SLS Ti6AI4V parts - Technical Report
  CIRP Winter Meetings, Paris (2019-02-20)
  
• Hintze, Wolfgang; Lödding, Hermann; Friedewald, Axel; Mehnen, Jan Philipp; Romanenko, Denys; Möller, Carsten; Brillinger, Christoph; Sikorra, Jan Niklas
  Digital assistance systems for smart drilling units in aircraft structural assembly - Conference Paper
  Proceedings of the 7th International Workshop on Aircraft System Technologies: 255-266 (2019-02)
  

2018

• Hintze, Wolfgang; Schötz, Robert; Mehnen, Jan Philipp; Köttner, Lars; Möller, Carsten
  Helical milling of bore holes in Ti6Al4V parts produced by selective laser melting with simultaneous support structure removal - Journal Article
  Procedia Manufacturing (18): 89-96 (2018)
  Open Access | Verlags DOI

2017

• Hintze, Wolfgang; Wenserski, Robert von; Möller, Carsten
  Finish Machining of Titanium Components - Challenges of New Process Chains and Recent Alloys - Conference Paper
  Proceedings of the 4th International Workshop on Aircraft System Technologies: 479-507 (2013)
  

2015

• Hintze, Wolfgang; Möller, Carsten; Steinbach, Stefan
  Fräsen von gesintertem Hartmetall - Journal Article
  Unter Span: 19 (2015)
  

2013

• Hintze, Wolfgang; Möller, Carsten
  Hochleistungs-Schlichtfräsen dünnwandiger Titanbauteile - Journal Article
  Unter Span: 13 (2013)
  

2011

• Hintze, Wolfgang; Möller, Carsten
  Innovation in der Zerspanungstechnologie von Leichtbauwerkstoffen - Journal Article
  Unter Span (2011)
  

2010

• Hintze, Wolfgang; Möller, Carsten
  Diamanten machen's möglich - Polierschleifprozess erzeugt automatisiert spiegelnde Oberflächen - Journal Article
  Form + Werkzeug: (2010)
  

2009

• Möller, Carsten
  Untersuchungen zum Drehen von gesinterten WC-Co-Hartmetallwalzringen - Doctoral Thesis
  Wissen schafft Innovation 7: (2009)
  

2006

• Hintze, Wolfgang; Möller, Carsten
  Randzonenuntersuchung an gedrehten Hartmetallbauteilen - Journal Article
  Industrie-Diamanten-Rundschau 40 (2): 48-55 (2006)
  

2004

• Hintze, Wolfgang; Möller, Carsten
  Drehtechnologie für Hartmetallwalzen - Conference Paper
  Der Kalibreur 66: 9-12 (2004)
  
• Hintze, Wolfgang; Gotsch, Falko; Möller, Carsten; Püschel, Arndt; Santos Quiroz, Salvador; Stöver, Enno
  Manche mögen's nicht so heiß - Thermische Wechselwirkungen beim Trockenbohren von Leichtbaustrukturen - Journal Article
  Maschinenmarkt 110 (37): 78-83 (2004)
  

2003

• Hintze, Wolfgang; Nedeß, Christian; Möller, Carsten
  Auf die harte Tour - CVD-Dickschichtdiamant verringert den Verschleiß und die Zerspankräfte in der Hartmetallbearbeitung - Journal Article
  Maschinenmarkt 109 (25): 26-30 (2003)
  

2002

• Nedeß, Christian; Hintze, Wolfgang; Halver, Maja; Möller, Carsten
  Hartdrehen statt Schleifen - HSS-Schneidplatten flexibel, wirtschaftlich und funktionsgerecht hart bearbeiten - Journal Article
  Maschinenmarkt 108 (25): 38-43 (2002)
  
• Hintze, Wolfgang; Möller, Carsten
  Heutige Tendenzen der Ultrahartbearbeitung - Ein Bericht der TUHH über das Drehen gesinterter Hartmetallwalzen - Journal Article
  Mensch und Technik III: 14-16 (2002)