Forschungsbericht 2008

M-3 Biomechanik

Kooperationen

• AO Forschungsinstitut Davos, Schweiz
• Aesculap
• Asklepios Klinik Altona
• Asklepios Klinik Harburg
• Asklepios Klinik St. Georg
• BSN medical GmbH & Co. KG
• Berufsgenossenschaftliches Unfallkrankenhaus Hamburg
• Biomet
• Bode - Stiftung
• Bundesanstalt für Arbeitsschutz und Arbeitsmedizin
• DePuy
• Department of Orthopedic Surgery, Rush Presbyterian St. Luke's Medical Center, Chicago
• Deutsche Sporthochschule Köln
• Dr.h.c. Robert Mathys Stiftung
• ENDO-Klinik Hamburg
• ESKA Implants
• Fraunhofer Institut für Schicht- & Oberflächentechnik, Braunschweig
• GKSS
• Klinikum Eilbek
• Litos Gmbh & Co. KG
• Smith & Nephew
• Stryker Howmedica
• TU Kaiserslautern
• Universität Hannover
• Universität des Saarlandes
• Universitätsklinikum Hamburg-Eppendorf (UKE)
• Vascutek
• Waldemar LINK GmbH & Co. KG
• Zimmer

Publikationen

Veröffentlichungen

• 5-10.001V
  

  Götzen, N., Nassutt, R., Lampe, F. and Morlock, M. (2005), Load-shift - numerical evaluation of a new design philosophy for uncemented hip prostheses. Journal of Biomechanics 38(3):595-604.

• 5-10.002V
  

  Seebeck J., Goldhahn J., Morlock M., Schneider E. (2005), Mechanical Behaviour of Screws in Normal and Osteoporotic Bone. Osteoporosis International 16 Suppl 2:S107-11.

• 5-10.003V
  

  Nagel-Heyer S., Goepfert C., Morlock M. and Pörtner, R. (2005), Relationship between gross morphological and biochemical data of tissue engineered cartilage-carrier-constructs. Biotechnology Letters (27):187-192.

• 5-10.004V
  

  Huber, G., Paetzold, H., Püschel, K., Morlock, M. (2005), Verhalten von Wirbelsäulensegmenten bei dynamischer Belastung. Schriftenreihe der Bundesanstalt für Arbeitsschutz und Arbeitsmedizin, Fb 1062, Wirtschaftsverlag, Dresden.

• 5-10.006V
  

  Morlock, M., Bishop, N. (2005), The bigger the better - Tribologie aus der Sicht des Großkopfes. Orthopaedic Dimensions 2 / 2005, p. 16-18.

• 5-10.005V
  

  Honl M, Schwieger K, Gauck CH, Lampe F, Morlock MM, Wimmer MA, Hille E. (2005), Comparison of total hip replacements cup orientation and position using different navigation systems and the conventional manual technique. Orthopäde 34(11):1131-6.

• 5-10.007V
  

  Morlock, M. (2005), Editorial. Clinical Biomechanics 20(9):S1.

• 5-10.008V
  

  Morlock, M., Spears, I., Pfleiderer, M., Schneider, E. (2005), Micromotion at the bone-implant interface. Proceedings of the 1st GAMM Seminar on Continuum Biomechanics. Editors. W. Ehlers B. Markert. Report No. II-14, Glückauf Verlag, Essen, p.99-108.

• 5-10.009V
  

  Jin, Z., Meakins, S., Morlock, M., Parsons, P., Hardaker, C., Flett, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 1: experimental simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 299-309.

• 5-10.010V
  

  Yew, A., Jin, Z., Donn, A., Morlock, M., Isaac, G. (2006), Deformation of press-fitted metallic resurfacing cups. Part 2: finite element simulation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p. 311-319.

• 5-10.011V
  

  Morlock, M., Bishop, N., Rüther, W., Delling, G., Hahn, M. (2006), Biomechanical, morphological and histological analysis of early failures in hip resurfacing arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 333-344.

• 5-10.012V
  

  Siebel, Th., Maubach, S., Morlock, M. (2006), Lessons Learned from Early Clinical Experience and Results of 300 ASRR Hip Resurfacing Implantations. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Volume 220, Number 2, p 345-353.

• 5-10.013V
  

  Jeffers, J.R.T., Westphal, F.M., Morlock, M.M., Taylor, M., The relationship between the initial mechanical environment and migration in cementless hip arthroplasty: computational and experimental testing. Journal of Orthopaedic Research (submitted)

• 5-10.025V
  

  Morlock, M. (2005), Micromotion at the bone-implant interface. Abstract book, 1st GAMM Seminar on Continuum Biomechanics, p. 13-14, Freudenstadt.

• 5-10.026V
  

  Gebert, A., Stampe, M., Drösser, Th., Wintzer, Ch., Püschel, K., Imig, H., Morlock, M. (2005), Migrationsverhalten von Stentprothesen. Jahrestagung der DGfB, Hamburg, p. 54.

• 5-10.028V
  

  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M. (2005), Die Maus als Modellorganismus für humane Skeletterkrankungen - eine biomechanische Studie. Jahrestagung der DGfB, Hamburg, p. 21.

• 5-10.029V
  

  Wintzer, Ch., Gebert, A., Debus, S., Imig, H., Morlock, M. (2005); Abdichtung von Stentgraftprothesen. Jahrestagung der DGfB, Hamburg, p. 45.

• 5-10.030V
  

  Westphal, F. Bishop, N., Vollmer, M., Sellenschloh, K., Püschel, K., Morlock, M. (2006), Vergleich der Primärstabilität zwischen einer metaphysär verankerten Hüft- und herkömmlichen Schraftprotheses. Jahrestagung der DGfB, Hamburg, p. 44.

• 5-10.031V
  

  Weichert, H., Gebert, A., Kortmann, H., Morlock, M. (2005), Zugbelastung der End-zu-Seit Anastomose im PTFE-Modell unter Variation der Arteriotomieform. Jahrestagung der DGfB, Hamburg, p. 175.

• 5-10.032V
  

  Seebeck, J., Duda, G., Morlock, M., Schneider, E. (2005), Osteosynthese proximaler Tibiafrakturen durch einen internen Fixateur unter Berücksichtigung individueller Knochenqualitäten. Jahrestagung der DGfB, Hamburg, p. 63.

• 5-10.033V
  

  Götzen, N., Windolf, M., Morlock, M. (2005), Die Genauigkeit des Vicon® Motion-Analysis-Systems - experimentelle Analyse unter Einsatz eines Kalibrier- und Messroboters. Jahrestagung der DGfB, Hamburg, p. 91.

• 5-10.034V
  

  Lechert, B.,Götzen, N., Morlock, M., Wening, J.V. (2005) Proximal verriegelte Hüftendoprothes zur Versorgung von medialen Schenkelhalsfrakturen bei geriatrischen Patienten. Jahrestagung der DGfB, Hamburg, p. 145.

• 5-10.035V
  

  Morlock, M., Westphal, F. (2005), Primary stability of a new short stemmed prosthesis. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 16.

• 5-10.036V
  

  Morlock, M., Meakins, S., Parsons, P., Hardaker, C., Flett, M., Isaac, G., Jin Z. (2005), Optimizing the acetabular cup of a hip surface replacement implant. 18th bi-annual Congress of the South-African Arthroplasty Society, p. 49.

• 5-10.037V
  

  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. Emerging Orthopaedic Technologies: Where Surgeons & Scientist Meet, Flims, p.68-69.

• 5-10.038V
  

  Westphal, F., Morlock, M. (2005), Migration and relative motion of a new short-stemmed hip prosthesis in comparison with a standard shaft prosthesis. EORS 2005 Lissabon, p. 412.

• 5-10.039V
  

  Gebauer, M., Götzen, N., Morlock, M., Püschel, K., Rueger, J., Amling, M. (2005), Biomechanische Analyse humaner Atlasfrakturen. DGU/DGOOC Berlin 2005, M13-1092.

• 5-10.040V
  

  Gebert, A., Imig, H., Morlock, M. (2005), New Technologies in vascular biomaterials-fundametals about stents. Abstracts of free communications, 4th Symposium of Vascular Biometrials, Strasbourg, May 11-13, p. S1.

• 5-10.041V
  

  Peters, J., Gebert, A., Götzen, N., Westphal, F., Morlock, M. (2005), Pressfit als Fixationsmöglichkeit für den femoralen Oberflächenersatz. Abstracts der Konferenz "Innovative Medizin- und Biotechnologie" in Hamburg, p. 42.

• 5-10.042V
  

  Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a bio-mechanical study. Book of Abstracts, Osteosynthese International 2005, p. 105.

• 5-10.043V
  

  Lechert, B., Götzen, N., Stegmann, J., Wening, J., Morlock, M., Püschel, K. (2005), Certified implant failure - biomechanics and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femur. Book of Abstracts, Osteosynthese International 2005, p. 105.

• 5-10.044V
  

  Morlock, M., Bishop, N., Schönwald, M., Katzer, A., Seibel, O., Püschel, K. (2005), Analysis of a large random sample of post mortem retrieved cemented femoral hip implants. ISALM 2005, Rechtsmedizin 15 (4), p. 288.

• 5-10.045V
  

  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Tribologie und Zementiertechnik des Oberflächenersatzes - Wunsch und Wirklichkeit. Minimal invasive Endoprothetik: Kein kurzzeitiger Modetrend, 3. Kölner Kongress, Klinik und Poliklinik für Orthopädie, Köln, p.7-9.

• 5-10.046V
  

  Morlock, M. (2005), Tissue Engineering of Articula Cartilage- The Hamburg Situation. Forum innovative Therapies, Hamburg, p. 1.

• 5-10.047V
  

  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2005), Biomechanical and Histo-Morphological Analysis of Early Failed Hip Resurfacing Implants. International Symposium "Resurfacing of the Hip Joint". An Update, Zürich, April 21-22, 2005. Osteologie (14), Nr. 2, p.36-38.

• 5-10.051V
  

  Gebert, A., Peters, J., Westphal, F., Morlock, M. (2006), Nominal versus actual press fit fixation of a femoral resurfacing implant - an experimental and computational evaluation. ORS San Francisco 2006, p. 677.

• 5-10.052V
  

  Westphal, F., Bishop, N., Honl, M., Morlock, M. (2006) Primary stability of a new short-stemmed uncemented hip prosthesis - a biomechanical in-vitro study. ORS San Francisco 2006, p. 480.

• 5-10.053V
  

  Paetzold, H., Huber, G., Morlock, M. (2006), The influence of dynamic load level and loading amplitude on the creep behavior of functional lumbar spinal units. ORS San Francisco 2006, p. 1222.

• 5-10.054V
  

  Honl, M., Schwieger, K., Morlock, M, Schwenke, T., Jacobs, J., Wimmer, M. (2006), The medial approach in primary total hip replacement surgery, a microinvasive single incision technique in a prospective study. ORS San Francisco 2006, p. 449.

• 5-10.055V
  

  Honl, M., Carrero, V., Kemnitz, M., Morlock, M, Schwenke, T., Wimmer, M. (2006), Bone-patellartendon-bone grafts for ACL reconstruction under static and dynamic loading conditions. ORS San Francisco 2006, p. 1148.0

• 5-10.056V
  

  Müller-Bergen, L., Eggers, C., Huber, G., Morlock, M. (2006), Erzeugung von reproduzierbaren Frakturen in mehrsegmentalen Wirbelsäulenabschnitten. DGU Berlin 2006

• 5-10.057V
  

  Gradl, G., Seetz, C., Morlock, M., Sellenschloh, K., Mittlmeier, T. (2006), Anatomische und biomechanische Evaluation eines neuen minimal invasiven Plattensystems zur winkelstabilen Osteosynthese proximaler Humerusfrakturen. DGU Berlin 2006

• 5-10.058V
  

  Rikli, D., Babst, R., Honigmann, P., Morlock, M., Mittlmeier, T. (2006), In vivo Kraftübertragung im radio-ulno-carpalen Gelenk unter physiologischen Bedingungen. DGU Berlin 2006

• 5-10.059V
  

  Jurda, T., Wening, V., Morlock, M., Püschel, K.(2006), Schulter: Frakturen und Rotatorenmanschette. DGU Berlin 2006

• 5-10.060V
  

  Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), Abrieb von Metall-Metall Oberflächenersatzprothesen im Hüftgelenk - Analyse von 90 Revisionspräparaten. DGU Berlin 2006

• 5-10.061V
  

  Gebert, A., Imig, H., Morlock, M. (2006), Investigation of factors influencing the migration of stent-grafts. 5th World Congress of Biomechanics, München 2006

• 5-10.062V
  

  Morlock, M., Delling, G., Rüther, W., Hahn, M., Bishop, N. (2006), In-vivo wear of hip surface replacements - a comparison of retrievals and simulator results. 5th World Congress of Biomechanics, München 2006

• 5-10.063V
  

  Ilinich, E., Böer, R., Eisenbarth, E., Goepfert, C., Pörtner, R., Morlock, M., Schulte, K. (2006), Biomechanical and biochemical properties of native and in vitro porcine cartilage, a new bioreactor for the cultivation of cartilage with realistic joint loading. 5th World Congress of Biomechanics, München 2006

• 5-10.064V
  

  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Integrated phenotypical characterization of murine vertebral bone. 5th World Congress of Biomechanics, München 2006

• 5-10.065V
  

  Krug, F., Reinecke, S., Oldenburg, G.v., Morlock, M. (2006), The pelvis compression fixator. 5th World Congress of Biomechanics, München 2006

• 5-10.066V
  

  Mischke, C., Huber, G., Morlock, M.M., Wölfel, H.P. (2006), The influence of individual geometry on the results of a numerical model of the lumbar spine - Experimental data and simulation. 5th World Congress of Biomechanics, München 2006

• 5-10.067V
  

  G. Huber, G., Müller-Bergen, L., Heinze, J., Eggers, C., Püschel, K., Morlock, M.M. (2006), Mechanical stability of augmented spinal segments. 5th World Congress of Biomechanics, München 2006

• 5-10.068V
  

  N.E. Bishop, N. E., Klein, A., Schönwald, M., Hahn, M., Püschel, K., Morlock, M. M. (2006), Assessment of the implant-bone interface in 38 post mortem retrieved femoral components. 5th World Congress of Biomechanics, München 2006

• 5-10.069V
  

  Götzen, N., Kummer, T., Schilling, A., Amling, M., Morlock, M.M. (2006), Novel Phenotypic Characterization of the Mouse Skeleton. GAMM 2006, Berlin, Germany.

• 5-10.070V
  

  Morlock, M. (2006), Resurfacing and Bone conserving THA - Scientific basis of Hip resurfacing. APAS, Shanghai.

• 5-10.071V
  

  Morlock, M. (2006), Acetabular biomechanics. APAS, Shanghai.

• 5-10.072V
  

  Morlock, M. (2006), Results of retrieval studies. APAS, Shanghai.

• 5-10.073V
  

  Morlock, M. (2006), Science in Arthroplasty I - all about the articulation - Lubrication in Arthroplasty . APAS, Shanghai.

• 5-10.074V
  

  Kleber, R., Maubach, S., Jung, A., Morlock, M., Siebel, Th. (2006), Erste Erfahrungen und klinischen Ergebnissen 2 Jahre nach Oberflächernersatzprothese Typ ASR Abstraktband, 55. Jahrestagung des NOV, Hamburg, S. 25.

• 5-10.075V
  

  Pörtner, R., Wiegandt, K., Heyland, J., Goepfert, C., Nagel-Heyer, S., Schumacher, U., Morlock, M. (2006), Effect of intermittent loading on redifferentiation of chondrocytes and cartilage formation, Fit 2006, Sylt.

• 5-10.076V
  

  Velten, D., Eisenbarth,E., Schanne, N., Breme, J. (2005), Biomedical Oxide Coatings on Ti-alloys prepared by means of the Sol-Gel Process, Biomaterialien (6)1, 2005 : 22-28

• 5-10.077V
  

  Peters, K., Unger, R.E., Eisenbarth, E., Hoffmann, B., Detsch, R., Schäfer, J., Stumpf, S., Breme, J., Ziegler, G., Kirkpatrick, C.J. (2005), The Intercellular Contact as an Indicator for Compatibility of Biomaterials in Endothelial Cells. Biomaterialien 6 (1), 2005: 7-13

• 5-10.078V
  

  Eisenbarth, E. (2005), Nanotechnologically modified Biomaterials:Studienbrief Postgraduate Distance Studies "Nanobiotechnology",ZFUW, TU Kaiserslautern, April 2005

• 5-10.079V
  

  Eisenbarth, E., Velten, D., Breme, J., (2006), Biomimetic Implant Coatings. Biomolecular Engineering, Elsevier, Biomol Eng. 2006 Jun 6; [Epub ahead of print]

• 5-10.080V
  

  Eisenbarth, E., Velten, D., Müller, M., Thull, R., Breme, J. (2006), Nanostructured niobium oxide coatings influence osteoblast adhesion . J Biomed Mater Res A. 2006 Oct;79(1):166-75.

• 5-10.081V
  

  Hornez, N.C., Chai, F., Eisenbarth, E., Traisnel, M., Breme, J., Hildebrand, H. (2006), Cytocompatibility and bio-corrosion of implant alloys in different cell culture systems Biomaterialien 7 (2), 2006, 82-89

• 5-10.001V
  

  Honl, Matthias (2005) Orthopädische Trennverfahren unter besonderer Berücksichtigung des Strahlschneidens. Habilitation. Technische Universität Hamburg-Harburg.

• 5-10.027V
  

  Götzen, N., Gbara, A., Flinzberg, S., Morlock, M. (2005), Winkelstabile Ostesynthesesysteme bei der Versorgung von Unterkiefer- und Mittelgesichtsfrakturen - numerische Untersuchungen zur Primärstabiltät, Jahrestagung der DGfB, Hamburg, p. 71.

• 5-10.014V
  

  Klestil, T., Morlock, M., Schwieger, K., Sellenschloh, K., Curda, B., Biedermann, R., Hennerbichler, A., Schmoelz, W., Rabl, W., Blauth, M. (2006), Migration of Two Different Cementless Hip Arthoplasty Stems in Combination with Two Different Facture Heads - a Biomechanical in vitro Study, Arch Orthop Trauma Surg. 2006 Mar.

• 5-10.015V
  

  Grant, J., Bishop, N., Götzen, N., Sprecher, Ch., Honl, M., Morlock, M. (2006), Artifical composite bone as a model of human trabecular bone: The Implantbone interface, Journal of Biomechanics Jun 26, [Epub ahead of print].

• 5-10.016V
  

  Westphal, F., Bishop, N., Püschel, K., Morlock, M. (2006), Biomechanics of a new short-stemmed uncemented Hip Prothesis - an in-vitro study in human bone, Clin Biomech 21(8):834-40.

• 5-10.017V
  

  Westphal, F., Bishop, N., Honl, M., Hille, E., Püschel, K., Morlock, M. (2006), Migration and cyclic motion of a new short-stemmed Hip Prothesis - a biomechanical in-vitro Study, Hip International, Vol. 16 S-3, p. 22-29, 2006.

• 5-10.018V
  

  Mischke, Ch., Huber, G., Morlock, M.,Wölfel, H. (2006), Validating a numerical model of the lumbar spine with in vitro experiments, Journal of Sound and Vibration (submitted).

• 5-10.019V
  

  Morlock, M. (2006), Die Biomechanik des Fußes, Wintertagung der österreichischen Gesellschaft für Fußchirurgie, Wien, Jatros Orthoädie, Vol. 11, Nr. 1, p. 12-14, 2006.

• 5-10.020V
  

  Morlock, M. (2006), Gleitpaarung heute und morgen, MedReport, Nr. 19, Vol. 30, S. 5, 2006.

• 5-10.021V
  

  Honl, M., Schwieger, K., Schwenke, T., Morlock, M., Wimmer, M. (2006), Plain and Abrasive Water Jet Cutting- A new method in Joint Cartilage Repair, submitted

• 5-10.022V
  

  Honl, M., Schwieger, K., Salineros, M., Jacobs, J., Morlock, M., Wimmer, M. (2006), Orientation of the acetabular component: a comparison of five navigation systems with conventional surgical technique, JBJS-Br, Vol. 88 Nr. 10, p. 1401-1405, 2006.

• 5-10.023V
  

  Huber, G., Morlock, M.M., Ito, K. (2006), Consistent hydration of intervertebral discs during in vitro testing, Medical Engineering & Physics (accepted).

• 5-10.024V
  

  Morlock, M., Rüther, W., Hahn, M., Delling, G. (2006), Wunsch und Wirklichkeit - Tribologie und Implantationstechnik des Oberflächenersatzes, Orthopädie im Profil, Vol. 2, Nr. 1, S. 16-17, 2006.

• 5-10.048V
  

  Carrero, V., Betthäuser, A., Morlock, M., Hille, E., Honl, M. (2005), Fixation Methods for BTB-grafts used in ACL reconstruction - a dynamic in-vitro test, Abstraktband 54. Jahrestagung NOV 2005, Hamburg, P30.

• 5-10.049V
  

  Lechert, B., Götzen, N., Stegmann, J., Wening, J.V., Morlock, M., Püschel, K. (2005), Certified Implant Failure - biomechanical and clinical follow up on the fixion PF nail for the treatment of fractures of the proximal femure, Osteosynthese International, Hamburg, O77.

• 5-10.050V
  

  Wenzl, M., Seide, K., Morlock, M., Püschel, K., Wolter, D. (2005), The importance of a locked screw-plate interface in osteosynthesis of the tibial head - a biomechanical study, Osteosynthese International, Hamburg, O104.

Dissertationen

• 5-10.001D
  

  Huber, Gerd (2006) Physiologische Bestimmung der mechanischen Eigenschaften von Bandscheiben. Dissertation. Technische Universität Hamburg-Harburg, (AB Zuverlässigkeitstechnik M-24).

• 5-10.002D
  

  Götzen, Nils (2006) Integrated Phenotypical Characterization of the Murine Skeleton. Dissertation. Technische Universität Hamburg-Harburg.

• 5-10.003D
  

  Bishop, Nicholas E. (2006) Mechanical Stimulation of Bone Healing. Dissertation. Technische Universität Hamburg-Harburg.